The decoder has been CPU-bound since FINDINGS 28 while the mode decision
minimised D + lam*R -- distortion against BYTES. decide() now minimises
D + lam*bytes + mu*cycles, and ratectl bisects mu per frame against the
833,333-cycle budget with the lam bisection nested inside it. On the worst
sustained window:
sasi 27.22 -> 26.95 dB, 109.5 -> 109.4 KB/s, 37/120 misses -> 1
scsi 29.90 -> 29.27 dB, 280.0 -> 278.6 KB/s, 51/120 misses -> 1
Bitrate does not move: the byte controller still binds, and mu changes WHICH
modes are bought. V4 is what it stops buying -- 25.2 -> 20.3% of blocks at sasi
and 15.0 -> 5.3% at scsi, where RAW takes it. That is 28.8's inversion in
practice: RAW is dearer in bytes and cheaper in cycles, so only the byte-rich
profile can buy its way out of V4.
Three things worth knowing beyond the headline:
- The one frame that still misses, at both profiles, is FRAME 0 -- no previous
reconstruction, so 100% changed by definition, which is also what a scene
cut is. It comes out at the all-V1 floor of 110.6% and is emitted late on
purpose. Freezing a cut to make a deadline is the worse failure.
- 28.7's "11 frames are impossible" was too pessimistic. That floor held the
SKIP set fixed and asked how cheaply the drawn blocks could be drawn; the
real decision can also MOVE a block to SKIP, which above ~90% non-SKIP is
the only lever left.
- SKIP's price depends on its neighbours (13.25 cycles clustered, 45 mixed),
which a per-block lagrangian cannot see. The way out is that the two uses
need not share a cost function: a ranking constant inside decide(), the
exact clustered rule for the frame-level bisection. vq_hybrid.cycles() is
now the one definition of that rule and 11_cpu_budget.py imports it.
Gated: 09_ratectl_drift.py runs both controllers, both 0/120 drifting frames.
The cost-aware container decodes pixel-exact on the 68000 (120 frames). ON by
default in encode.py; --no-cpu-fit restores session 7. check.sh ALL GREEN.
Still a model, not a measurement, for THIS container: FINDINGS 31's cycle
figures come from vq_hybrid.cycles (within 1 point of the 68000 on four frames
of the session-7 container). Timing this one on the machine is step 1 of the
next session -- it was started and killed for time, and it is slow.
FINDINGS 31. tools/analysis/13_cpu_ratectl.py.
Claude-Session: https://claude.ai/code/session_01194oWYW8DQXK1SZ2DnChW6
prosolis
06b98d4b47