Dragon-s-Lair-X68k

44 Commits 1 Branch 0 Tags

2 Commits

Include renames

Author	SHA1	Message	Date
prosolis	f1007a0dbc	Put the frame in a container with no decoder, and find the palette is not free ROADMAP K2. DLXP1: a 49,664 B record that is 97 sectors exactly, no index and no length word, because a packed record's length is geometry rather than content. 582.0 KB/s, which is what FINDINGS 61.9 predicted to the tenth, and it encodes in 3.3 s because there is no k-means in it. px68k's own x68k/gvram.c renders the container's bytes index-exact with the harness computing no interleave -- the only test that can catch an encoder whose byte order is wrong, since a container round-trips against its own inverse either way. Both negative controls fail as they must. The picture is re-derived against this project's builder rather than PIL's (34.05 dB against 61.9's 34.08) and the GGGGGRRRRRBBBBBI word is charged for the first time in this tree: 0.53 dB, on every row, so it moves no comparison. What the control found is the finding. A packed container on a SCENE palette lands exactly on the codec's ceiling, so the whole +2.31 dB is the per-frame palette and nothing else -- and 231 of 256 entries change every frame, which makes a mismatched paint 12.8 dB worse than the correct pairing, on screen for roughly half of every frame slot if buffer mode does not blank. So B2 now decides which packed CONTAINER ships, not only which player. The fallback is already a flag: --scene-palette --no-palette is 30.79 dB, zero churn, 576.0 KB/s and still +2.07 dB on the shipping codec. 62.5 is priced and is a wash: palette first 20.32 dB, palette last 20.33. Claude-Session: https://claude.ai/code/session_01194oWYW8DQXK1SZ2DnChW6	2026-08-25 07:31:05 -07:00
prosolis	2f9f5cc995	Pace the ring, then read the DMAC config out of the IPL ROM: audio is cheap and the disk is not Two sessions that were never separated in the working tree, so they land as one commit. check.sh ALL GREEN before and after both. SESSION 19 -- the ring rig gets a frame clock (FINDINGS 51). src/player/stream.s had no frame clock: it asked for record i the instant it finished i-1, outran any finite pipe, and never let the ring back up. The 49.1 sweep passing at 48 KB was therefore a wrap-correctness result and nothing else. PACE/PACEON ($18034/$18038) hold the decoder to 12 fps, so FR_HEAD-FR_TAIL finally means what it reads as: whole frames the decoder could still draw with delivery stopped dead. PACEON=0 free-runs and is what the wrap gate still uses, so every figure in 49 is unmoved. Paced, on the gate container: 64 KB holds 2 frames, 256 KB holds 7-8, 512 KB holds 14-15, all pixel-exact. Tolerance is ceiling-1, measured by cutting the pipe: 256 KB buys 500 ms of dead pipe, not 583. SLACK IS ACCUMULATED, NOT OWNED. It is built out of pipe-wire and a seek spends all of it. At 488 KB/s a 256 KB ring needs 4.83 s of play to reach its ceiling from empty; 512 KB needs 8.42 s to reach 14. A bigger ring raises the ceiling AND lengthens the climb, so a branch point does not ask "is the buffer big enough" but "has there been enough play since the last one" -- and Dragon's Lair's decision points are seconds apart. The rig now also says WHICH resource is binding: at 460 KB/s every ring from 192 KB to 512 KB is rate-bound at ceiling 4 and never fills, so larger rings are dead RAM in that scene. 20_seek_slack.py is the same model rewritten in Python from record sizes, sharing no code with the Lua producer: 35/35 ceilings inside its bracket. SESSION 20 -- the DMAC configuration was in the IPL ROM the whole time (FINDINGS 52). ROADMAP's "do this first" was to put the ADPCM stream on the bus. That needs a clocks-per-byte figure for the audio channel, and 11_cpu_budget.py was charging audio the DISK's rate -- 5 clk/B, its own help text calling it "single-address, bus held". Audio was being charged the favourable end of B3, a 242 KB/s open question. It never had to be a guess. The IPL ROM programs all four HD63450 channels itself and MAME boots the rig with it, so 21_iplrom_dmac.py reads the configuration out of the image and decodes the MC68450 fields. Eight (address, expected bytes, meaning) sites; a mismatch or an unknown revision exits non-zero. In check.sh, no emulator, milliseconds. ch3 DCR=$80, OCR=$32: dual address, 8-bit port, cycle steal WITHOUT hold, REQG=10 external request. The DMAC arbitrates once per byte with no burst to amortise the 5..8 + 2 over, so an audio byte is 16..19 clocks, not 5 -- the old debit was 3.2x..3.8x small. And on the bus it is still nothing: 651 B/frame is 1.25%..1.48% of a frame, about 4% of what the decoder leaves. P6's bus risk does not materialise. The unit worry was worth checking and nearly right: 15.6 kHz is 8 MHz/512 = 15,625 samples/s, two 4-bit samples to a byte = 7,812.5 B/s exactly, and AUDIO_KBPS=7.8 is that in decimal kB while the tool multiplied by 1024. THE DISK CHANNEL IS PROGRAMMED IDENTICALLY. ch1 (SASI) is DCR=$80 too, and so is ch0. That is 16..19 clocks per delivered byte, where 42.4 brackets W at 5..12 and 42.5 has W=8 already missing 47/120 frames. The only worked example of a disk DMA configuration on this machine sits above the entire bracket, and at that price nothing fits at any container size. It is not scsiexrom.bin so B3 stays open -- what changed is that a cheap configuration is now the thing that has to be SHOWN. W <= 12 is a requirement on the player's DMAC programming, not a range the hardware hands us, and it is now the largest open number in the project, ahead of the rate. An unforced cross-check fell out: 15_bus_occupancy.py's new W sweep puts W=8 at 105.7% of the frame, agreeing with 42.5's 47/120, from mode histograms and bus clocks respectively, two models sharing no code. Also: ADPCM outranks the disk at the arbiter (CPR 1 against 2), so an audio byte never waits and a video byte does -- relevant to 51's smooth-rate delivery model. README MEDIA. stream.lua gains DLX_SNAP_EVERY=1 (needs DLX_PACE, off by default, on no path check.sh takes) and tools/media/make_readme_media.py turns the PNGs into docs/img/. The stills and both clips are MAME's own screen pixels. Building it turned up something worth recording. 116 of 119 captured frames are pixel-exact against dlx.py; three are TORN -- frame n on top, frame n-1 below the tear line -- because MAME captured the screen while the block loop was partway down it. decode.s writes straight to the displayed page (one display path, 28.1), so a real player tears the same way, and this is the first time that consequence has been visible rather than argued. The script ASSERTS the tear and refuses to build otherwise, rather than trimming three frames and reporting "every frame I kept is exact". Second correction the capture forced: the snapshot fires before frame n is decoded, so the obvious reading is that it holds frame n-1 -- it does not, because MAME renders the screen at the end of the machine frame, by which time the 68000 has finished frame n. 11_cpu_budget.py's "validated to within 1 pt" line is also corrected: the model reads 2..10 pt HIGH and by more as the frame gets harder, which was already true before either session. src/player/decode.s is unchanged; decode.bin is still 1,296 B at the same MD5. Claude-Session: https://claude.ai/code/session_01194oWYW8DQXK1SZ2DnChW6	2026-08-24 18:14:01 -07:00

Author

SHA1

Message

Date

prosolis

f1007a0dbc

Put the frame in a container with no decoder, and find the palette is not free

ROADMAP K2. DLXP1: a 49,664 B record that is 97 sectors exactly, no index and
no length word, because a packed record's length is geometry rather than
content. 582.0 KB/s, which is what FINDINGS 61.9 predicted to the tenth, and it
encodes in 3.3 s because there is no k-means in it.

px68k's own x68k/gvram.c renders the container's bytes index-exact with the
harness computing no interleave -- the only test that can catch an encoder whose
byte order is wrong, since a container round-trips against its own inverse
either way. Both negative controls fail as they must.

The picture is re-derived against this project's builder rather than PIL's
(34.05 dB against 61.9's 34.08) and the GGGGGRRRRRBBBBBI word is charged for the
first time in this tree: 0.53 dB, on every row, so it moves no comparison.

What the control found is the finding. A packed container on a SCENE palette
lands exactly on the codec's ceiling, so the whole +2.31 dB is the per-frame
palette and nothing else -- and 231 of 256 entries change every frame, which
makes a mismatched paint 12.8 dB worse than the correct pairing, on screen for
roughly half of every frame slot if buffer mode does not blank. So B2 now
decides which packed CONTAINER ships, not only which player. The fallback is
already a flag: --scene-palette --no-palette is 30.79 dB, zero churn, 576.0 KB/s
and still +2.07 dB on the shipping codec.

62.5 is priced and is a wash: palette first 20.32 dB, palette last 20.33.

Claude-Session: https://claude.ai/code/session_01194oWYW8DQXK1SZ2DnChW6

2026-08-25 07:31:05 -07:00

prosolis

2f9f5cc995

Pace the ring, then read the DMAC config out of the IPL ROM: audio is cheap and the disk is not

Two sessions that were never separated in the working tree, so they land as one
commit. check.sh ALL GREEN before and after both.

SESSION 19 -- the ring rig gets a frame clock (FINDINGS 51).

src/player/stream.s had no frame clock: it asked for record i the instant it
finished i-1, outran any finite pipe, and never let the ring back up. The 49.1
sweep passing at 48 KB was therefore a wrap-correctness result and nothing else.
PACE/PACEON ($18034/$18038) hold the decoder to 12 fps, so FR_HEAD-FR_TAIL
finally means what it reads as: whole frames the decoder could still draw with
delivery stopped dead. PACEON=0 free-runs and is what the wrap gate still uses,
so every figure in 49 is unmoved.

Paced, on the gate container: 64 KB holds 2 frames, 256 KB holds 7-8, 512 KB
holds 14-15, all pixel-exact. Tolerance is ceiling-1, measured by cutting the
pipe: 256 KB buys 500 ms of dead pipe, not 583.

SLACK IS ACCUMULATED, NOT OWNED. It is built out of pipe-wire and a seek spends
all of it. At 488 KB/s a 256 KB ring needs 4.83 s of play to reach its ceiling
from empty; 512 KB needs 8.42 s to reach 14. A bigger ring raises the ceiling
AND lengthens the climb, so a branch point does not ask "is the buffer big
enough" but "has there been enough play since the last one" -- and Dragon's
Lair's decision points are seconds apart. The rig now also says WHICH resource
is binding: at 460 KB/s every ring from 192 KB to 512 KB is rate-bound at
ceiling 4 and never fills, so larger rings are dead RAM in that scene.
20_seek_slack.py is the same model rewritten in Python from record sizes,
sharing no code with the Lua producer: 35/35 ceilings inside its bracket.

SESSION 20 -- the DMAC configuration was in the IPL ROM the whole time
(FINDINGS 52).

ROADMAP's "do this first" was to put the ADPCM stream on the bus. That needs a
clocks-per-byte figure for the audio channel, and 11_cpu_budget.py was charging
audio the DISK's rate -- 5 clk/B, its own help text calling it "single-address,
bus held". Audio was being charged the favourable end of B3, a 242 KB/s open
question.

It never had to be a guess. The IPL ROM programs all four HD63450 channels
itself and MAME boots the rig with it, so 21_iplrom_dmac.py reads the
configuration out of the image and decodes the MC68450 fields. Eight
(address, expected bytes, meaning) sites; a mismatch or an unknown revision
exits non-zero. In check.sh, no emulator, milliseconds.

ch3 DCR=$80, OCR=$32: dual address, 8-bit port, cycle steal WITHOUT hold,
REQG=10 external request. The DMAC arbitrates once per byte with no burst to
amortise the 5..8 + 2 over, so an audio byte is 16..19 clocks, not 5 -- the old
debit was 3.2x..3.8x small. And on the bus it is still nothing: 651 B/frame is
1.25%..1.48% of a frame, about 4% of what the decoder leaves. P6's bus risk
does not materialise. The unit worry was worth checking and nearly right: 15.6
kHz is 8 MHz/512 = 15,625 samples/s, two 4-bit samples to a byte = 7,812.5 B/s
exactly, and AUDIO_KBPS=7.8 is that in decimal kB while the tool multiplied by
1024.

THE DISK CHANNEL IS PROGRAMMED IDENTICALLY. ch1 (SASI) is DCR=$80 too, and so
is ch0. That is 16..19 clocks per delivered byte, where 42.4 brackets W at 5..12
and 42.5 has W=8 already missing 47/120 frames. The only worked example of a
disk DMA configuration on this machine sits above the entire bracket, and at
that price nothing fits at any container size. It is not scsiexrom.bin so B3
stays open -- what changed is that a cheap configuration is now the thing that
has to be SHOWN. W <= 12 is a requirement on the player's DMAC programming, not
a range the hardware hands us, and it is now the largest open number in the
project, ahead of the rate.

An unforced cross-check fell out: 15_bus_occupancy.py's new W sweep puts W=8 at
105.7% of the frame, agreeing with 42.5's 47/120, from mode histograms and bus
clocks respectively, two models sharing no code.

Also: ADPCM outranks the disk at the arbiter (CPR 1 against 2), so an audio byte
never waits and a video byte does -- relevant to 51's smooth-rate delivery model.

README MEDIA.

stream.lua gains DLX_SNAP_EVERY=1 (needs DLX_PACE, off by default, on no path
check.sh takes) and tools/media/make_readme_media.py turns the PNGs into
docs/img/. The stills and both clips are MAME's own screen pixels.

Building it turned up something worth recording. 116 of 119 captured frames are
pixel-exact against dlx.py; three are TORN -- frame n on top, frame n-1 below
the tear line -- because MAME captured the screen while the block loop was
partway down it. decode.s writes straight to the displayed page (one display
path, 28.1), so a real player tears the same way, and this is the first time
that consequence has been visible rather than argued. The script ASSERTS the
tear and refuses to build otherwise, rather than trimming three frames and
reporting "every frame I kept is exact". Second correction the capture forced:
the snapshot fires before frame n is decoded, so the obvious reading is that it
holds frame n-1 -- it does not, because MAME renders the screen at the end of
the machine frame, by which time the 68000 has finished frame n.

11_cpu_budget.py's "validated to within 1 pt" line is also corrected: the model
reads 2..10 pt HIGH and by more as the frame gets harder, which was already true
before either session.

src/player/decode.s is unchanged; decode.bin is still 1,296 B at the same MD5.

Claude-Session: https://claude.ai/code/session_01194oWYW8DQXK1SZ2DnChW6

2026-08-24 18:14:01 -07:00