Take the disc mount out of the source, so someone else's copy of the media works

Three files hardcoded /media/reala-misaki/BDROM -- extract.py, 07_motion_survey.py
and check.sh -- which made the pipeline unrunnable for anyone whose disc mounts
anywhere else. DLX_BDROM now overrides it everywhere, defaulting to
/media/$USER/BDROM, so this box is unchanged and another one works. Verified by
running extract.py against a symlinked mount at a different path.

check.sh's failure message names the path it looked at and the variable to set,
instead of assuming udisks put it where this machine puts it.

README gains a "Reproducing this" section: no media ships here and none of it is
redistributable, so it says what you have to bring (the disc) and what is
already packaged (vasm is vendored as a binary with its source tarball; the
k-means is hand-rolled, so numpy and Pillow are the whole Python dependency).
It also names the two gates that SKIP rather than fail -- the px68k second-core
pass and the IPL ROM DMAC gate -- because both live outside this repo and a
silent skip is worth reading as a skip.

One trap called out rather than left to bite: scene selection is a hard-coded
stream number, not a search. A different pressing that numbers its .m2ts files
differently will extract the wrong footage and the green light will PASS on it.

check.sh ALL GREEN.

Claude-Session: https://claude.ai/code/session_01194oWYW8DQXK1SZ2DnChW6

README.md

@@ -125,6 +125,49 @@ mounted) re-runs both display regression tests, the rate-control drift test, the
 display-path coherency counterexample and a 120-frame 68000 decode, then prints
 `ALL GREEN`.
 
+## Reproducing this
+
+**No media ships in this repo, and none of it is redistributable.** Bring your
+own Dragon's Lair Blu-ray. Everything else needed to rebuild every number and
+every picture above is here or is packaged.
+
+You need:
+
+| | |
+|---|---|
+| the disc | loop-mounted read-only. `udisksctl loop-setup -r -f DRAGONS_LAIR.iso` — the tree was built against a decrypted UDF 2.x image (7-Zip cannot read UDF 2.x; use the loop mount) |
+| `python3` | plus **numpy** and **Pillow**. Nothing else — the k-means is hand-rolled rather than pulling in sklearn |
+| `ffmpeg` / `ffprobe` | frame extraction, and the README clips |
+| **MAME** | tested on 0.277, with the `x68000` ROM set. The rigs drive it headless via `-autoboot_script` |
+| vasm (m68k, Motorola syntax) | **vendored**: `tools/vasm/vasmm68k_mot` is a Linux x86-64 binary, with the source tarball beside it to rebuild elsewhere |
+
+Then:
+
+```sh
+export DLX_BDROM=/path/to/your/mounted/bluray    # if not /media/$USER/BDROM
+./tools/bench/check.sh                           # ~3 min, prints ALL GREEN
+```
+
+`DLX_BDROM` is honoured by every tool that reads the disc. Two stages are
+optional and **skip rather than fail** when their input is absent, because both
+live outside this repo:
+
+- `PX68K=/path/to/px68k` — a px68k checkout, for the second-CPU-core gate. This
+  is the cheapest strong test in the tree (seconds, no MAME, no ROMs), and it is
+  what licenses the bus and cycle figures.
+- `IPLROM=/path/to/iplrom.dat` — the X68000 IPL ROM, for the DMAC-configuration
+  gate (FINDINGS 52). Defaults to `~/mame/roms/iplrom.dat`.
+
+To rebuild the stills and clips in `docs/img/` you also need a paced recording
+run — see the header of `tools/media/make_readme_media.py`.
+
+**Scene selection is a hard-coded stream number**, not a search: the gates use
+stream `00020` and `00223` of the disc's 224 `.m2ts` files, which are the ones
+FINDINGS §1 and §25 characterise. A different pressing may number them
+differently, and if so the green light will extract the wrong footage rather
+than fail — check that `tmp/fr_singe/` looks like the Singe encounter (which is
+what the directory is named for) before trusting any figure.
+
 ## Read first
 - **`docs/FINDINGS.md`** — measured hardware facts, content statistics, codec
   decision, and a section on measurement traps that produced three separate

tools/analysis/07_motion_survey.py

@@ -13,10 +13,12 @@ window it picks then gets encoded for real.
 
 Usage: python3 tools/analysis/07_motion_survey.py 00223 [window_seconds]
 """
-import subprocess, sys
+import subprocess, sys, os, getpass
 import numpy as np
 
-STREAM_DIR = "/media/reala-misaki/BDROM/BDMV/STREAM"
+# See tools/encoder/extract.py: DLX_BDROM overrides where the disc is mounted.
+BDROM = os.environ.get("DLX_BDROM") or f"/media/{getpass.getuser()}/BDROM"
+STREAM_DIR = f"{BDROM}/BDMV/STREAM"
 W, H, FPS = 96, 72, 12
 
 def frames(stream):

tools/bench/check.sh

@@ -4,8 +4,14 @@
 # exit means something drifted.
 set -e
 cd "$(dirname "$0")/../.."
-[ -d /media/reala-misaki/BDROM ] || {
-  echo "Blu-ray not mounted. udisksctl loop-setup -r -f DRAGONS_LAIR.iso"; exit 2; }
+# No media ships with this repo. Bring your own disc; DLX_BDROM overrides the
+# mount point, and every tool that reads the disc honours the same variable.
+DLX_BDROM=${DLX_BDROM:-/media/${USER:-$(id -un)}/BDROM}
+export DLX_BDROM
+[ -d "$DLX_BDROM" ] || {
+  echo "Blu-ray not mounted at $DLX_BDROM."
+  echo "  udisksctl loop-setup -r -f DRAGONS_LAIR.iso"
+  echo "  or set DLX_BDROM to where yours is mounted."; exit 2; }
 
 python3 tools/encoder/extract.py 00020 tmp/fr_00020 12 crop
 mkdir -p tmp/snap_verify tmp/snap256

tools/encoder/extract.py

@@ -4,9 +4,14 @@
 Source is 1920x1080 (16:9). The arcade original is 4:3, so we CENTER-CROP to
 1440x1080 by default -- see docs/STATUS.md open question on framing.
 """
-import subprocess, sys, os, shutil
+import subprocess, sys, os, shutil, getpass
 
-STREAM_DIR = "/media/reala-misaki/BDROM/BDMV/STREAM"
+# Where the Dragon's Lair Blu-ray is mounted. Nothing in this repo ships the
+# media -- bring your own disc, loop-mount it read-only, and point DLX_BDROM at
+# the mount if it is not where udisks puts it:
+#   udisksctl loop-setup -r -f DRAGONS_LAIR.iso
+BDROM = os.environ.get("DLX_BDROM") or f"/media/{getpass.getuser()}/BDROM"
+STREAM_DIR = f"{BDROM}/BDMV/STREAM"
 W, H = 256, 192
 
 def duration(path):