Dragon-s-Lair-X68k/docs/FINDINGS.md

# Findings — session 1 (2026-08-23)

All numbers here are MEASURED unless marked ESTIMATE or FOLKLORE.

---


> **THE DELIVERY RATE HAS NO WORKING FIGURE — retired session 18 (USER
> DECISION).** Sections below written before session 18 name a "4 Mbps" pipe
> constant and score tables against it. **Read every one of those as history.**
> It was never a bus measurement: user-supplied, no provenance, 10% of SCSI-1's
> asynchronous rating (FINDINGS 42.1), and FINDINGS 49.5 caught the shipping
> candidate exceeding it while nothing in the tree was comparing the two.
>
> It is now gone as a default from every analysis tool and from
> `tools/bench/stream.lua` — `--bus` / `--kbps` / `DLX_STREAM_KBPS` are
> **required arguments** with no fallback, so no table can be scored against a
> rate its own output does not state. The one survivor is `GATE_SPAN_KBPS` in
> `tools/bench/check.sh`, which is a **container recipe**, not a delivery claim:
> the gate container was encoded with it and every per-block and span constant
> in FINDINGS 41/43/45/49 is fitted to that container, so changing it is a
> re-encode plus a re-measurement, not an edit.
>
> **What to use instead:** `tools/analysis/19_ring_stream.py` reports the
> **zero-prefill pipe** — the rate a medium must clear for a container to need no
> prefill. That is a requirement to measure a BlueSCSI against, not a constant to
> design on. For the session-14 candidate it is **513.2 KB/s**.

## 1. Source material

`DRAGONS_LAIR.iso` — 16 GB, UDF 2.x, **decrypted** (no AACS dir).
Loop-mounted read-only at `/media/reala-misaki/BDROM` via `udisksctl loop-setup -r -f`.
(7-Zip cannot read UDF 2.x; use the loop mount.)

- **224 `.m2ts` streams**, 1920x1080, **MPEG-2, progressive, 23.976 fps**
- Size histogram: 47 <5MB, 138 5-50MB, 22 50-150MB, 14 150-400MB, 3 >400MB
- The 185 sub-50MB streams are the **arcade branching scenes already split into
  individual clips** — we get scene boundaries for free.
- Big streams are full-feature playthroughs: 00215 (1376s), 00216 (1151s), 00223 (566s)
- Typical scene clip ~60s (00203/00205/00199), some ~100s (00164/00212)

**Gotcha:** clip durations vary wildly. Always read `format=duration` and seek
relative to it. Seeking to a fixed offset silently yields 0 frames on short clips.

---

## 2. GVRAM layout  [verified — see HARDWARE.md for source]

**One 16-bit word per pixel position in EVERY color mode.** Bit depth does not
change VRAM bandwidth; it only subdivides the word.

`addr = page_base + y*1024 + x*2`  — adjacent pixels are 2 bytes apart in all modes.

Consequence: low bit depth buys **no speed**. 16-color mode is strictly worse than
256-color (same bus traffic, 1/16 the palette). Page-alias writes are hardware
auto-masked, so 16-color needs no software read-modify-write — but it's still
one word-access per pixel.

**Chosen: 256 colors, 256x192 active area.**
In 256-color mode P0=low byte, P1=high byte of each word. Sacrificing page 1 as a
double-buffer lets a `move.l` cover two pixel positions, enabling `movem.l` bursts
(12 regs = 48 bytes = 24 pixels). Identical blit cost to 65536-color mode but
**half the on-disk data**.

---

## 3. Content measurements (8 scenes sampled, 5s each at 40% into each clip)

| metric | mean | p90 |
|---|---|---|
| pixels changed / frame | 20.1% | 30.2% |
| **blit cost** | **~64k cycles** | **~97k cycles** |
| naive delta+RLE frame size | 15.5 KB | 19.6 KB |

Budget is **833,333 cycles/frame** @ 12fps on a 10MHz 68000.

### => THE CPU IS NOT THE BOTTLENECK. I/O IS.
Blit uses **under 8%** of budget. The naive row-span+RLE codec achieves only
**3.2:1**, giving **365 KB/s / 470 MB** at 24fps (~183 KB/s / 235 MB at 12fps).

Per-scene variance is extreme: static dialogue ~30 KB/s, action ~700 KB/s.
Any codec needs a hard bitrate ceiling, not just a good average.

### "Shot on twos" — ASSUMPTION FAILED
Dedupe found **zero** duplicate frames across all 8 scenes (`uniq=120/120`,
24.0 fps effective). This Blu-ray is a restoration where every frame is unique.
We do NOT get halved data for free. **Decimation to 12fps must be explicit.**

A weak alternation signature does exist (even-index pairs 40.7% vs odd 27.5%,
ratio 1.5x, with occasional true-duplicate pairs at 0.03-0.19%), but it is
irregular — Bluth mixed ones and twos; action is animated on ones.

---

## 4. MEASUREMENT TRAPS — read before trusting any pipeline number

Three separate false results were produced and caught this session. All three
looked plausible. Guard against them:

1. **Per-frame Floyd-Steinberg dithering destroys temporal coherence.**
   Error diffusion is chaotic: a +/-1 input change cascades across the row and
   produces a completely different index pattern. First run reported 31.5% pixels
   changed with near-zero variance (median 31.6, p90 32.3, max 32.7) while source
   mean-abs-diff was 0.09 — i.e. visually identical frames. That flat variance is
   the tell: **real animation has scene-dependent variance; noise does not.**
   Use no dithering (cel art is flat) or ordered/Bayer (spatially fixed, temporally stable).

2. **Temporal denoise smears motion.** `hqdn3d=4:3:6:4` — the `6:4` are temporal
   params. It flattened real motion, which then measured as "no motion" and
   produced an absurd 0.8 fps / 4 MB result. **Use spatial-only: `hqdn3d=4:3:0:0`.**

3. **Exact-match dedupe fails on a noisy source.** MPEG-2 grain means near-duplicate
   frames differ by +/-1 and are never bit-exact. Use a threshold on
   "% pixels differing by more than N levels", and pick the threshold from the
   observed distribution, not a guess. A 2% threshold ate genuine animation when
   mean consecutive change was only 0.9%.

**Sanity rule: if a result has suspiciously low variance, or is suspiciously
good, it is probably an artifact of the measurement, not a property of the content.**

Scripts kept in `tools/analysis/` — 01 and 02 are marked BROKEN deliberately as
regression references; 03 and 04 are the correct ones.

---

## 5. Storage interface — the SASI/SCSI split

> **SUPERSEDED IN PART.** The claim below that DMA means streaming "costs
> essentially no CPU" is **wrong** — see 19. The bandwidth figures here are
> folklore; the working figure was **4 Mbps = 488 KB/s** (21), and **42.1
> retires that too**: it was never a bus figure. The 50-pin SCSI-1 5 MB/s below
> is the correct bus rating. What binds is not the pipe but `W`, the clocks the
> DMA steals per word — and this section's 8 clk/word is a bracket midpoint,
> not a measurement (39.7, 42.6).

[Yasuma, X68030 internal SCSI controller]

- Interface: **SCSI-1**, 50-pin, 5 MB/s bus spec
- Controller: **Fujitsu MB89352** SPC
- Transfer mode: **DMA** (via **HD63450** DMAC)
- Bus: X68000 original bus, **16-bit @ 10MHz**

**Even on the X68030, SCSI runs at 10MHz 16-bit DMA.** Storage bandwidth does
NOT scale with CPU — the controller sits on the original bus. HD63450's 12.5MHz
official ceiling is why the X68030 runs at 25MHz. An "HSCSI" TSR forces PIO/FIFO
transfer instead of DMA but was marginal even at 25MHz.

Because it's DMA, **streaming costs essentially no CPU** — this stacks with the
8% blit utilisation. The 68000 really is nearly idle.

### Model split — IMPORTANT
**The 10MHz models (original X68000, ACE, PRO, EXPERT) use SASI, not SCSI.**
Built-in SCSI starts at the X68000 **Super** (1990) and continues through XVI,
Compact, X68030. SCSI on earlier machines needs the **Sharp CZ-6BS1** board
in an I/O slot (MAME models this: `-exp1 cz6bs1`).

| target | bandwidth | naive codec (365 KB/s) | VQ codec (~30 KB/s) |
|---|---|---|---|
| SASI (stock ACE/EXPERT) | ~300-500 KB/s FOLKLORE | infeasible | comfortable |
| SCSI (Super+, or CZ-6BS1) | ~1 MB/s FOLKLORE | tight but viable | trivial |

Derived bounds (ESTIMATE): 16-bit @10MHz with 4-clock bus cycle = 5 MB/s absolute
ceiling; HD63450 single-address DMA ~8 clocks/word => ~2.5 MB/s practical ceiling,
before SCSI-1 async handshake and drive latency.

**No measured benchmark was obtained — see STATUS.md.** The ~300-500 KB/s and
~1 MB/s figures are folklore-grade; I could not find a primary measurement.

---

## 6. Codec decision: vector quantization (Cinepak-style)

Given ~8x CPU headroom and an I/O ceiling, spend CPU to buy bandwidth.

- Split frame into 4x4 blocks, encode each as a 1-byte index into a per-scene codebook
- Decode = 16-byte copy from a lookup table: nearly free
- A **full** frame = 256*192/16 = **3,072 bytes** — a hard 16:1 floor before delta
- Add block-level delta on top; action scenes ~2-3 KB/frame
- => roughly **30 KB/s, ~40 MB total**, with a *deterministic* bitrate ceiling

Divergence from the SNES project (below): use a **per-scene codebook with delta
updates**, not a per-frame rebuild. We trade adaptivity for bandwidth because we
have 2MB RAM to keep a codebook resident and CPU to spare.

**Risk not yet evaluated:** 4x4 VQ with a 256-entry codebook will visibly soften
detail. Bluth's fine ink linework is what suffers. Prototype and eyeball before committing.

---

## 7. Comparison: astrobleem/SNES-SuperDragonsLairArcade

Reached the **same core architecture independently** — "512 tiles per frame" is
vector quantization (8x8 codebook + tilemap). Good validation.

But: the SNES PPU has **no bitmap mode**, so tiles are forced on them by display
hardware. The X68000 has a real linear framebuffer, so VQ is a *compression
choice* we can tune or drop per-scene.

**MSU-1 is a bandwidth cheat we don't have.** It's a modern flash-cart coprocessor
giving memory-mapped streaming the real SNES never had. Their budget: 512 tiles x
32 bytes (4bpp 8x8) + tilemap ~= 18 KB/frame => **~430 KB/s** at 23.976fps.
That's *higher* than the 365 KB/s we'd reject on SASI. (ESTIMATE: my arithmetic on
their stated tile budget, not a measured figure.)

Where we're ahead: 256 simultaneous colors from a 65536 palette vs their 4bpp
sub-palettes needing a tile-aware palette optimizer plus a spatial smoothing pass
to hide 8x8 palette seams. That problem doesn't exist for us. Plus 68000@10MHz
vs 65816@3.58MHz, and 2MB vs 128KB.

**Most valuable thing in that repo is NOT the codec — it's `data/events/`:**
516 chapter definitions across 29 scenes as XML, plus
`data/chapter_event_inventory.md`. That's the arcade scene graph and input-timing
structure, entirely hardware-independent — the whole game-logic layer we'd
otherwise reverse-engineer from the arcade ROM.

**TODO: check their license before planning to reuse it.**
Their 516 chapters are finer-grained than our 224 Blu-ray streams, so mapping
their event table onto our footage means subdividing streams by timecode.

Caveat: all of the above is from README/repo-tree summaries, not their source.

---
---

# Findings — session 2 (2026-08-23)

## 8. CORRECTION to session 1: halving the framerate does NOT halve the bitrate

> **PARTLY SUPERSEDED.** The framerate correction stands. The
> "changed-spans + deflate = 247 KB/s" figure is a **compression upper bound,
> not a shippable design** — deflate decode does not fit the 68000's frame
> budget. See 17.2.

Session 1 measured 365 KB/s for naive delta+RLE at 24 fps and wrote
"(~183 KB/s at 12fps)". **That extrapolation is wrong.** Decimating to 12 fps
roughly doubles the per-frame delta, so the *rate* stays nearly flat.

Re-measured directly on 12 fps decimated frames (4 scenes, 66 frames):

| codec (all LOSSLESS w.r.t. the 256-colour frame) | B/frame | KB/s @12 | 22 min | ratio |
|---|---|---|---|---|
| raw 8bpp 256x192 | 49152 | 576 | 743 MB | 1.0:1 |
| session 1 row-span + RLE | 29055 | 340 | 439 MB | 1.7:1 |
| XOR vs prev + deflate | 30196 | 354 | 456 MB | 1.6:1 |
| **changed-spans + deflate** | **21110** | **247** | **319 MB** | **2.3:1** |
| changed-spans + LZMA | 18759 | 220 | 283 MB | 2.6:1 |

Session 1's own RLE re-measured at 12 fps gives **340 KB/s, not 183**.
Any plan that assumed 183 KB/s was based on a bad number.

Deflate-class entropy coding on top of the span payload is worth **1.4x** over
hand-rolled RLE, and LZ decode is cheap on a 68000 (byte copies), so the
lossless floor is ~247 KB/s / 319 MB. That is **infeasible on SASI** and
**tight but real on SCSI**.

## 9. Flat 4x4 VQ at k=256 is NOT acceptable — confirmed by eye

The risk flagged in 6 is real. At k=256, 4x4:

| scene | palette-only PSNR | after VQ | VQ loss |
|---|---|---|---|
| 00010 | 38.35 | 29.68 | 8.67 dB |
| 00020 | 39.90 | 32.67 | 7.22 dB |
| 00146 | 35.25 | 29.35 | 5.89 dB |
| 00181 | 41.92 | 32.87 | 9.05 dB |

Visually: Dirk's face disintegrates, teeth and eyes turn to mush, ink outlines
break into 4-pixel stair-steps, colour bleeds across block boundaries.

![flat 4x4 VQ failure](images/flat_vq_failure_00010.png)
*Left: 1080p source. Middle: 256-colour palettised 256x192 — the quality ceiling,
and it is excellent. Right: flat 4x4 VQ at k=256. This is the result that killed
the flat-VQ architecture.*

**Crucially, the 256-colour palettised frame itself looks excellent.** Flat cel
art with a per-scene median-cut palette and no dithering is near-transparent
(35-42 dB). So the palette is not the problem and 256 colours is not the
problem — **block VQ is**. The quality ceiling we should hold ourselves to is
the palettised frame, not the 1080p source.

## 10. Hybrid VQ (Cinepak V1/V4 + SKIP) — this is the codec

Per 4x4 block, choose by rate-distortion: SKIP (reuse previous frame),
V1 (one 4x4 codeword, 1 byte), or V4 (four 2x2 codewords, 4 bytes),
with a 2-bit-per-block mode header. `lam` is the lagrangian rate knob.

Measured, k1=k4=256, 4 scenes (mean of the per-scene table in the session log):

| lam | PSNR | loss vs palette | SKIP% | V1% | V4% | B/frame | KB/s @12 |
|---|---|---|---|---|---|---|---|
| 0 (max quality) | 33.9 | 4.9 | 30.8 | 18.5 | 50.8 | 7574 | 88.8 |
| 200 | 31.9 | 5.9 | 44.0 | 37.6 | 18.4 | 4183 | 49.0 |
| 1000 | 31.6 | 7.3 | 47.4 | 47.7 | 4.9 | 2841 | 33.3 |
| 5000 | 25.5 | 13.3 | 55.6 | 44.4 | 0.0 | 2134 | 25.0 |

At a **matched ~30 KB/s** the hybrid beats flat 4x4 VQ by ~1 dB, and unlike flat
VQ it keeps scaling: at 89 KB/s it reaches within **4.9 dB of the palette
ceiling**, which flat VQ cannot reach at any bitrate.

Note V4% collapses to 0 at lam=5000 — that is the knob doing exactly what it
should: under a hard ceiling, detail blocks are the first thing sacrificed.

## 11. Codebook size sweep (flat 4x4, for reference)

> **SUPERSEDED.** The k=1024 result below is an artifact of a rate model that
> charged 1 byte for a 10-bit index. k=256 ships. See 14.

| block | k | PSNR | loss | key B | changed% | KB/s @12 | codebook RAM |
|---|---|---|---|---|---|---|---|
| 4x4 | 256 | 30.46 | 8.39 | 3072 | 52.7 | 28.5 | 8K |
| 4x4 | 1024 | 32.89 | 5.96 | 3840 | 56.6 | 35.6 | 32K |

+2.4 dB for 24K more RAM and 7 KB/s. With 2 MB of RAM, a 1024-entry codebook is
cheap and clearly worth it. (RAM figure is the word-expanded form the blitter
wants: k * 16 px * 2 bytes.)

## 12. Source framing — OPEN

The Blu-ray is **full-frame 1920x1080 16:9 with no pillarboxing**. The arcade
original is 4:3. The extractor currently centre-crops 1440x1080, which is the
arcade-faithful choice but discards image the 2006 remaster added. Options are
`crop` (default), `squash`, `wide` in `tools/encoder/extract.py`.
**Not yet decided; needs an eyeball comparison against arcade reference.**

## 13. Stream inventory correction

Session 1 said "typical scene clip ~60s". Sampled directly: the ~3-5 MB streams
are **1.2-1.7 s** clips — these are the individual arcade death/action moments,
which is exactly the granularity the game logic needs. Some 60 s streams
(e.g. 00203) are **menu screens, not content**. Any survey must classify
menu vs content before averaging, or the bitrate numbers are diluted by static
menus.

## 14. A FOURTH false-good result — and the correction

Add this to the 4 list. The mechanism was new but the shape was identical.

**The false result:** flat and hybrid VQ both showed **+2.4 dB for k=1024 over
k=256** at an apparently similar bitrate, which made a 1024-entry codebook look
like an obvious win. The k=1024 quality ladder rendered from that run looked
great at "45 KB/s".

**The bug:** the rate-distortion model in `vq_hybrid.encode()` charged **1 byte**
per codebook index unconditionally. A 1024-entry codebook needs a **10-bit index,
stored as 2 bytes**. So every k=1024 measurement understated the V1 and V4
payload by exactly 2x, *and* the lagrangian mode decision was choosing V4 on the
belief that four codewords cost 4 bytes when they cost 8.

**After charging the true index cost** (`idx_bytes` is now explicit and defaults
from the codebook size), matched-bitrate comparison on scene 00020:

| KB/s | k=256 (1-byte idx) | k=1024 (2-byte idx) |
|---|---|---|
| ~32-42 | **33.87 dB** @ 32.5 | 28.91 dB @ 42.3 |
| ~44-52 | **34.80 dB** @ 44.1 | 35.13 dB @ 52.5 |
| ~72-86 | **35.87 dB** @ 72.2 | 36.51 dB @ 86.0 |

k=1024 buys +0.3 to +0.6 dB for +19% bitrate — a wash at best — and at the low
end where the SASI profile lives it is **5 dB worse**, because the 2-byte index
floor dominates once V4 is priced out.

**k=256 with 1-byte indices is the shipping choice.** It is also the better
decoder: a plain `move.b` index with no alignment case, and an 8 KB codebook
instead of 32 KB.

**The general lesson, again:** the comparison was not wrong about VQ, it was
wrong about *cost*. When a knob looks like a free win, check that the rate model
is charging for it. Same failure family as 4.1-4.3: a plausible number produced
by a pipeline that was not measuring what it claimed to measure.

## 15. Rate-distortion curve of the shipping codec (k=256, corrected)

Scene 00020 (Dirk screaming, close-up face — the hardest case for linework),
and 00146. Includes the 2-bit-per-block mode header. No entropy coding yet.

| lam | 00020 PSNR | 00020 KB/s | 00146 PSNR | 00146 KB/s | SKIP | V1 | V4 | RAW |
|---|---|---|---|---|---|---|---|---|
| 25 | 38.68 | 182.2 | 31.04 | 193.5 | ~37% | ~24% | ~13% | ~26% |
| 100 | 35.87 | 72.2 | 29.04 | 72.5 | ~41% | ~34% | ~21% | ~4% |
| 300 | 34.80 | 44.1 | 28.28 | 44.4 | ~44% | ~42% | ~14% | 0% |
| 800 | 33.87 | 32.5 | 27.77 | 36.1 | ~46% | ~48% | ~5% | 0% |
| 2000 | 27.57 | 25.5 | 24.88 | 30.2 | ~50% | ~49% | ~1% | 0% |

Palette ceilings: 00020 = 39.90 dB, 00146 = 35.25 dB.

![quality ladder](images/quality_ladder_00020.png)
*The shipping codec across the rate knob. Top: source, palette ceiling, lam=25.
Bottom: lam=100 (`scsi` profile), lam=300 (`sasi` profile), lam=800.
Both shipping profiles hold Bluth's linework; the failure only starts past lam=800.*

Two things to read off this table:
- **The cliff is between lam=800 and lam=2000.** That is where V4 is priced out
  entirely and detail blocks have nowhere to go. Do not ship past lam~800.
- **RAW is doing real work at high bitrate** (26% of blocks at lam=25) and
  vanishes by lam=300. It is what makes the top of the curve reach the palette
  ceiling, and it costs the decoder nothing — RAW is the cheapest mode to blit.

## 16. Licences cleared for the game-logic layer

Both checked this session:

- **astrobleem/SNES-SuperDragonsLairArcade — MIT**, "Copyright (c) 2026 Chad
  Doebelin". `data/events/` holds 516 XML chapter definitions with timing and
  event data. Reusable with attribution.
- **icculus/DirkSimple — zlib.** Independent from-scratch reimplementation of
  the game logic in Lua, scene/timing tables in `game.lua`. Also permissive.

Having **two independent permissively-licensed transcriptions** of the arcade
scene graph is better than one: they can be diffed against each other to catch
transcription errors before any of it is committed to 68000 tables.

## 17. The profiles were set far too low — and entropy coding is a CPU trap

> **PARTLY SUPERSEDED.** 17.1's diagnosis (the profiles were not derived from
> hardware) and 17.2's CPU analysis both stand. But 17 reasoned against a
> misread bandwidth of 4 MB/s; the correct figure was taken as **4 Mbps =
> 488 KB/s**, so the "ship pixel-exact if SCSI sustains >=800 KB/s" conclusion
> in 17.5 was withdrawn. See 18 and 21.
>
> **17.5 IS REINSTATED BY 42.3.** The 488 KB/s figure that withdrew it was
> itself unsourced, and the delivered stream is 837.4 KB/s at 0.29 dB off the
> palette ceiling — 17.5's threshold and 17.5's conclusion, arrived at from the
> other end five sessions later. Its reasoning was sound; only its bandwidth
> number was wrong, and it was wrong in the direction that made it look wrong.

Prompted by the user asking why the SCSI profile was only 75 KB/s. It should not
have been. Two separate errors, one of them serious.

### 17.1 The profile bitrates were not derived from the hardware at all

They were read off the knee of the rate-distortion curve and then presented as
though bandwidth-driven. Against the (folklore) bus figures from 5:

| profile | was | bus figure | utilisation |
|---|---|---|---|
| `sasi` | 45 KB/s | ~300-500 KB/s | **12%** |
| `scsi` | 75 KB/s | ~1 MB/s | **7%** |

Nothing justified leaving 90% of the pipe unused. Raised to `sasi` 110 KB/s
(lam=60) and `scsi` 280 KB/s (lam=10), which is 35% and 28% utilisation —
still conservative, because the bus figures are folklore.

### 17.2 CPU is NOT the reason to stay low — but entropy coding would be

Budget is 833,333 cycles/frame at 12 fps. At session 1's measured ~6.5 cycles
per GVRAM pixel write:

| work | cycles | % of budget |
|---|---|---|
| blit 20.1% of pixels (session 1's 24fps figure) | 64k | 7.7% |
| blit 40% of pixels (the same content at 12fps) | 128k | 15.3% |
| **blit the FULL frame, every frame** | **319k** | **38.3%** |
| deflate decode, ~30 KB/frame output | 1,800k | **216%** |
| LZ4/LZSS decode, ~30 KB/frame output | 450k | **54%** |

Two conclusions, and the second one corrects 8:

- **Raising the VQ bitrate is nearly free on CPU.** Even a full-frame pixel-exact
  blit fits in 38% of budget, and VQ decode is table copies — RAW, the mode that
  dominates at high bitrate, is the *cheapest* mode to blit, not the dearest.
- **The 247 KB/s "lossless changed-spans + deflate" figure in 8 is a compression
  upper bound, NOT a shippable design.** Deflate's Huffman decode is bitwise and
  costs about 2.2x the entire frame budget on a 68000. Even byte-oriented LZ4 at
  54% leaves too little beside a 38% blit. **Do not plan on entropy coding.**
  All profile bitrates are raw payload.

This inverts session 1's "the CPU is idle, I/O is the ceiling" for the *decode*
path specifically: the blit is cheap, but any bit-oriented decompressor is not.
VQ is the right architecture precisely because its decode is a table copy.

### 17.3 The hybrid at lam=0 IS the lossless codec

Measured, un-entropy-coded raw payload, and deflated for reference only:

| scene | lam=0 raw | lam=0 deflated | lossless changed-spans+deflate | PSNR |
|---|---|---|---|---|
| 00020 | 442.1 KB/s | 274.5 KB/s | 267.3 KB/s | 39.90 = ceiling |
| 00146 | 467.6 KB/s | 223.2 KB/s | 219.1 KB/s | 35.25 = ceiling |

The hybrid at `lam=0` converges to within 3% of the purpose-built lossless coder.
That confirms the architecture unifies: there is no separate lossless path to
maintain, just the same bitstream with the knob open.

### 17.4 Full curve in raw (shippable) bytes

| lam | 00020 PSNR | 00020 KB/s | 00146 PSNR | 00146 KB/s | RAW% |
|---|---|---|---|---|---|
| 0 | **39.90** (exact) | 442.1 | **35.25** (exact) | 467.6 | ~76% |
| 10 | 39.38 | 248.1 | 32.27 | 305.2 | ~44% |
| 25 | 38.68 | 182.2 | 31.04 | 193.5 | ~26% |
| 60 | 36.94 | 108.0 | 29.61 | 103.1 | ~10% |
| 150 | 35.31 | 55.6 | 28.63 | 56.1 | ~1% |
| 300 | 34.80 | 44.1 | 28.28 | 44.4 | 0% |

### 17.5 This makes the blocked disk benchmark critical-path

Session 1 judged it "NOT on the critical path" because VQ at 30 KB/s was correct
whether SASI did 300 or 600 KB/s. That reasoning no longer holds. The profiles
now sit at 110 and 280 KB/s, close enough to the folklore ceilings that the
error bars matter, and **if SCSI sustains >=800 KB/s the correct `scsi` profile
is lam=0 — pixel-exact video.** Whether this port ships transparent or lossy on
SCSI is now waiting on one measurement.

## 18. Peak-to-mean burstiness — the mean was hiding the problem

> **SUPERSEDED — DO NOT ACT ON THIS SECTION.** The peak-vs-sustained comparison
> below is the **wrong test**. With a ring buffer the correct test is cumulative
> demand vs cumulative supply, and both profiles pass it with **zero required
> prefill**. `scsi` at lam=10 ships. See 21. The per-frame peak numbers
> themselves are still valid data; only the conclusion drawn from them is wrong.

Prompted by the user clarifying that the bandwidth figure is **4 Mbps = 488 KB/s**,
not 4 MB/s. That is ~8x tighter than what 17 was reasoning against, and it
changes the answer.

Per-frame instantaneous rate (video + 7.8 KB/s audio), 12 fps:

| scene | lam | mean | p90 | **max** | peak/mean | max as % of 488 KB/s |
|---|---|---|---|---|---|---|
| 00010 | 60 | 95.0 | 127.3 | 138.8 | 1.46 | 28.4% |
| 00010 | 10 | 198.9 | 266.1 | 284.0 | 1.43 | 58.2% |
| 00020 | 60 | 115.8 | 155.4 | 222.3 | 1.92 | 45.5% |
| 00020 | 10 | 255.9 | 391.2 | **470.8** | 1.84 | **96.4%** |

**The `scsi` profile as committed in f0f2f80 does not fit 4 Mbps.** Its mean is a
comfortable 52% of the pipe, but it peaks at 96.4% — and a frame that arrives
late is a *dropped frame*, not a slow one. Sizing a real-time stream on the mean
is the mistake; peak/mean is 1.4-1.9x on 1.2-1.7s clips and will be worse across
a full scene.

Two ways out, and only one is good:
- Size for the peak: `lam=25`, mean 194 KB/s. Costs a full step of quality.
- **Rate-control to the mean and carry a leaky bucket:** `lam=10` fits, and buys
  back +0.7 dB (00020) / +1.2 dB (00146).

`ratectl.py` was written in session 2 but **never wired into `encode.py`**. This
demotes that from a loose end to the highest-value unfinished work in the repo.

## 19. Cycle-stealing DMA is not free DMA — 5 was wrong

FINDINGS 5 concluded "because it's DMA, streaming costs essentially no CPU —
this stacks with the 8% blit utilisation. The 68000 really is nearly idle."

The HD63450 steals bus cycles from the 68000 at roughly 8 clocks per 16-bit word:

| stream | words/s | clocks/s | CPU stolen | + full-frame blit |
|---|---|---|---|---|
| 110 KB/s | 56,320 | 450,560 | 4.5% | 42.8% |
| 250 KB/s | 128,000 | 1,024,000 | 10.2% | 48.5% |
| 450 KB/s | 230,400 | 1,843,200 | 18.4% | 56.7% |
| 488 KB/s | 249,856 | 1,998,848 | 20.0% | 58.3% |

At the rates the profiles now use, streaming costs **10-20% of the machine**.
Still affordable — nothing here breaks — but **bandwidth and CPU are one budget,
not two**, and any future headroom argument has to spend from both. The
"nearly idle" framing should not be reused.

(The 8 clocks/word figure is session 1's ESTIMATE from HD63450 timing, not a
measurement. It is the weakest link in this table.)

## 20. Where the profiles should come from

`tools/encoder/profile_gen.py` now derives lam from a bandwidth figure rather
than from the shape of the RD curve, accounting for audio, peak/mean, and
reporting DMA steal. Full benchmarking methodology — and why MAME cannot answer
the bandwidth question — is in `docs/BENCHMARK.md`.

The 4 Mbps figure itself is **user-supplied and its provenance is not recorded**.
Every profile now hangs off it, so it is worth pinning down.

## 21. Correction to 18 — the peak test was the wrong test

18 flagged that `scsi` "does not fit 4 Mbps" because a frame peaked at 96.4% of
the sustained rate. **That was the wrong comparison**, and the user was right to
push back. It measured instantaneous frame demand against a sustained rate as if
they had to match frame-by-frame. They do not: the disk keeps filling *during*
the frame, and any shortfall is absorbed by a ring buffer.

The correct test is whether **cumulative** demand ever outruns cumulative supply.
Simulated at a constant 488 KB/s fill, 12 fps, using the real per-frame sizes:

| scene | lam | mean KB/s | worst frame | **required prefill** | stall tolerance @256KB |
|---|---|---|---|---|---|
| 00010 | 10 | 198.9 | 23.67 KB | **0.0 KB** | 15.4 frames |
| 00020 | 10 | 255.9 | 39.23 KB | **0.0 KB** | 12.0 frames |
| 00146 | 10 | **313.0** | 42.10 KB | **0.0 KB** | 9.8 frames |
| 00181 | 10 | 211.1 | 25.25 KB | **0.0 KB** | 14.6 frames |
| (all) | 60 | 95-116 | 11-19 KB | **0.0 KB** | 26-32 frames |

Fill delivers **40.69 KB per frame time**. Only one measured frame exceeds that
(00146, 42.10 KB) and it is recovered by the following frame. **No scene needs
any prefill at all**, and a 256 KB buffer — 12.5% of RAM — carries ~1 second of
stall tolerance at `lam=10`, which is orders of magnitude more than an SD-backed
seek requires.

`scsi` at `lam=10` stands. The hardest scene sampled (00146) runs 313 KB/s mean,
64% of the pipe, with zero underrun risk.

### Why SD-backed changes the sizing rule
The deployment target is BlueSCSI / SCSI2SD, not a period spinning drive. That
was noted as a caveat in 5 but its consequence was not carried through:

- The sustained rate is a **bus-limited constant**, not an average over variable
  seek latency. There is no long tail to leave margin for.
- Seek is ~microseconds, so branch-point stalls are a non-issue against a buffer
  measured in whole seconds.
- Therefore we can size much closer to the ceiling than spinning-disk practice
  would suggest. Conservative margins here are cargo-culted from a constraint
  this deployment does not have.

**The SASI/SCSI split is about BUS PROTOCOL, not media.** SD emulation removes
seek latency from both, but a SASI bus is still slower than a SCSI one. Two
profiles remain the right design; both are now predictable constants rather than
distributions.

### What rate control is actually for now
Its value drops from load-bearing to **insurance**. Intra-scene peaks are a
non-problem. But we have measured **4 clips of 1.2-1.7s** out of 224 streams, and
00146 already runs 23% hotter than 00020. A sustained action sequence could
plausibly exceed the pipe where a 1.7s clip does not. Rate control gives a
*deterministic ceiling* across content we have not measured yet — which was the
original reason for choosing VQ over a lossless delta in the first place.

Still worth wiring in. No longer a blocker for shipping `scsi` at `lam=10`.

## 22. The display path, measured — first real frame on the X68000

Everything before this section was Python-side or a headless `-video none` run.
This is the first time pixels reached an emulated X68000 screen, and it produced
four hardware facts and one blocker that no amount of reasoning would have found.

**Scope — read this before quoting the result.** The X68000's *video* hardware
did the rendering: CRTC, GVRAM page decoding and the 15-bit+I palette lookup are
all genuinely emulated, which is why the output is bit-exact against the
hardware's colour math. But the pixels were written into GVRAM by a MAME Lua
script calling `SP:write_u16()` — the host poking emulated memory. **No 68000
instruction was executed to draw this frame.**

The equivalent is proving a framebuffer works by writing to it from a debugger.
It says the display path is correct; it says *nothing* about whether the 68000
can fill that framebuffer in time. Lua writes cost zero 68000 cycles, so the 38%
full-frame blit estimate that the entire CPU budget rests on remains completely
unvalidated. That is next step (2), the decoder skeleton, and it is untouched.

Reproduce:
```
python3 tools/bench/prep_frame.py <framedir> tmp/frame.bin 0
cd tmp && SDL_VIDEODRIVER=dummy mame x68000 -bios ipl10 -video soft -window \
  -sound none -nothrottle -plugins -autoboot_script ../tools/bench/show_frame.lua \
  -snapshot_directory ./snap -snapview native -seconds_to_run 6
```

### 22.1 The blocker: CRTC R20 bit 11 hides the graphics layer
The IPL leaves **CRTC R20 (`$E80028`) = `0x0B16`**. Bit 11 is *"G-VRAM set to
buffer"*, and MAME's `x68k_v.cpp` bails out of `draw_gfx()` on it outright:

```c
if (m_crtc->gfx_layer_buffer())  // if graphic layers are set to buffer, they aren't visible
    return false;
// x68k_crtc.h:  bool gfx_layer_buffer() const { return BIT(m_reg[20], 11); }
```

While that bit is set, GVRAM writes still land and read back correctly — which
is exactly what makes it so misleading. Six separate attempts at the video
controller (`$E82400/$E82500/$E82600`) rendered black with every register
reading back the intended value. **The video controller was never the problem.**

`R20` bits 9-8 select the colour setup, and this determines how `$C00000` is
decoded: `0x0300` = 65536c (16 bits/word), `0x0100` = 256c (low byte),
`0x0000` = 16c (4 bits). Set `R20 = 0x0116` for our mode.

### 22.2 Monitor contrast: the IPL leaves it at 14, not 15
`$E8E001` bits 3-0 are monitor contrast; MAME does
`m_screen->set_brightness(contrast * 0x11)`. The IPL leaves it at **14**, which
scales all output to 14/15 = 93.3%. Every rendered colour came out ~7% dark
until this was set to 15. **The player must write `$E8E001 = 15` at startup.**

Contrast `0` blanks the screen entirely (`x68k_v.cpp:661`) — that is the cheap
fade-to-black for scene transitions, no palette animation required.

### 22.3 Palette format CONFIRMED (was previously an assumption)
`PALETTE(config, m_gfxpalette).set_format(2, &x68k_state::GGGGGRRRRRBBBBBI, 256)`

```
bit  15..11  10..6   5..1   0
     GGGGG   RRRRR   BBBBB  I        <- I is a shared LSB for all three channels
```
Expansion is `pal6bit((field << 1) | I)`, i.e. `(v << 2) | (v >> 4)`.
With contrast at 15, **all 256 entries render exactly as this predicts** — the
frame is pixel-identical, not merely close. GVRAM line stride is confirmed as
512 words = 1024 bytes, matching `HARDWARE.md`.

### 22.4 A new quality ceiling: the 15-bit palette costs 38.88 dB
> **Superseded by 23.3.** The 38.88 dB figure assumed the shared LSB `I` is
> always 1. Choosing `I` per palette entry by minimum error lifts the ceiling to
> **40.81 dB** on the same frame. The conclusion below ("`scsi` is close to
> display-transparent") is therefore weaker than stated — there is ~2 dB more
> headroom than this section claims.
Section 3 called the 256-colour palettised frame "the real quality ceiling".
That was measured in 24-bit RGB. The hardware palette only stores 5 bits per
channel plus a shared LSB, so there is a **second** quantisation below it:

| stage | PSNR |
|---|---|
| 24-bit palettised source -> X68000 15-bit+I display | **38.88 dB** |
| `scsi` profile codec error (00020, FINDINGS 15) | 39.4 dB |

The codec's error at `scsi` is **the same order as the display's own error**.
On real hardware `scsi` is therefore close to display-transparent, and pushing
`lam` below 10 buys quality the monitor cannot show. This bounds how much the
`scsi` profile is worth raising — it does not change the profiles themselves.

Caveat: measured on one frame (00020 f0001). It is a property of the palette,
not the content, so it should generalise, but it has not been checked across
scenes.

### 22.5 Why the first frame appears twice
GVRAM is a 512-pixel-wide page while the IPL's CRTC is still in its 768-wide
text timing, so the layer repeats at exactly x=512. This is correct hardware
behaviour, not a bug. The player sets its own CRTC mode and the wrap disappears.
No CRTC timing table has been written yet — the harness deliberately keeps the
IPL's timing so that no invented CRTC values are in play.


## 23. A real CRTC mode: 256x192 inside 256x256 (session 4)

Session 3's harness borrowed the IPL's 768x512 text timing and invented no CRTC
values, which is why the frame repeated at x=512 (22.5). This session derived a
real 256x256 mode table from MAME 0.277 source and verified it by snapshot.
Table: `tools/bench/crtc_mode.lua`. Regression test: `tools/bench/verify_frame256.py`.

![256x256 mode](images/x68k_256x256_mode.png)

*Left: palettised source. Right: the emulated X68000's native 256x512 raster —
256 dots wide, 512 scanlines carrying 256 double-scanned graphics rows, with the
192-row picture letterboxed in true black.*

### 23.1 The table, and why it needed no guessing
`refresh_mode()` in `x68k_crtc.cpp` selects the dot clock as
`(reg20 bit4 ? 69.55199MHz : 38.86363MHz) / div`, with `div` from a ladder keyed
on `reg20 & 0x1f`. Three entries matter:

| `reg20 & 0x1f` | div | dot clock | mode |
|---|---|---|---|
| `0x16` | 2 | 34.776 MHz | IPL's 768 wide, 31.5kHz |
| `0x11` | 3 | 23.184 MHz | 512 wide, 31.5kHz |
| `0x10` | 6 | 11.592 MHz | **256 wide, 31.5kHz, graphics double-scanned** |

The IPL's `R00 = 137` gives `m_htotal = (137+1)*8 = 1104` dots, and
`34.776e6 / 1104 = 31500.0 Hz` **exactly**. Holding the same line rate at div 6
needs `11.592e6 / 31500 = 368` dots `= 46` chars, so `R00 = 45`.

`368 = 1104/3` exactly, so every horizontal register is the 768-mode value
divided by three, and the active window divides without remainder:
`(124-28)/3 = 32` chars `= 256` dots. **No horizontal value was recalled or
estimated.** Only the blanking split rounds: the 768 mode is sync/back/front =
14/14/14 chars, `/3 = 4.67` each, and the closest integer triple summing to
`46-32 = 14` is 5/5/4.

| reg | value | meaning |
|---|---|---|
| R00 | 45 | H total, 46 chars = 368 dots -> 31500.0 Hz |
| R01 | 5 | H sync end (3.45 us) |
| R02 | 10 | H display begin -> `hbegin = 81` |
| R03 | 42 | H display end -> `hend = 336`; inclusive width `336-81+1 = 256` |
| R04 | 567 | V total, 568 scanlines -> 55.46 Hz |
| R05 | 5 | V sync end |
| R06 | 40 | V display begin -> `vbegin = 41` |
| R07 | 552 | V display end -> 512 scanlines = 256 double-scanned rows |
| R08 | 27 | H sync adjust (MAME stores it and never reads it) |
| R20 | `0x0110` | display (not buffer), 256-colour, 31.5kHz, 256x256 |

**The vertical registers are NOT halved**, which is the one thing that looks
wrong and is not. The CRTC still generates a 568-line raster; "256 lines" is a
graphics-layer double-scan applied in `draw_gfx()` (`x68k_v.cpp:401`), not a
change to the raster. Halving R04 would ask the monitor for 110 Hz. MAME emits
a `visarea larger then reg[20]` logerror for this; it is cosmetic.

Total blanking time is identical to the 768 mode (112 dots at 11.592 MHz =
336 dots at 34.776 MHz = 9.66 us), which is the property a real monitor cares
about — so this table should be safe on hardware, though that is untested.

### 23.2 MAME's double-scan is phase-shifted by one raster line
`get_gfx_pixel()` indexes `m_gfxbitmap.pix(scanline / divisor, pixel)` using the
**absolute** scanline, and `vbegin = 41` is odd. So in the native 256x512
snapshot the identical row pairs are `(1,2), (3,4), ...` and row 0 is a lone
half-line. Even rows are graphics rows 0..255. This cost a false failure before
it was understood; the regression test now asserts the shifted pairing
explicitly so a change in MAME's behaviour is visible rather than confusing.

### 23.3 The shared LSB `I` must be chosen per palette entry — worth 1.96 dB
Session 3's `pack()` hardcoded `I = 1`. That is not free: `I` is shared by all
three channels and each renders as `pal6bit((field << 1) | I)`, so with `I = 1`
the darkest reachable value is `pal6bit(1) = 4`, and **true black does not
exist**. Choosing `I` per entry to minimise summed squared error over R,G,B:

| rule | ceiling vs 24-bit palettised (00020 f0001) | entries with I=0 |
|---|---|---|
| `I = 1` fixed (session 3) | 38.85 dB | 0 |
| `I` per entry, min squared error | **40.81 dB** | 102 / 256 |

Nearly **2 dB for free**, and 102 of 256 entries want `I = 0` — this is not a
corner case. It supersedes the ceiling in 22.4 and means `scsi` has about 2 dB
more headroom before it hits the display than that section claimed.

The encoder does not yet do this. `tools/encoder/` still emits 24-bit palettes
and the packing happens Lua-side; whatever eventually writes X68000 palette
words must use the per-entry rule.

### 23.4 Letterboxing requires a reserved black palette entry
GVRAM cleared to zero displays **palette entry 0**, and a free mediancut palette
puts a real image colour there — on 00020 f0001 it was `(206,192,176)`, used by
210 image pixels, so it cannot simply be repurposed. A 256x192 picture in a
256x256 mode has 64 blank rows, so the palette must be built with **255 colours
plus a reserved black at index 0** (`prep_frame.py --reserve-black`). Combined
with 23.3, entry 0 also needs `I = 0` or the bars sit at RGB (4,4,4).

Cost: one of 256 entries. Measured quality effect: none visible — the ceiling
figure in 23.3 is already measured on the 255-colour palette.

### 23.5 What is still not proven
GVRAM was again filled from Lua. **No 68000 instruction has drawn a pixel yet**,
and the 38% full-frame blit estimate underpinning the CPU budget remains
unvalidated. What this section adds is that the *target mode* is now real, so
68000 code has a defined geometry to write into: 256 words per visible row, a
1024-byte line stride, and rows 32..223 of a 256-row page.

---

## 24. The blit, measured on the 68000 — the 38% estimate was wrong (session 5)

**The first 68000 instructions in this project to draw a pixel.** Everything in
22 and 23 was GVRAM filled from Lua, which costs zero 68000 cycles. This section
replaces the estimate that the whole CPU budget rested on with a measurement.

Harness: `tools/bench/blit.s` + `tools/bench/blit.lua`. Four variants of a
full-frame 256x192 paint, each looped to run ~4 emulated seconds, timed from
`machine.time` between two flag writes by the 68000 itself.

| variant | what it does | cycles/frame | % of a 12fps frame |
|---|---|---:|---:|
| **V1** | `movem.l` blit from a word-expanded RAM frame (96KB read + 96KB write) | **446,286** | **53.6%** |
| V2 | naive `move.b`/`move.w` per pixel from a byte source | 1,284,174 | 154.1% |
| **V3** | write-only floor — registers preloaded, no source read at all | **225,789** | **27.1%** |
| **V4** | the same 96KB of writes issued in **4x4 block order** | **637,971** | **76.6%** |

The 12fps budget is 833,333 cycles (10.0 MHz confirmed from `x68k.cpp:1133`,
`40_MHz_XTAL / 4`).

### 24.1 The numbers are cross-checked against hand-derived cycle counts
Every variant was predicted from the MC68000 timing tables *before* the run
(`MOVEM.L` M->R `(An)+` = 12+8n, `(d16,An)` = 16+8n; R->M `(An)` = 8+8n,
`(d16,An)` = 12+8n) and then measured:

| | predicted | measured | error |
|---|---:|---:|---:|
| V1 | 447,744 | 446,286 | 0.33% |
| V2 | 1,284,096 | 1,284,174 | 0.006% |
| V3 | 225,792 | 225,789 | 0.001% |
| V4 | 640,704 | 637,971 | 0.43% |

This agreement is the point. A MAME timing number on its own would be worth
little given how many false-good results this project has produced (FINDINGS 4);
two independent derivations landing within half a percent is worth something.
The residual error is the frame-granularity of the measurement — Lua gets no
cycle counter (`luaengine.cpp` exposes `machine.time` and nothing from
`device_execute_interface`), so timing resolution is one video frame, 18.03 ms.

### 24.2 SCOPE: these are instruction cycles, and therefore a LOWER BOUND
MAME's `gvram_w`/`gvram_r` (`x68k_crtc.cpp:501,595`) contain **no timing at
all** — no wait states, no `adjust_icount`. GVRAM in MAME is as fast as main
RAM. Real X68000 GVRAM stalls the CPU on access, so every figure above is a
floor, not a prediction. **Do not quote these as hardware numbers.** Interrupts
were masked (`SR = $2700`) so the IPL's timer and VBL handlers could not steal
cycles into the measurement; a real player will take interrupts on top.

### 24.3 The 38% estimate is dead — a full-frame blit is 53.6%
The realistic "decode into a RAM frame, then blit it" design costs **53.6% of
the frame budget before decoding a single block**, and that is the zero-wait-
state floor. The estimate the CPU budget has been carrying since session 1 was
38%. It was optimistic by 41%.

The cause is visible in the V1/V3 gap: **reading the source frame is exactly
half the total cost** (221,952 of 446,286 cycles). The 68000 pays 8 cycles per
longword read and 8 per longword written, and in 256-colour mode a pixel
occupies a whole word of address space, so a frame is 96KB of traffic in each
direction rather than 48KB.

### 24.4 The high byte of every GVRAM write is discarded — confirmed from source
`gvram_w` case `0x0100` writes `data & 0x00ff` with `mem_mask 0x00ff`. So in
256-colour mode the CPU cannot pack two pixels into one word, and the odd bytes
of a word-expanded source frame never need clearing — V1 exploits this by
leaving them uninitialised. This is why 96KB, not 48KB, is the irreducible
write traffic.

### 24.5 The architecture question, and where it turns over
> **Superseded by FINDINGS 28.1/28.2 (session 7).** The two-path plan below is
> incoherent — the compose path needs a RAM reference the direct path never
> writes — and its two costs are both *copies*, so they were never comparable to
> a decode. The "76.6% x non-SKIP fraction" model is also 2.03x optimistic:
> the four block modes cost 300/448/400 cycles, not one figure. One path ships.

V4 prices the access pattern a decoder that writes codewords **straight into
GVRAM** actually has: 4 rows of 8 bytes at a 1024-byte stride per 4x4 block. The
same 96KB of writes costs **76.6%** in block order versus 53.6% row-linear — the
stride destroys the `movem.l` burst, 208 cycles per block against a theoretical
best of ~150.

But a decoder never writes every block: SKIP blocks cost **nothing at all**, and
the previous frame is already sitting in GVRAM, so **no RAM reference frame is
needed for SKIP to work**. So the two designs scale differently:

- **compose-in-RAM then blit** — flat 53.6%, independent of how much changed
- **decode-direct-to-GVRAM** — 76.6% x (fraction of non-SKIP blocks)

**They cross at 70% of blocks changed.** Below that, writing straight into GVRAM
wins, and it also drops the 96KB RAM reference frame entirely. Above it, the
flat blit wins.

**This makes the non-SKIP block fraction the single most important unmeasured
number in the project.** It is already computable from the encoder — it is a
by-product of the mode decision in `vq_hybrid.py` — and it has never been
reported. Measure it before writing any decoder inner loop, because it selects
which inner loop to write.

### 24.6 The frame the 68000 drew is pixel-exact
V1's output was snapshotted and passes `verify_frame256.py` unchanged: `256x512
native, double-scan exact, active 256x192 pixel-exact, letterbox true black`,
40.81 dB. So 68000 code drives the mode of FINDINGS 23 correctly, and 23.5 is
now closed.

---

## 25. The sustained action sequence, found and measured (session 5)

STATUS has carried "a *sustained* action sequence is the one thing that could
still break the bitrate" as the open risk since session 2. Every clip measured
before this was 1.2-1.7 s. This section closes it: **it does break the profiles,
though not the bus.**

### 25.1 The two largest streams on the disc are not game footage
A survey that sorts 224 streams by size and encodes the biggest would have
measured **live action**:

| stream | size | what it actually is |
|---|---:|---|
| 00216 | 3777 MB | the feature with a **burned-in picture-in-picture commentary** |
| 00215 | 3475 MB | the commentary itself, full-screen live action |
| **00223** | **1802 MB** | **clean animation, 9.4 min — the one to use** |

The PiP in 00216 is burned into video stream 0, not a selectable secondary
stream, so there is no ffmpeg flag that recovers a clean frame from it. This
extends FINDINGS 13's menu-vs-content warning: the classification needed is
**content / menu / bonus**, and bonus material is the one that looks most like
content by every cheap metric (size, duration, bitrate).

### 25.2 Picking the worst window by measurement, not by eye
`tools/analysis/07_motion_survey.py` scans a whole stream at 96x72 and reports
the highest-mean sliding window of inter-frame absolute difference. On 00223:

```
6793 frames @12fps = 566.1s
motion energy  mean 9.40  median 5.60  p90 21.70  max 112.39
hottest sustained 10s window: t = 539.4s  (2.01x stream mean)
quietest 10s window:          t = 144.2s  (0.19x stream mean)
```

The 10.6x spread between the quietest and hottest sustained windows is the whole
argument for not sampling clips by hand. `t = 539.4s` is the Singe endgame.

### 25.3 Both profiles overshoot on that window — rate control is now required
Encoding those 120 frames at the shipping profiles, with the fixed `lam` the CLI
currently uses:

| profile | target | measured | overshoot | PSNR | palette ceiling |
|---|---:|---:|---:|---:|---:|
| `sasi` | 110 KB/s | **129.6 KB/s** | **+18%** | 27.82 dB | 31.33 dB |
| `scsi` | 280 KB/s | **373.8 KB/s** | **+34%** | 30.81 dB | 31.33 dB |
| *(00020 baseline, `sasi`)* | 110 KB/s | 108.0 KB/s | -2% | 36.94 dB | 39.90 dB |

**This reclassifies rate control from insurance to a requirement.** STATUS has
had "wire rate control into `encode.py`" at priority 3-4 since session 2 with the
note "no longer a blocker (FINDINGS 21)". That was true of the clips measured
then. It is not true of this one. `ratectl.encode_rate_controlled()` already
exists and builds a per-frame lam ladder; it has simply never been hooked up.

Note what did **not** break: 373.8 + 7.8 = 381.6 KB/s is still under the 488 KB/s
working figure, so FINDINGS 21's ring-buffer conclusion survives — but at 78% of
the pipe sustained over ten seconds rather than the comfortable margin implied by
1.7 s clips.

### 25.4 The palette ceiling is content-dependent, and on hard content it binds
The 256-colour scene palette costs **31.33 dB** on this window against **39.90 dB**
on 00020 — 8.6 dB worse. Fire, lava and smoke gradients are exactly what a
256-entry mediancut palette handles worst.

This inverts an assumption the project has been carrying. FINDINGS 23.3 put the
X68000 display ceiling at 40.81 dB and treated it as comfortably clear of the
codec's own error. On this content the **scene palette (31.33 dB), not the
display hardware (40.81 dB), is the binding constraint** — and `scsi` is already
within 0.51 dB of it. Spending bits to close that last half-dB is spending them
against a ceiling that is not the display's.

### 25.5 `scsi` collapses to RAW under stress
Mode distribution on this window is qualitatively different from anything
measured before:

| profile | SKIP | V1 | V4 | RAW |
|---|---:|---:|---:|---:|
| `sasi` (lam=60) | 45.6% | 16.3% | 24.2% | 13.9% |
| `scsi` (lam=10) | 26.2% | 5.5% | 7.1% | **61.2%** |
| *00020, `sasi`* | 46.9% | 24.1% | 17.8% | 11.2% |

At `lam=10` the rate-distortion decision finds literal pixels cheaper than any
codeword for 61% of blocks — the codebooks are simply not describing this
content. That is the mechanism behind the +34% overshoot in 25.3, and it is a
rate-control problem, not a codec-structure problem: the RD decision is behaving
correctly for the lam it was given.

### 25.6 The decoder needs BOTH display paths, chosen per frame
> **Superseded by FINDINGS 28.1 (session 7).** Mixing the paths displays stale
> pixels on 70 of these 120 frames. The "median 37.0%, capped at 53.6%" below is
> the cost of an incorrect player; every coherent version is dearer, and plain
> direct-to-GVRAM is the cheapest of them.

Applying FINDINGS 24.5's crossover to the real per-frame distribution:

| | median non-SKIP | p90 | frames over the 70% crossover |
|---|---:|---:|---:|
| `sasi`, Singe window | 48.4% | 82.8% | 36 / 120 (30%) |
| `scsi`, Singe window | 70.8% | 92.4% | 64 / 120 (53%) |
| `sasi`, 00020 | 54.0% | 88.8% | 3 / 14 (21%) |

Neither path wins outright: **30-53% of frames want the flat blit and the rest
want direct-to-GVRAM.** A player that implements both and picks per frame — the
mode headers are parsed before any pixel is written, so the count is free — pays
a median of **37.0%** of the frame budget and is capped at **53.6%**. A player
that implements only direct-to-GVRAM pays up to 76.6% and would miss frames on
the scene cuts.

So the answer to 24.5 is "both", and the selection is a one-line comparison
against a block count the decoder already has in hand.

### 25.7 What this does not measure
One 10 s window of one stream, at fixed lam, with `_paint` still a Python loop.
The full-disc survey is still not done, and the numbers above are the *worst*
window rather than a distribution over content. What has changed is that the
worst case is now a measurement rather than a worry.

---

## 26. Rate control is unsound as written — found before wiring it up (session 5)

FINDINGS 25.3 promoted rate control from insurance to a requirement. Reading
`ratectl.py` before wiring it into `encode.py` turned up a correctness bug that
would have produced exactly the kind of plausible-looking wrong result this
project keeps catching (FINDINGS 4, 9, 14, 18).

### 26.1 The lam ladder desynchronises the encoder from the decoder
`H.encode()` is **temporally recursive**: SKIP blocks are copied from the
previous *reconstruction*, and `prev = out` closes the loop
(`vq_hybrid.py:84-109`). A frame's output therefore depends on every frame
before it in that same run.

`encode_rate_controlled()` runs `H.encode()` once per lam over the **whole
sequence**, building a ladder of independent temporal chains, then picks each
frame from whichever rung fits the budget. When frame *f* comes from rung *i*
and frame *f-1* was emitted from rung *j != i*, the SKIP blocks in *f* reference
a reconstruction **the decoder never saw**.

Measured on the Singe window (`tools/analysis/09_ratectl_drift.py`, 120 frames,
5 rungs, target 110 KB/s):

| | |
|---|---|
| rung switches | **67** over 120 frames |
| frames whose emitted output differs from what the encoder recorded | **111 / 120** |
| worst frame | **21,339 px = 43.4% of the frame** |
| encoder-vs-decoder agreement, worst frame | 27.1 dB |
| reported PSNR overstatement | **0.36 dB** |

The 0.36 dB is the least interesting number here. The encoder is reporting
quality for a reconstruction that will never exist, and 43% of a frame differing
is a visible artefact whatever the mean says.

**The fix is structural, not a tuning change:** `H.encode()` must become
frame-drivable — take `prev` and one lam, return one frame — so rate control can
feed back the frame it actually emitted. The current whole-sequence signature is
what makes the ladder tempting in the first place.

### 26.2 The ladder spans 250x past the shippable range
`lam_hi=2e5`, but FINDINGS 15 puts the quality cliff between lam=800 and
lam=2000 and says do not ship past lam~800. Every rung above ~800 is
unshippable, so a frame that only fits at lam=9457 has not been rate-controlled,
it has been destroyed. Cap `lam_hi` at 800 and let a frame that cannot fit
overrun the bucket — a visible overrun is a better failure than silent garbage.

### 26.3 The ladder is far too coarse where it matters
With `steps=5` the geomspace lands on 1 / 21 / 447 / 9457 / 200000, and **only
two rungs were ever chosen**. The budget is 8,721 B/frame; the two straddling
rungs deliver 23,183 B (lam=21) and 3,071 B (lam=447) — a **7.5x** gap across
the operating point. Rate control cannot land near a target it has to jump over.

The module docstring already describes the right approach — *"per frame we
binary-search lam to land inside a byte budget"* — but the implementation is a
fixed precomputed ladder. Doc and code disagree; the doc is correct.

### 26.4 What does work
The leaky bucket lands the mean where it should: **109.1 KB/s against a 110
target**, with 32% of frames over the per-frame budget and banked by the bucket.
That mechanism is sound and worth keeping. It is the per-frame lam *selection*
underneath it that needs rebuilding, not the bucket.

### 26.5 Cost note before starting
Each rung is a full-sequence encode and `_paint` is still a Python per-block
loop, so a 5-rung run over 120 frames takes minutes. **Vectorise `_paint`
first** — it is already on the list for the full-disc survey and it makes the
rate-control work practical rather than merely faster.

## 27. Rate control, rebuilt and wired in (session 6)

FINDINGS 26 stopped the session-5 rate controller before it shipped: it picked
frames out of independently-encoded whole-sequence runs, so 111 of 120 frames
referenced reconstructions the decoder would never see. The fix was structural,
as 26.1 said it had to be. It is now wired into `encode.py` and **on by
default** for a profile.

### 27.1 The encoder is frame-drivable, and the drift is zero by construction
`vq_hybrid` now exposes one frame at a time — `frame_ctx(m, f, prev)` /
`decide(ctx, lam)` / `paint(m, ctx, mode)` — and `encode()` is a thin loop over
that API. Rate control drives the same three calls and feeds back **the frame it
actually emitted** as the next frame's `prev`. There is no ladder to pick from,
so the desync has no way to occur.

`tools/analysis/09_ratectl_drift.py`, unchanged in what it asserts:

| | session 5 | session 6 |
|---|---|---|
| frames whose emitted output differs from what the encoder recorded | 111 / 120 | **0 / 120** |
| worst frame | 21,339 px (43.4%) | **0 px** |
| reported PSNR overstatement | 0.36 dB | **0.00 dB** |

This is the harder case for that test on purpose: it runs with `lam_lo=1.0`, so
lam moves on 117 of 119 frame boundaries. Under the old ladder, 67 rung switches
were enough to corrupt 111 frames.

### 27.2 Both overshoots are closed, and they cost under 1 dB
The Singe window (FINDINGS 25.3), which is the worst sustained window on the
disc. Totals include the 7.8 KB/s ADPCM allowance:

| profile | target | fixed lam (session 5) | rate-controlled | quality cost |
|---|---|---|---|---|
| `sasi` | 110 KB/s | 137.4 KB/s (**+25%**) | **109.5 KB/s** | 27.82 → 27.22 dB (−0.60) |
| `scsi` | 280 KB/s | 381.6 KB/s (**+36%**) | **280.0 KB/s** | 30.81 → 29.90 dB (−0.91) |

Zero frames hit the lam=800 cliff at either profile, so nothing was destroyed to
get there (26.2's failure mode did not trigger). `sasi` needed lam to reach 183
at worst against a floor of 60; `scsi` reached 58.7 against 10. The controller
is working an order of magnitude below the cliff, which is where the search
range being capped at 800 rather than 2e5 stops mattering at all — and that is
the point: a range that never needs its top is a range you can trust.

`scsi` still sits **1.43 dB** from the scene palette ceiling of 31.33 dB
(FINDINGS 25.4), against 0.51 dB before. The ceiling, not the codec, is still
what bounds this content.

The percentages differ from 25.3's +18%/+34% because those compared video
payload against the total target; the table above compares like with like
(total against total). The payload figures are unchanged: 129.6 and 373.8 KB/s.

### 27.3 Rate control makes the display path cheaper, not dearer
The decoder-architecture numbers of FINDINGS 25.6 were measured on the
fixed-lam encoder. Re-measured under rate control, on the same window, with the
player picking the cheaper of compose-then-blit and direct-to-GVRAM per frame:

| profile | median display cost | frames above the 70% crossover |
|---|---|---|
| `sasi` fixed → RC | 37.0% → **36.6%** | 30.0% → 26.7% |
| `scsi` fixed → RC | 53.6% → **47.1%** | 53.3% → 35.8% |

Raising lam moves blocks to SKIP and V1, which is fewer blocks to write. The
"implement both paths, pick per frame" conclusion is unaffected and the cap is
still 53.6%.

### 27.4 The quality floor barely matters; the prefill matters, wrongly
Two knobs were measured rather than guessed.

**`--rc-floor`** decides whether a quiet frame may spend more than the fixed-lam
profile would. On the Singe window it is worth nothing — 109.5 vs 110.0 KB/s and
**0.00 dB** — because no frame on that window is quiet enough for the bucket to
saturate. The default is `profile` (never spend more than session 5 would), so
rate control cannot regress content that already fits.

**`--prefill`** models how full the player's buffer is at scene start. It is
tempting and it is a trap, so it defaults to 0:

| clip | prefill 0.0 | 0.5 | 1.0 | target |
|---|---|---|---|---|
| Singe, 120 fr, `sasi` | 109.5 | 112.9 | **116.3** | 110 |
| Singe, 120 fr, `scsi` | 280.0 | 289.1 | **298.2** | 280 |
| 00020, 14 fr, `sasi` | 92.0 | **115.8** | **115.8** | 110 |
| 00020, 14 fr, `scsi` | 224.8 | **255.9** | **255.9** | 280 |

(`scsi` on 00020 is the one cell where prefill looks harmless: the clip fits
under 280 either way. That is the content being easy, not the knob being safe.)

Prefill buys a permission to overshoot of exactly `bucket / nframes`. At 8
frames of bucket over 120 frames that is 6.2% — measured — and on a 14-frame
clip the bucket is larger than the clip, so rate control switches itself off and
reproduces fixed-lam exactly (lam never leaves its floor: min = median = max =
60). **A prefill that makes a target look met has disabled the controller.**

### 27.5 The 00020 undershoot is a clip-length artefact, not a bug
At prefill 0 the 14-frame 00020 clip lands at 92.0 KB/s against a 110 ceiling —
0.66 dB given away for nothing. That is the leaky bucket's startup transient:
the first `bucket_frames` frames cannot draw on a bank they have not accumulated.
It is bounded by `bucket / nframes`, so it is 6% on a 10-second window and 20%
on a 1.2-second one.

The lesson is the one FINDINGS 25.3 already taught in a different costume: **a
1.2-second clip cannot be used to judge rate control.** Real scenes are tens of
seconds. Do not tune the bucket against 00020.

Worth recording separately: fixed-lam `sasi` on 00020 delivers 115.8 KB/s — the
supposedly easy clip was **already 5% over its target**, which nothing had
noticed because the profile table quotes its PSNR and not its bitrate.

### 27.6 FINDINGS 26.5's cost premise was wrong in both halves
26.5 said a rate-control experiment was minutes because `_paint` is a Python
per-block loop, and told the next session to vectorise it first. Vectorising it
was correct and it is **17.1x faster**, but it was never the bottleneck, and the
ladder was never minutes. Measured per frame, 256x192:

| | ms |
|---|---|
| `VQ.assign` x2 — codeword search | **22.83** |
| SKIP error against `prev` | 1.40 |
| `decide` — argmin at one lam | 0.06 |
| `paint`, vectorised | 0.29 |
| `paint`, old per-block loop | 4.93 |

`_paint` was 14% of a frame. A 5-rung ladder over 120 frames was ~18 s of
encoding, not minutes — the "few minutes" in the drift test's docstring was
`H.build`'s k-means (51 s), which no amount of vectorising `_paint` would have
touched.

What actually makes per-frame rate control affordable is that `VQ.assign`'s
output depends on **neither `lam` nor `prev`**, so it is computed once per frame
and a lam search only re-runs the 0.06 ms argmin:

| | |
|---|---|
| 12-step per-frame lam search, 120 frames, symbols cached | **0.31 s** |
| the same search by re-running whole-sequence encodes | 49.10 s |

That is a 158x difference, and it is the reason the controller can afford a real
bisection instead of a 5-rung ladder — which was the actual defect in 26.3.

The cache holds **one frame**. At ~133 KB of intermediates per frame, caching
the sequence would cost 900 MB on a 9.4-minute stream to save nothing: every
caller works a frame at a time.

---

## 28. The 68000 decoder exists, is pixel-exact, and does not fit (session 7)

`src/player/decode.s` parses DLX1 and draws frames on the emulated X68000. It is
**pixel-exact across a 120-frame sequential run** of the worst sustained window
on the disc (`tools/bench/verify_decode.py`), exercising all four block modes
and the full temporal recursion — the last frame is only right if every frame
before it was.

It is also **too slow**. On that window, at the shipping `sasi` profile:

| | non-SKIP blocks | measured cost |
|---|---:|---:|
| cheapest frame | 15.4% | 31.5% of a 12fps frame |
| median frame | 47.8% | 73.8% |
| p90 frame | 82.5% | **116.4%** |
| worst frame | 100.0% | **135.8%** |
| mean over the window | 47.8% | **81.7%** |

**31% of frames miss the 833,333-cycle budget**, and like every figure since
FINDINGS 24 these are instruction cycles against zero-wait-state memory, so
they are a floor. This is the first time CPU, not disk, is the binding
constraint — FINDINGS 21 retired the bandwidth worry, and this replaces it.

### 28.1 The dual-path plan of 24.5/25.6 was incoherent, and is withdrawn
FINDINGS 24.5 specified two display paths chosen per frame on the non-SKIP
count, and 25.6 costed the mix at "median 37.0%, capped at 53.6%". Two of its
premises cannot both hold:

- compose-in-RAM-then-blit exists to make the blit **row-linear**, so it must
  assemble a **full** frame in RAM. The pixels it does not decode this frame —
  the SKIP blocks — can only come from a RAM copy of the previous
  reconstruction.
- decode-direct-to-GVRAM's stated advantage is that **"no RAM reference frame
  is needed"**, because the previous frame is already in GVRAM.

So every direct frame silently invalidates the reference the next compose frame
reads. Simulated on the Singe window at the crossover the plan specifies
(`tools/analysis/10_pathmix_drift.py`): **70 of 120 frames display pixels no
correct player would display**, first at frame 2, worst frame 18.8% of the
screen. This is FINDINGS 26 in different clothing — two code paths disagreeing
about what "the previous frame" means — and it is the **sixth** false premise
this project has caught before it shipped.

Every coherent repair is worse than not mixing at all:

| strategy | median | p90 | max | correct |
|---|---:|---:|---:|---|
| mix per frame, as specified | 36.6% | 53.6% | 53.6% | **no** |
| mix, direct also writes the RAM reference | 53.6% | 68.4% | 81.4% | yes |
| mix, re-read GVRAM into RAM on each switch | 36.6% | 107.2% | 107.2% | yes, 13 frames miss |
| compose only | 53.6% | 53.6% | 53.6% | yes |
| **direct only** | **36.6%** | 62.5% | 76.6% | yes |

(Costs in that table are 24.5's own model, for like-for-like comparison; 28.2
replaces the model itself.)

**24.5 also compared the wrong two things.** Its 53.6% and 76.6% are both
*copies* measured in `blit.s` — neither includes decoding. A real compose path
costs decode-into-RAM **plus** the 53.6% blit, so it is strictly dearer than
decoding straight into GVRAM, whatever the block mix. There was never a
crossover to find.

**The decoder therefore implements one path, direct-to-GVRAM**, and drops the
96 KB RAM reference frame entirely.

### 28.2 The four block modes do not cost the same, and V4 is the expensive one
24.5's model — "76.6% of a frame x the non-SKIP fraction" — prices every
non-SKIP block as one `movem.l` burst. Measured separately, with synthetic
single-mode frames (`tools/bench/prep_dlx.py`):

| mode | cycles/block | vs the 24.5 model (207.8) |
|---|---:|---:|
| SKIP, in an all-SKIP header byte | 13.3 | model says 0 |
| SKIP, inside a mixed byte | ~45 | model says 0 |
| V1 (one 4x4 codeword) | **299.9** | 1.44x |
| V4 (four 2x2 codewords) | **448.2** | 2.16x |
| RAW (16 literal indices) | **400.4** | 1.93x |

Applied to the real per-frame histograms (`tools/analysis/11_cpu_budget.py`),
the model reproduces all four frames timed on the 68000 to within **1
percentage point**, and shows 24.5 to be **2.03x optimistic at the median**.

Where the cycles actually go over the window:

| mode | % of blocks | % of cycles |
|---|---:|---:|
| SKIP | 46.4% | 9.2% |
| V1 | 19.8% | 26.1% |
| V4 | **25.2%** | **49.7%** |
| RAW | 8.5% | 15.0% |

**V4 is a quarter of the blocks and half the cycles.** It costs 1.49x a V1 block
while the mode decision in `vq_hybrid.py` charges it only its 4x payload bytes.
The lagrangian trades distortion against *bytes*; on this machine it now has to
trade distortion against *cycles* as well.

### 28.3 The container is big-endian but not aligned, and that is an address error
The DLX1 header docstring says every multi-byte field is big-endian "so the
68000 reads them with a plain `move`". Alignment is the other half of that
sentence and the container does not have it: frame records are
`[u32 length][768-byte mode header][payload]` laid end to end with arbitrary
payload lengths, so record boundaries land on odd addresses.

`move.l (a0)+,d0` at an odd address is an **address error** on a 68000 — not a
slow read. The first run decoded frame 0 perfectly, consumed exactly its 8,715
payload bytes, then read frame 1's length at `$03220F` and vectored into the IPL
at `$FF059A`, where it sat for 59 emulated seconds looking like an infinite
loop. It was found by dumping PC and the address registers, not by reading the
source: the code was correct, the data layout was not.

The decoder now rounds each record start up to 4. **The container should carry
the padding itself** so a streaming player can DMA records into place: measured
cost on this window is **199 bytes over 120 frames — 1.66 B/frame, 20 B/s**
against a 110 KB/s budget. Until `encode.py` does it, `prep_dlx.py` realigns at
load time.

### 28.4 The measurements agree with hand-derived MC68000 timings
As in FINDINGS 24, each figure was derived from the instruction timing tables
before being believed. A V1 block, summing dispatch, index decode, the indexed
`movem.l` load and four `movem.l` stores, plus its quarter share of the header
loop: **298.5 cycles derived against 299.9 measured — 0.5%.** RAW derives to
396 against 400.4 measured (1%). V4 derives to 415 against 448 (7%, the gap
being in the indexed two-register `movem.l`, the mode this decoder uses most
heavily). So these are 68000 cycles, not a MAME artefact.

### 28.5 A full frame does not fit at 12fps in ANY mode
An all-V1 frame — the cheapest possible way to redraw all 3,072 blocks — costs
**921,187 cycles, 110.5% of the budget**. All-V4 is 165.2% and all-RAW 147.6%.

So the ceiling is structural, not a tuning problem: **at 12fps on a 10MHz 68000
no more than ~88% of the screen can change in one frame**, however cheaply it is
coded. Scene cuts change 100% of it. Either a cut gets one late frame (the
outgoing content is unrelated, so this may be free to the eye), or cuts have to
be spread across two frame times, or the framerate has to come down — at 10fps
the budget is 1,000,000 cycles and an all-V1 frame fits.

### 28.6 What this does not measure
One 10 s window of one stream at one profile, and MAME still models no GVRAM
wait states. The `scsi` profile will be worse: FINDINGS 25.5 has it collapsing
to RAW under stress, and RAW is 1.93x the old model's block. Nothing here has
been run on `00020` or on quiet content, where the median frame is far cheaper.

### 28.7 The profiles are an I/O axis; the CPU limit is the clock
`sasi` and `scsi` are two points on one rate-distortion curve, chosen against
**disk bandwidth**. They say nothing about CPU, and the locked target CPU is a
stock 10MHz 68000 for both. So both have to fit the same 833,333 cycles:

| | sasi | scsi |
|---|---:|---:|
| stock / Super, 10 MHz | median 74.4%, **31% of frames miss** | median 94.9%, **42% miss** |
| XVI, 16.67 MHz | median 44.6%, 0% miss | median 56.9%, 0% miss |

Clocks confirmed from MAME 0.277 `x68k.cpp:1133/1194/1200`: `x68000` and
`x68ksupr` are **both** `40_MHz_XTAL/4` = 10 MHz, and only `x68kxvi` is faster
at `33.33_MHz_XTAL/2`. The Super has SCSI at 10 MHz, so a faster bus does not
imply a faster CPU — the XVI column above is headroom, not a target.

`sasi` is the cheaper profile, but choosing it is not a fix: it still misses
31% of frames. The cycle ceiling has to be enforced in the encoder either way.

**How much of the miss is the encoder's to fix.** Re-coding every non-SKIP block
as V1 — the cheapest mode, quality ignored — is the floor any mode assignment
can reach:

| | frames that miss | recoverable by re-coding | impossible at 12fps |
|---|---:|---:|---:|
| `sasi` | 37/120 | 26 | **11** (from 89.8% non-SKIP up) |
| `scsi` | 51/120 | 39 | **12** (from 91.9% non-SKIP up) |

So a cost-aware mode decision can reach about **three quarters** of the misses.
The remaining ~10% of frames are 28.5's ceiling in practice: past ~90% non-SKIP
no mode assignment fits, because the blocks have to be drawn at all. Those
frames need a structural answer — a late frame at a cut, a cut spread over two
frame times, or a lower framerate — not a better encoder.

### 28.8 V4 costs more cycles than RAW, so it is CPU-dominated by it
448.2 against 400.4 cycles. RAW is also pixel-exact where V4 is lossy, so V4's
only advantage is that it costs 4 payload bytes instead of 16. **On the CPU
axis V4 is strictly dominated**, which inverts the mode preference the byte
lagrangian has: an encoder short of cycles but not of bytes should buy RAW
wherever it would have bought V4, and gain quality doing it.

That escape is only open to the byte-rich profile. `scsi` already spends 41.3%
of its blocks on RAW (FINDINGS 25.5 saw it "collapse to RAW under stress" and
read that as a failure; on the CPU axis it is the cheap direction). `sasi` at
110 KB/s cannot afford it, so its only lever is V4 -> V1 -> SKIP, every step of
which costs quality. **The CPU constraint therefore bites harder on `sasi` in
quality terms even though it bites less in cycles.**

Caveat: this ordering is a property of *this* decoder, not of the codec. V4's
cost is four indexed `movem.l` lookups; pairing sub-block rows into
`movem.l d0/d2,(a4)` would save ~16 of 448 cycles, which narrows the gap to RAW
without closing it.

---

## 29. Trading bytes for cycles: the bus has 4x the headroom the CPU has (session 7)

> **ALSO SUPERSEDED IN PART BY 38.** "The bus has 4x the headroom the CPU has"
> is about the SCSI pipe. The 68000's LOCAL bus is a different resource and the
> decoder occupies 86.7% of it, so trading cycles for bytes is not free in the
> currency that turned out to bind. 29.6's DMAC idea is costed in 39.
>
> **SUPERSEDED IN PART BY 30, which measured it.** The mode survives and the
> conclusion holds, but every number in this section moved: a span costs 43.7
> cycles + 9.152/pixel *only* in an encoder-assisted format (the obvious
> decoder is 97.9 + 10.46), spans beat V1 from runs of 4 blocks and not 2, and
> the re-priced trade-off is 52.0% median / 10 misses, not 43.0% / 8. Read 30's
> tables over 29.3's. 29.5's other three items are still open, and 29.6 stands.
>
> **STATUS AT THE TIME: DERIVED, NOT MEASURED.** No 68000 had executed a span
> decoder. The per-pixel figure it rests on *is* measured (FINDINGS 24 V1) but
> at full row width; the per-span overhead was hand-derived. FINDINGS 4 is why
> it was labelled and then tested rather than believed.

FINDINGS 28 leaves the project CPU-bound while the **bus sits 4x idle**: `sasi`
spends 110 KB/s of a 488 KB/s pipe. That asymmetry is exploitable, because the
codec was designed when bytes were the scarce thing and every one of its
decisions trades cycles to save them.

### 29.1 The decoder pays per changed PIXEL; the disk pays per BYTE
Per-pixel costs, all measured:

| what | cycles/pixel | source |
|---|---:|---|
| write-only floor (no source read) | 4.59 | FINDINGS 24 V3 |
| **row-linear copy from word-expanded RAM** | **9.08** | FINDINGS 24 V1 |
| block-order copy, same bytes | 12.98 | FINDINGS 24 V4 |
| V1 codebook block | 18.74 | FINDINGS 28.2 |
| RAW, byte literals unpacked to words | 25.03 | FINDINGS 28.2 |
| naive per-pixel byte expansion | 26.13 | FINDINGS 24 V2 |

Two structural facts fall out. **The 1024-byte stride costs 43%** — the same
bytes cost 12.98 cycles/px in 4x4 block order against 9.08 row-linear, because
the stride breaks the `movem.l` burst. And **unpacking bytes to words costs more
than the write itself**: 25.03 against 9.08.

So the two cheapest things a decoder can be handed are *word-expanded* pixels
in *row-linear runs* — and both cost bytes on disc, which is what we have.

### 29.2 Codebooks are a byte optimisation that now costs cycles
A word-expanded literal 4x4 block, `movem.l (a0)+,d0-d7` straight from the
stream buffer into GVRAM, derives to **~240 cycles** — cheaper than V1's
measured 299.9, and pixel-exact. V1 is dearer *because* it is compressed: it
pays an index decode and an indexed `movem.l` that a literal does not, and then
does exactly the same four writes. It buys 31 bytes and spends 60 cycles.

**Every codebook mode is CPU-dominated by a literal.** V4 was already dominated
by RAW (28.8); with word-expanded literals available, so is V1. The VQ codebook
earns its place only while bytes are scarce.

### 29.3 Row-linear literal spans, priced against the real mode maps
Replace the per-block escape with a per-row **span**: `(x, count, word-expanded
pixels)`, decoded with `movem.l` bursts. A run of L horizontally adjacent dirty
blocks becomes 4 spans of 4L pixels, deriving to `4 * (50 + 4L * 9.08)` cycles
against `300L` for V1 — **cheaper for any run of 2 blocks or more**, at 32 bytes
per block instead of 1.

Applied greedily (buy the best cycles-saved-per-byte until the bus budget is
gone) to the *unchanged* mode maps of the `sasi` Singe window:

| | today | + literal spans |
|---|---:|---:|
| median frame | 74.4% | **43.0%** |
| p90 frame | 115.1% | **83.6%** |
| worst frame | 136.2% | **106.2%** |
| frames missing the budget | **37/120** | **8/120** |
| bitrate | 101.7 KB/s | 453.2 KB/s (bus 488) |

And the fit is structural rather than lucky: **spans get cheaper exactly where
blocks get expensive.** A span amortises its overhead over a long run, and long
runs are what a high-change frame is made of. The frames that miss today are the
frames spans help most.

### 29.4 This reopens 28.5, which said a scene cut cannot fit
28.5 concluded that no mode assignment fits a 100%-changed frame at 12fps,
because the cheapest full redraw available — all-V1 — is 110.5%. That was true
of *the mode set the codec has*. Adding a byte-expensive, cycle-cheap mode
changes the arithmetic: mixing a fraction `x` of the frame as spans against V1
for the rest,

- CPU needs `x >= 0.19`
- the 40,977 B/frame bus budget allows `x <= 0.39`

**The interval is not empty.** A scene cut fits at 12fps if roughly a quarter to
a third of it arrives as word-expanded row-linear literals. 28.5's "structural
ceiling" was a ceiling of the bitstream, not of the machine.

### 29.5 What has to be measured before any of this is believed
1. **Span cost on the 68000.** The 50-cycle per-span overhead is derived, and
   the 9.08 cycles/px is measured at *full row width* with 12-register bursts —
   a short or oddly-aligned span cannot burst as well, so short spans are
   flattered here. Extend `tools/bench/blit.s` with a span variant and measure
   it against run length. **This is the load-bearing number.**
2. **Re-run the ring-buffer simulation at ~450 KB/s.** FINDINGS 21's zero
   required prefill was established at 110 and 280 KB/s against a 488 KB/s pipe.
   At 453 the margin is a tenth of what it was, and 21's own caveat was that the
   test is cumulative — it needs redoing, not extrapolating.
3. **Confirm the 4 Mbps figure**, which is user-supplied with no recorded
   provenance and which this design would run at 93% of. It has been a "would be
   nice" since session 1; a design that leans on it makes it load-bearing.
4. **Confirm DMA, not PIO** (STATUS priority 5). At 453 KB/s a PIO fallback puts
   the transfer cost on the CPU we are trying to relieve. Cheapest check
   available and now the most consequential.

### 29.6 The other lever, not yet costed: let the DMAC do the copy
The X68000 has an HD63450 DMAC (4 channels, `x68k.cpp:1046`). Channel 3 is
ADPCM — confirmed, `adpcm_drq_tick` asserts `drq3_w` — but memory-to-memory
transfer on a free channel would take the GVRAM copy off the CPU entirely,
leaving it only the parsing. This is the one idea here that could move the
budget without spending a single extra byte.

It cannot be settled in MAME: like the SCSI/SASI devices (BENCHMARK.md), the
HD63450 is a functional model, so a timing number out of it would measure the
emulator's scheduler. It needs hand-derivation against the datasheet plus real
hardware — the same three-tier approach the disk benchmark already documents.

## 30. The span, measured: the mode survives, and it is an encoder format (session 8)

FINDINGS 29 priced a new decoder mode at `4 * (50 + 4L*9.08)` cycles and marked
the whole section DERIVED. This is the measurement. `tools/bench/blit.s` gained
two span variants, `tools/bench/prep_spans.py` generates one stream per span
length, `tools/bench/span.lua` times them, and `tools/bench/span.sh` runs the
lot, and the whole thing takes about 25 seconds.

Same scope as every 68000 figure since FINDINGS 24: instruction cycles against
MAME's zero-wait-state GVRAM, interrupts masked. A **lower bound**, not a
prediction.

### 30.1 What was measured
Twelve `v5` configs and eleven `v6` configs, each cutting the **same** 256x192
frame into spans of a different length, so the work differs only in how finely
it is cut. Regressing `cycles = A*spans + B*pixels` over a set reads the
per-span overhead and the per-pixel cost straight off.

Every config draws the whole picture, the picture is cleared before each run and
snapshotted after, and all 23 snapshots are checked pixel-exact by
`tools/bench/verify_frame256.py`. A config cannot time fast by writing nothing.

| | per span | per pixel | fit error |
|---|---:|---:|---:|
| **v5** — decoder handed `(x, npix)`, works the copy out | **97.9** | **10.459** | ±1.4%, and only on spans that are a whole number of bursts |
| **v6** — encoder hands it an address and a jump | **43.7** | **9.152** | **±0.3% over all 11 lengths** |
| *29's assumption* | *50.0* | *9.080* | — |

**29's arithmetic was right about a format nobody had written yet.** v6 hits it
almost exactly; v5 — the obvious decoder, and the one 29 was describing — is
2.24x dearer per span and 14% dearer per pixel.

### 30.2 Why the difference is a format difference, not an optimisation
v5's record is `(x, npix)`, so the decoder computes the destination, divides
`npix` into 16-pixel bursts, and handles the 0..15 remainder: about 122 cycles
of arithmetic and branching per span before a single pixel moves. All of it is
known at encode time.

v6's record is `{u32 absolute GVRAM address, u16 jump displacement}` and nothing
else. The displacement jumps into an unrolled chain of eleven 24-pixel copy
units, so a span of any supported length is straight-line code with no loop, no
remainder, and no address arithmetic — `move.l (a0)+,a2` / `move.w (a0)+,d0` /
`jmp v6ch(pc,d0.w)`, then `movem.l` pairs. GVRAM is at $C00000 on every X68000,
so absolute destinations are a legitimate thing to bake into a stream.

Two consequences of that format, both cheap:
- **Span lengths are multiples of 24 pixels** and a run pads up to it. The
  padding costs bytes and its own pixels, nothing else, and it is *correct on
  screen*: a literal span carries true pixels of the current frame, so painting
  a clean neighbour is a no-op visually.
- **A span may overrun the visible 256 pixels of its row by up to 23.** Free:
  the line stride is 1024 bytes and only the first 512 are displayed, so the
  overrun lands in the invisible half of the line.

### 30.3 The remainder path is where a short span actually dies
v5's cost per span, measured, against its length:

| span | 4 px | 8 px | 12 px | 16 px | 20 px | 24 px | 32 px |
|---|---:|---:|---:|---:|---:|---:|---:|
| cycles/span | 180.3 | 240.9 | 296.3 | 261.8 | 347.7 | 401.9 | 430.7 |
| cycles/pixel | 45.08 | 30.11 | 25.46 | **16.36** | 17.65 | 17.27 | **13.46** |

A 12-pixel span costs *more* than a 16-pixel one. Everything below the 16-pixel
burst width goes through `move.l`/`move.w` at roughly 10 cycles a pixel plus the
per-span overhead, and 29's warning that "short spans are flattered" was
correct — but the fix is to pad them up to a burst, not to avoid them. v6 has no
remainder path at all, which is most of why its fit is linear to 0.3%.

### 30.4 Registers are the reason the per-pixel cost moved
FINDINGS 24's 9.08 cycles/pixel came from a fixed blit with 12 registers free
for `movem.l` and no live state. A span decoder keeps a stream pointer, a
destination and counters live, so v5 can spare only 8 registers per burst — 32
bytes instead of 48 — and pays 10.46 cycles/pixel for it. v6 gets back to 12
registers precisely because the encoder holds the state instead, and lands at
9.152. **The per-pixel figure is a function of how much the decoder has to
remember**, which is not something the FINDINGS 24 measurement could have shown.

Two smaller results, both cheap and both worth having on the record:
- **Odd-`x` alignment is free.** Spans starting at an odd pixel run their bursts
  at `addr mod 4 == 2` and cost 259.0 cycles/span against 261.8 aligned — inside
  the timing granularity. The 68000's 16-bit bus does not care, as expected;
  now it is measured rather than assumed.
- **A full-row span is 154 cycles per 4x4 block**, the floor this mode can
  reach, against V1's measured 299.9.

### 30.5 Re-pricing: the trade holds, and it is smaller
`tools/analysis/12_span_tradeoff.py` now runs on measured constants. Same greedy
(buy the best cycles-saved-per-byte until the bus budget is gone), same
unmodified mode maps, same Singe window:

| | today | 29 (derived) | **30 (measured)** |
|---|---:|---:|---:|
| `sasi` median frame | 74.4% | 43.0% | **52.0%** |
| `sasi` worst frame | 136.2% | 106.2% | **108.7%** |
| `sasi` frames missing | 37/120 | 8/120 | **10/120** |
| `sasi` bitrate | 101.7 KB/s | 453.2 | **448.0 KB/s** |
| `scsi` median frame | 94.9% | 69.4% | **74.6%** |
| `scsi` frames missing | 51/120 | 18/120 | **25/120** |

And the break-even moved. Cycles per 4x4 block in a run of L blocks, v6, with
each of the run's 4 spans padded to a whole 24-pixel unit:

| L | 1 | 2 | 4 | 8 | 16 | 64 |
|---|---:|---:|---:|---:|---:|---:|
| cycles/block | 1053 | 527 | **263** | 242 | 176 | 154 |

So a run beats all-V1 (299.9) **from L=4 up**, not from L=2 as 29.3 claimed, and
runs of 1-3 blocks all cost the same 1053 cycles because they pad to the same
single unit. A cost-aware mode decision should not offer a span below 4 blocks
at all.

### 30.6 29.4 survives: a scene cut still fits at 12fps
Mixing a fraction `x` of a 100%-changed frame as full-row spans against V1 for
the rest, on measured costs (154 cycles and 33.4 bytes per block):

- CPU needs `x >= 0.196`
- the 40,977 B/frame bus budget allows `x <= 0.373`

The interval is not empty — narrower than 29.4's 0.19..0.39, same conclusion.
FINDINGS 28.5's "a scene cut cannot fit" was a ceiling of the bitstream, not of
the machine, and that now rests on a measurement. `12_span_tradeoff.py` prints
this arithmetic and will say so if it ever stops being true.

### 30.7 What this does NOT settle
The three remaining items of 29.5 are unchanged and are now **more** load-bearing,
because the measured design runs at 448 KB/s of a 488 KB/s pipe rather than 453:
re-run the ring-buffer simulation at that rate, confirm the 4 Mbps figure's
provenance, and confirm DMA rather than PIO. A PIO fallback would put a 448 KB/s
transfer back on the CPU this mode exists to relieve.

Also unmeasured: **the parse cost of a span-heavy stream**. Every figure here
times the copy. The 68000 also has to read the mode map and dispatch: the
re-priced `sasi` stream buys 8773 spans across 120 frames, a mean of 73 a frame,
and each one's three-instruction dispatch is inside the fitted 43.7 — but the
mode-map walk that decides a span exists is not. `decode.s` does not implement
spans yet.

## 31. The mode decision can see cycles now, and it costs 0.26 dB (session 8)

FINDINGS 28 left the decoder missing 31% of frames at `sasi` and 42% at `scsi`
while the mode decision minimised `D + lam*R` — distortion against BYTES — on a
machine whose binding budget is CYCLES. This is the second controller.

`vq_hybrid.decide(ctx, lam, mu)` now minimises `D + lam*bytes + mu*cycles`, and
`ratectl.encode_rate_controlled(cycle_budget=...)` bisects `mu` per frame
against 833,333 cycles with the `lam` bisection nested inside it.
`tools/analysis/13_cpu_ratectl.py` measures what it costs.

### 31.1 The result
Worst sustained window, 120 frames, same targets, same quality floors:

| | PSNR | KB/s | CPU median | CPU max | frames missing |
|---|---:|---:|---:|---:|---:|
| `sasi` bytes only | 27.22 dB | 109.5 | 74.4% | 136.2% | **37/120** |
| `sasi` + cycle ceiling | **26.95 dB** | 109.4 | 81.5% | 110.6% | **1/120** |
| `scsi` bytes only | 29.90 dB | 280.0 | 94.9% | 146.6% | **51/120** |
| `scsi` + cycle ceiling | **29.27 dB** | 278.6 | 99.6% | 110.6% | **1/120** |

**36 of 37 misses at `sasi` for 0.26 dB, 50 of 51 at `scsi` for 0.62 dB.** The
bitrate does not move: the byte controller still binds, and mu changes *which*
modes are bought rather than how many bytes.

`sasi` pays less quality than `scsi` because it had less to give up: it was
already short of bytes, so the cycle-cheap directions it takes (V4 -> V1, and
blocks it can afford to hold) were near where the byte lagrangian already sat.
28.8 predicted the shape of this and got the sign right.

Mode mix, `sasi`, bytes-only -> with the ceiling: SKIP 46.4 -> 47.1%,
V1 19.8 -> 23.0%, **V4 25.2 -> 20.3%**, RAW 8.5 -> 9.6%. At `scsi` the V4
collapse is dramatic — **15.0 -> 5.3%**, with RAW taking it at 41.3 -> 43.2%,
which is 28.8's inversion happening in practice: RAW is dearer in bytes and
cheaper in cycles, so a byte-rich profile buys its way out of V4.

Only **46 of 120 frames need any mu at all** at `sasi`; the median frame is
decided at mu=0 and is unchanged from session 6.

### 31.2 The one frame that cannot fit is the intra frame, not a hard case
Both profiles miss exactly one frame, both at 110.6% — the all-V1 floor of
FINDINGS 28.5 — and in both it is **frame 0**. It has no previous
reconstruction, so every block must be coded, which is the definition of a
100%-changed frame. A scene cut mid-stream is the same thing.

That is the correct behaviour rather than a failure, and it is worth being
explicit about why: at `MU_CLIFF` a block only becomes SKIP if holding the
previous reconstruction costs less than ~28,665 units of distortion. A frame
with nothing on screen worth holding stays fully coded and is emitted **late on
purpose**, exactly as a frame that will not fit at `LAM_CLIFF` is emitted over
budget. Freezing a cut to make a deadline is the worse failure.

### 31.3 28.7 was too pessimistic, and the reason is instructive
28.7 estimated that only ~three quarters of the misses were the encoder's to
fix — 26 of 37 at `sasi` — because re-coding every non-SKIP block as V1 still
missed 11 frames. Measured, the controller fixes **36 of 37**.

The gap is that 28.7's floor held the SKIP set fixed and asked "how cheap can
the blocks we already decided to draw be?". The real decision can also **move a
block to SKIP**, paying distortion for it, and above ~90% non-SKIP that is the
only lever left. So 28.7's floor was a floor for a fixed SKIP set, not for the
mode decision. Two conclusions of 28.7 stand: the profiles are an I/O axis and
both must fit the same 10 MHz budget.

### 31.4 SKIP is not a constant, and the way out is two cost functions
A SKIP block costs 13.25 cycles when all four blocks sharing its header byte are
SKIP (one `tst.b` clears the group) and ~45 in a mixed byte, so its price
depends on its neighbours — which a per-block lagrangian cannot see. Picking one
number is a real trade: 45 overcharges clustered SKIPs and pushes the encoder
away from the mode that saves the most cycles, 13.25 undercharges isolated ones
and lets frames overrun.

The resolution is that **the budget check does not have to use the same cost
function as the mode decision**. `decide()` uses 13.25 purely to *rank* modes
within a block, where the choice only scales the incentive (the V1-SKIP gap
moves 12% between the two candidates). The controller scores whole frames with
`vq_hybrid.cycles()`, the exact clustered rule, validated to 1 point against the
68000 — so the bisection converges on what the machine will really do, whatever
the ranking constant was. That function is now defined once and imported by
`11_cpu_budget.py`, rather than living in two places that can drift apart.

### 31.5 Both controllers are gated against decoder drift
The mu controller varies the mode map frame to frame exactly as the lam
controller does, so it is exposed to the FINDINGS 26.1 failure — an encoder
reporting a reconstruction the decoder will never produce. `09_ratectl_drift.py`
now runs **both** configurations and both report 0/120 drifting frames, 0.00 dB
overstatement. The CPU ceiling is on by default in `encode.py`
(`--no-cpu-fit` restores session 7 behaviour).

### 31.6 With spans on top, the window fits completely
Re-running the span pricing of FINDINGS 30 against a cost-aware container —
lever B first, then lever A on what it leaves:

| `sasi` | bytes only | + cycle ceiling | + ceiling + spans |
|---|---:|---:|---:|
| median frame | 74.4% | 81.5% | **56.8%** |
| worst frame | 136.2% | 110.6% | **91.5%** |
| frames missing | 37/120 | 1/120 | **0/120** |
| bitrate | 101.7 KB/s | 101.6 | 449.3 KB/s |

The intra frame lands at 91.5% — spans are what make a full redraw fit, which is
30.6's arithmetic arriving in a real container. That row is still a **model** of
a bitstream nothing implements; the two levers have never run on the 68000
together, and the ring-buffer question of 30.7 gets sharper at 449 KB/s.

## 32. SASI is dropped, and the reason is capacity, not bandwidth (session 9)

**USER DECISION**: drop the `sasi` profile. A SASI volume on this machine is
limited to 40 MB, and the game does not fit in one.

That ends the two-quality-mode decision of session 2. `scsi` is now the only
profile, and `encode.py --profile` has one choice. The retired 110 KB/s rate
point is not deleted from the record, for the reason in 32.3.

### 32.1 How much video there actually is
Measured off the source Blu-ray rather than recalled: the unique scene footage
is streams `00000`-`00201`, **1366.6 s = 22.8 min**. The longer streams
(`00215` 1376 s, `00216` 1152 s, `00223` 566 s) are compilations of the same
material and are not additional content — 00223 is the window every codec
measurement in this project has been taken on. Total across all 224 streams is
88.3 min, which is the figure to *not* quote.

22.8 min agrees with the ~22 min of laserdisc footage the arcade original is
usually credited with, which is the cross-check that the compilations really
are duplicates.

At the rates this codec has actually produced, including the 7.8 KB/s audio
allowance:

| stream | rate | whole game |
|---|---:|---:|
| retired 110 KB/s profile | 109.4 KB/s | **146.0 MiB** |
| `scsi`, measured (FINDINGS 31) | 278.6 KB/s | **371.8 MiB** |
| `scsi` + spans (MODEL, 31.6) | 449.3 KB/s | **599.6 MiB** |

### 32.2 Where the 40 MB actually comes from
It is not a bus-addressing limit. MAME 0.277's `src/mame/sharp/x68k_hdc.cpp`
builds the SASI LBA from a 6-byte Group-0 CDB as
`(cmd[1] & 0x1f) << 16 | cmd[2] << 8 | cmd[3]` — **21 bits of 256-byte blocks,
so 512 MiB is addressable per unit**. `call_create` makes a 20 MB image
(`0x13c98` blocks) because that is what a period drive was.

So the 40 MB ceiling is a **Human68k / IPL volume-format and period-drive
limit**, not something the SASI command set imposes. That distinction does not
rescue the profile: four units at 40 MB is 160 MiB, and 146.0 MiB of video
would consume essentially the entire SASI address space of the machine at the
*lowest* rate this codec has ever produced, leaving nothing for Human68k, the
player, or the game's own data.

*Scope: the 21-bit CDB and the 256-byte block are read out of MAME's
implementation. The 40 MB volume figure is the user's, and is consistent with
Human68k's SASI partitioning; it has not been measured here.*

### 32.3 The rate point may come back, under a different name
Dropping SASI removes an interface, not a bitrate, and the two are on different
axes — the profile axis has been I/O bandwidth only since FINDINGS 28.7. The
awkward part is that **capacity and bandwidth now pull in opposite directions**:

- the only period medium with room for 371.8 MiB (let alone 599.6) is
  **CD-ROM** at 540-650 MB, and
- a **1x CD-ROM sustains ~150 KB/s**, which is *below* the surviving 280 KB/s
  profile and much nearer the rate that was just retired.

A SCSI hard disk has the bandwidth but has to be large for the era at 372 MiB.
**The user's call was to ship `scsi` as the only profile now and settle the
medium when the pipe is measured** — the blocked disk benchmark
(`docs/BENCHMARK.md`) and the DMA-vs-PIO check of FINDINGS 29.5.

**Correction to the framing above, found after that call was made.** The
medium is less open than this section first presented it. FINDINGS 21.2 already
committed the deployment target to **SD-backed SCSI (BlueSCSI / SCSI2SD)**, in
session 2, and that is the premise the whole 488 KB/s constant rests on. On SD
there is no capacity problem at any rate this codec produces — an SD card is
gigabytes — and no seek tail either. So:

- **Capacity does not choose between the survivors.** It killed SASI, whose
  40 MB ceiling is a Human68k volume-format limit that SD emulation does not
  lift, and it does not bind on SD-backed SCSI at all.
- **CD-ROM is the one that capacity rules out**, not in. With spans the stream
  is 487.1 KB/s = **650.1 MiB** for the whole game, past a CD's ~620 MiB
  usable — and 487 KB/s is more than 3x a 1x CD-ROM's ~150 KB/s. A CD-ROM
  delivery would mean giving up the span lever *and* re-deriving a profile
  around 150 KB/s.

So the open question is not "which medium" but the one FINDINGS 29.5/30.7
already had: **confirm the 488 KB/s figure's provenance, and confirm DMA**.
`profile_gen.py` exists precisely to re-derive a profile from a measured
bandwidth once there is one.

### 32.4 What MAME says about the SCSI path that survives
Read out of MAME 0.277 while settling 32.2, and directly relevant because the
medium decision is now the thing gating the profile:

**The CZ-6BS1's DMA is real and fully modelled.** `x68k_scsiext.cpp` wires the
MB89352's DREQ to the expansion slot and replaces the data register at
`$EA0015` with DMA-aware glue: on a DMA cycle (`m_slot->exown()`, driven by
`m_hd63450->own()`) a read goes to `spc->dma_r()` and #DTACK is negated until
DRQ asserts. `x68k.cpp:1114` closes the loop the other way
(`out_dtack_callback -> hd63450_device::dtack_w`). That is a genuine
DMAC-driven transfer with hardware flow control, on the **stock `x68000`
driver** — the one MAME marks working. This is the configuration FINDINGS 29.5
asked about, and the answer for this board is **DMA, not PIO**.

**The internal SCSI of the Super/XVI/030 is NOT modelled that way**, and it is
a trap. `x68k.cpp:1176` reads, verbatim, `// TODO: duplicate DMA glue from
CZ-6BS1`. So MAME's internal SCSI is PIO-only. A benchmark run on `x68ksupr`
would measure a PIO fallback the real machine does not have — on top of those
drivers already being MACHINE_NOT_WORKING (FINDINGS 28.7). **Benchmark
`x68000 -exp1 cz6bs1`, not `x68ksupr`.**

**CD-ROM is a first-class SCSI device on the internal bus** — `x68k.cpp:1168`
puts an `NSCSI_CDROM` at ID 6 by default — but the CZ-6BS1 card's own device
list offers `harddisk` only. So the CD-ROM delivery route of 32.3 is
emulatable, but not on the board whose DMA is modelled, without a source
change.

None of this is a transfer RATE. `docs/BENCHMARK.md`'s split still holds and is
worth restating because 32.3 defers a decision to a measurement: MAME can
settle whether the path works and whether it is DMA, and **cannot** settle
KB/s, because its device models are functional rather than transfer-timing
accurate. The rate half of the medium question needs derivation or real
hardware, not a longer MAME run.

## 33. The container carries its own alignment: DLX1 -> DLX2 (session 9)

The encoder gap left open since session 7 (FINDINGS 28.3, STATUS item 4) is
closed. `encode.py` now emits **DLX2**, which pads every frame record up to a
4-byte boundary — the first one included, by padding the codebook tables so
`off_frm` is aligned. `dlx.py` reads both versions; DLX1 containers stay
readable because every measurement in FINDINGS 28-31 was taken on one.

Measured on the same 120-frame window:

| | record starts not 4-aligned | padding cost |
|---|---:|---:|
| DLX1 (through session 8) | **94/120** | 0 (the loader added 180 B) |
| DLX2 (now) | **0/120** | 160 B = 1.33 B/frame = **16 B/s** |

16 B/s against 278.6 KB/s is 0.006% of the stream. The thing it buys is not
speed: an odd `move.l (a0)+` on a 68000 is an **address error**, which vectors
into the IPL and presents as an infinite loop, not as a slow read. That is the
bug that cost session 7 an afternoon.

`tools/bench/prep_dlx.py` still realigns at load time and now says whether it
had to — `0/120 record starts unaligned -- the container carries its own
padding` on a DLX2 input. It is kept rather than deleted because it is what
makes the session 7-8 containers decodable, and those are the containers the
published timings belong to.

**Cross-check that this changed nothing else:** re-encoding the `scsi` window
with the DLX2 writer reproduces FINDINGS 31.1 exactly — 29.27 dB, 278.6 KB/s,
median 99.6% / max 110.6% of a 12fps frame, 1/120 frames missing. The padding
is additive; it does not touch the mode decision.

## 34. The cost model, checked against the machine on a cost-aware container (session 9)

STATUS item 1. Everything in FINDINGS 31 was the validated cost MODEL
(`vq_hybrid.cycles`) applied to a container it had never been checked against —
the 1-point validation of 28.2 belongs to the *session 7* stream. This is the
cost-aware container timed on the emulated 68000, same harness, same scope
(instruction cycles, zero-wait-state GVRAM, interrupts masked; a LOWER BOUND).

| anchor | non-SKIP | model | measured | error |
|---|---:|---:|---:|---:|
| min non-SKIP | 15.4% | 254,683 cyc / 30.6% | 262,751 / 31.5% | **-3.07%** |
| median | 53.2% | 681,199 / 81.7% | 690,251 / 82.8% | **-1.31%** |
| p90 | 75.7% | 832,116 / 99.9% | 834,213 / 100.1% | **-0.25%** |
| max non-SKIP | 100.0% | 921,293 / 110.6% | 921,187 / 110.5% | **+0.01%** |
| whole 120-frame mean | — | 649,089 / 77.9% | 657,081 / 78.8% | **-1.22%** |

The model holds, and its error is **signed**: it under-predicts by 1-3% on light
frames and converges to exact on heavy ones. That is the right direction to be
wrong in for a ceiling controller — the bisection is tightest where the model is
most accurate — but it means the median frame is ~1 point dearer than FINDINGS
31 reports, not cheaper.

The four synthetic single-mode frames reproduce session 7 exactly: all-V1
110.5%, all-V4 165.2%, all-RAW 147.6%, all-SKIP 4.9%. Those are properties of
`decode.s`, not of the container, so agreeing across two different streams is
the cross-check that the harness is measuring what it claims.

### 34.1 The 23-minute "hang" was the buffering trap again
The session-8 note said this run "was still going at 12 minutes of CPU". It was
re-run here and sat at 99.9% CPU for **23 minutes** with a 0-byte log, then was
killed. Re-launched under **`stdbuf -oL`** with `-seconds_to_run 60`, the
identical plan completed in about **25 seconds of wall time** and printed every
line as it went — MAME reports `Average speed: 528.72% (52 seconds)`, so the
whole plan needs ~52 emulated seconds and the machine runs it at 5x realtime.

The lesson is the one already in STATUS, one level deeper: it is not enough to
write MAME's output to a file instead of a pipe. **A file is block-buffered too**,
so a long MAME run is unobservable until it exits, and an unobservable run that
is merely finishing looks exactly like one that is wedged. Session 8 lost the
measurement to that, and session 9 lost 23 minutes to it before spending 25
seconds getting the answer. **`stdbuf -oL` on every MAME job that prints
progress.**

## 35. The CPU budget has never had the disk in it (session 9)

> **TESTED BY 38 AND IT STANDS.** Session 10 first argued that the flat
> subtraction here is too pessimistic -- that the disk DMA could hide in bus
> cycles the CPU was not using -- and scored the same window at 53/120 instead
> of 84/120. **That was wrong.** A 68000 has no cache and a two-word prefetch
> queue, so it stalls as soon as another master takes the bus; DMA time is
> additive, which is exactly what this section assumed. The 84/120 stands and
> 38.3 now reproduces it.

**Raised by the user: "PIO is such a CPU killer. DMA is not. I'm concerned about
us drawing the wrong conclusions."** The concern is correct, and it is larger
than the labelling question of 32.4. This is the seventh false premise this
project has caught, and the most expensive one.

Every CPU figure in FINDINGS 24 through 34 is measured against **833,333 cycles
per frame**, the full 10 MHz clock divided by 12 fps. Nothing has ever been
subtracted from it for moving the bitstream off the disk. The decoder has been
scored as though the data arrives for free.

### 35.1 What the transfer actually costs
`profile_gen.py` has carried `DMA_CLOCKS_PER_WORD = 8` since session 2 (FINDINGS
5, an **ESTIMATE** from HD63450 timing, never measured) and prints a "DMA steal"
line — but that line was only ever compared against the 38.3% *blit* figure of
FINDINGS 17, which FINDINGS 24 superseded and which was never the decoder cost.
It was never debited from the decoder budget.

At the rates that matter, on a 10 MHz 68000:

| stream | DMA @ 8 clk/word | PIO, unrolled (~12 clk/B) | PIO, byte loop (~20 clk/B) |
|---|---:|---:|---:|
| `scsi`, 278.6 KB/s | **11.4%** | 34.2% | 57.1% |
| `scsi` + spans, 487.1 KB/s | **20.0%** | 59.9% | **99.8%** |

The PIO columns are hand-derived floors, not measurements: a byte from an I/O
register plus a store is 16 cycles on a 68000 before any loop overhead. They are
here to size the risk, and the size of the risk is that **PIO at the span rate
consumes the entire machine**.

### 35.2 What that does to the conclusions of FINDINGS 31
Debiting the DMA steal — the *cheap* case, the one we are hoping for:

| | KB/s | steal | budget left | median | p90 | worst | fits? |
|---|---:|---:|---:|---:|---:|---:|:--|
| `scsi` today | 278.6 | 11.4% | 738,238 | **112.4%** | 112.9% | 124.8% | **no** |
| `scsi` + spans | 487.1 | 20.0% | 667,070 | **98.3%** | 102.8% | 114.3% | **no** |

FINDINGS 31's headline — "1 frame of 120 misses" — is measured against a budget
with no I/O in it. With DMA debited the surviving profile does not fit at all:
the *median* frame is over. And 31.6's "with spans the window fits completely"
becomes a worst frame of 114.3%, because **the span lever buys cycles by
spending bandwidth, and the bandwidth comes back out of the CPU as steal.**
Spans still help — 112.4% -> 98.3% at the median, 14 points — but they no longer
close the gap on their own.

### 35.3 Why this is not settled by the DMA finding of 32.4
32.4 established that the CZ-6BS1's DMA *path* exists and is modelled. Three
things it does not establish, and all three are load-bearing:

1. **DMA vs PIO is a property of OUR player, not of the board.** The hardware
   supports DMA; if the player reads through IOCS and IOCS does PIO, we get PIO
   and the table above. `docs/BENCHMARK.md` item 4 already proposed driving the
   MB89352 registers directly for exactly this reason — that is now not an
   optimisation but the difference between fitting and not.
2. **8 clocks per word has never been measured.** It is now the single most
   load-bearing unmeasured number in the project: at 8 the port is marginal, at
   12 it is dead, at 4 it is comfortable. It comes from a datasheet reading in
   session 2 and nothing has checked it since.
3. **MAME cannot settle it.** Its device models are functional, not
   transfer-timing accurate (BENCHMARK.md), and it models no GVRAM wait states
   either — so a MAME run can confirm the transfer is a DMA cycle and cannot
   price it. This needs derivation from the HD63450 and MB89352 datasheets, or
   real hardware.

### 35.4 What this does and does not overturn
It does **not** overturn the decoder measurements: 300/448/400 cycles per block
and the model validation of FINDINGS 34 are properties of `decode.s` and stand
unchanged. What it overturns is every statement of the form "N frames of 120
miss the budget", because the budget was wrong. Those all need re-running
against `833,333 * (1 - steal)` once `steal` is a measurement rather than a
datasheet estimate.

It also sharpens the framerate question of STATUS item 5 considerably. At 10 fps
the budget is 1,000,000 cycles and the same DMA steal is proportionally smaller
per frame, which is now a much stronger argument for 10 fps than "one late frame
per cut" ever was.

### 35.5 `11_cpu_budget.py` now debits it, and 10 fps absorbs it
The tool takes `--io dma|pio|none` (default **dma**) and prints the budget it is
actually scoring against. On `tmp/rc_fr_singe_scsi_cpufit.dlx`:

| `--io` | budget left | median | worst | frames missing |
|---|---:|---:|---:|---:|
| `none` — the pre-session-9 premise | 833,333 | 99.6% | 110.6% | **1/120** |
| `dma` (8 clk/word, estimated) | 738,234 | 112.4% | 124.8% | **84/120** |
| `pio` (12 clk/B, floor) | 548,036 | 151.4% | 168.1% | **120/120** |

`--io none` prints a warning naming FINDINGS 35, so the old number cannot be
produced by accident.

**At 10 fps and DMA the same container goes back to 1/120** — median 93.7%,
worst 104.0%. That is conservative, because it holds the 12 fps byte rate: a
real 10 fps encode carries ~17% fewer bytes per second, so the steal falls too.

This changes what the framerate decision (STATUS item 5) is *for*. It was a
quality question about one late frame per scene cut. It is now the lever that
pays for the disk, and on current estimates it is the difference between a
stream that fits and one that misses 70% of its frames.

## 36. A `scsi` window does not fit in the machine the test rig emulates (session 9)

Swapping the decoder gate onto the surviving profile's container made it fail —
`frame 119 not pixel-exact: 49,005 px differ`. That is not a decoder bug and not
the DLX2 change. **The container does not fit in RAM.**

`tools/bench/decode.lua` loads the entire stream into emulated memory at
`STREAM = 0x30000`, and the locked target is a stock **2 MB** machine:

| container | stream | ends at | verdict |
|---|---:|---:|---|
| session 7-8 `sasi` | 1,108,888 B | 0x13EB98 = 1.25 MB | fits |
| `scsi` cost-aware | 2,840,860 B | 0x2E591C = 2.90 MB | **overruns 0x200000 by 940 KB** |

The loader wrote 940 KB past the top of memory, the decoder then parsed whatever
that reads back as, and the run neither completed its sequential pass nor drew
the right picture. Every 68000 decode verification before session 9 was done on
a container small enough to fit by accident — the `sasi` profile was a third the
bitrate, so nobody met this.

**This is a property of the test rig, not of the player.** The shipping player
streams from disk into a ring buffer and holds seconds of video, not minutes.
But it does bound what the rig can prove: at 278.6 KB/s, a 2 MB machine holds
about **6.7 seconds** of stream, so the strongest test in the tree can only ever
audit a prefix of a window.

The fix keeps the test honest rather than making it pass:
- `prep_dlx.py` truncates the frame list to what fits, **prints that it did**,
  and takes `--ram` / `--all-frames`. On the `scsi` window it keeps **80 of
  120** frames.
- `verify_decode.py` takes `--nframes` so the reference decoder replays exactly
  the prefix the 68000 decoded, instead of running 40 frames ahead of it.
- `check.sh` reads the count back out of `decode_meta.lua` and passes it through,
  and now **fails loudly if the sequential pass did not complete** — the missing
  `snapshot taken` marker — instead of reporting a pixel diff against a
  half-drawn screen. That guard is what turned this from a mystery into a
  five-minute diagnosis.

Verifying a prefix is still a real test: SKIP blocks make every frame a claim
about the one before it, so frame 79 is only correct if all 80 were. What is
lost is coverage of the last 40 frames, and the honest way to get it back is to
gate on more than one window rather than to pretend one pass covers everything.

**The timing confirms the diagnosis.** Truncated to 80 frames the pass completes
in **8 emulated seconds** and the frame is pixel-exact; the model predicts
~6.6 s for 80 frames at this container's cost, so that is the expected number.
The 120-frame run that overran RAM could not finish the same work in **44**.
A decoder reading garbage does not run slowly for an interesting reason — it was
parsing lengths out of unmapped memory and walking wherever they pointed. Any
"the decoder is 4x slower than the model on RAW-heavy streams" conclusion drawn
from that run would have been entirely false, which is the third time in this
session that an unobservable run nearly produced a wrong finding.

## 37. A second emulator, and MAME is not running the core we thought (session 10)

Every 68000 cycle figure in FINDINGS 24-35 came from one instrument. This is a
second one, run against byte-for-byte the same `decode.bin` and the same
container.

`tools/bench/c68k/` links **px68k's C68K core** into a headless harness: a
hand-built X68000 memory map, no SDL, no ROMs, no emulated machine. The decoder
touches nothing but RAM, the control block and GVRAM, so the machine around it
was never part of the measurement.

### 37.1 What the two instruments actually are
**MAME 0.277's `M68000` is not Musashi.** `src/devices/cpu/m68000/m68000.lst`
plus `m68000gen.py`: it is the microcode core, where timing emerges from the
modelled micro-sequence and 4-clock bus cycles. C68K is a static per-instruction
cycle table (`ORI_CLOCKS_*` / `EA_CLOCKS_*` in `c68kmacro.h`), hand-transcribed
from the Motorola manual by a different author.

Those are two different ways of arriving at a number, which is what makes the
agreement worth something. It would be worth much less if both were tables.

### 37.2 The harness is self-validating
It decodes all 80 frames and dumps the screen; `verify_c68k.py` checks it
against `tools/encoder/dlx.py` **pixel for pixel, on palette indices**. That is
the licence for the cycle numbers: the harness rebuilds px68k's memory model
from scratch -- byte-swapped RAM (`mem_wrap.c:420`), GVRAM word writes that
discard the high byte -- and any of it being subtly wrong would still print
plausible cycles. It could not print a pixel-exact 80-frame temporal recursion.

It does. **`decode.s` is now pixel-exact under two independent CPU cores.**

### 37.3 The numbers
```
anchor                      MAME      C68K    delta      MAME   C68K  of a 12fps frame
min non-SKIP  42.8%       600982    620760   +3.29%     72.1%  74.5%
median        65.2%       841038    869036   +3.33%    100.9% 104.3%
p90           72.9%       836124    856872   +2.48%    100.3% 102.8%
max non-SKIP  100.0%      921187    923090   +0.21%    110.5% 110.8%
synthetic all-SKIP         40729     40946   +0.53%      4.9%   4.9%
synthetic all-V1          921187    923090   +0.21%    110.5% 110.8%
synthetic all-V4         1376881   1420754   +3.19%    165.2% 170.5%
synthetic all-RAW             --   1273298                 -- 152.8%
```

The `all-RAW` cell is empty because MAME's timed pass did not reach it. That is
an operational fact worth recording: with `-video soft -nothrottle` this box runs
`x68000` at about **0.033x realtime**, so `decode.lua`'s eight anchors plus two
full passes — ~48 emulated seconds — cost ~25 minutes of wall clock, and two runs
were killed by their own `timeout`. The C68K harness does the same work in
seconds because it emulates a CPU and not a machine. **Anchor MAME runs by wall
clock, not by `-seconds_to_run`.**

**Cycle-table error is bounded at 3.3%, and it runs against us** -- C68K reads
high on every anchor. Nothing here rescues FINDINGS 35. The disagreement is
mode-dependent (all-V1 +0.21%, all-V4 +3.19%), so it localises to the V4 path's
indexed two-register `movem.l`, not to a systematic clock difference.

**FINDINGS 28.8 is confirmed independently**: under C68K, V4 (170.5%) still
costs more than RAW (152.8%). That conclusion inverts the encoder's mode
preference, so having it from a second core matters more than most.

### 37.4 What it does not settle
px68k has no bus-timing model anywhere in `x68k/*.c` -- grep it. Neither
instrument charges GVRAM wait states, so this is **the same lower bound,
measured twice**. It bounds cycle-table error. It says nothing about the
distance to a real X68000; that is still BENCHMARK.md Tier 3.

### 37.5 One trap, recorded because it will catch the next person
C68K is 64-bit-unsafe by construction: its `MOVEM` macros do
`src = (UINT32)(&D0)` -- they truncate the host address of the register file and
dereference it -- and `C68k_Set_Fetch` keeps the opcode-fetch base in a `UINT32`.
Under the default PIE the binary loads near `0x555555550000` and the first
`movem` segfaults. The Makefile builds `-no-pie` and the harness mmaps its arena
`MAP_32BIT`. Both are load-bearing, not tidiness.

## 38. The bus, measured: the project is bus-bound, not CPU-bound (session 10)

> **This supersedes part of 29 and part of 35.** FINDINGS 29's "the bus has 4x
> the headroom the CPU has" is true of the SCSI pipe and false of the 68000's
> local bus, and they are different resources. FINDINGS 35's flat CPU debit for
> the disk charges the CPU for bus cycles it was not going to use.

Everything since FINDINGS 24 has been costed in CPU clocks. The 68000 has
another budget nobody had counted: its **memory bus**, one 4-clock cycle at a
time, carrying instruction prefetch as well as data.

### 38.1 Two sources that check each other
`tools/bench/c68k/c68k_bench` counts every Read/Write callback the C68K core
makes -- exact, because C68K splits a long access into two word calls, which is
what the 16-bit bus does. It cannot count **instruction prefetch**: C68K reads
opcodes straight through a host pointer with no callback, and MAME exposes no
fetch count either.

So `tools/analysis/15_bus_occupancy.py` derives prefetch by walking
`decode.s`'s straight-line paths in `tools/bench/decode.lst` and multiplying by
each frame's mode histogram. The same walk also predicts the data half -- and
that half is measurable:

```
  measured mean     66,700 data bus cycles/frame
  derived  mean     66,672                        error -0.04% mean, 0.06% worst
```

The walk reproduces the measurement, so its prefetch figure stands on the same
footing. `15_bus_occupancy.py` exits non-zero if that check ever stops holding.

### 38.2 The result
```
                              mean      median   worst frame
bus slots in a frame       201,497     211,013       230,772
  data accesses             66,672      68,044       105,216
  instruction prefetch     108,002     110,982       122,910
  total bus cycles         174,674     181,998       193,248
bus OCCUPANCY                86.7%       86.8%         88.3%
slots left for a DMAC       26,823      26,618        21,115
```

**The decoder occupies 86.7% of its own bus, and prefetch is 62% of that.** A
data-only count understates occupancy by about 2x, which is exactly the mistake
an instrumented emulator would lead you into.

Per mode, bus clocks against measured clocks: V1 204/299.9 (68%), V4 308/448.2
(69%), RAW 316/400.4 (79%), and the v6 span **9.0/9.152 (98%)**.

### 38.3 What that does to the frame budget -- and one wrong turn
The first thing done with 86.7% was to argue that FINDINGS 35's flat CPU debit
for the disk is too pessimistic: the decoder leaves ~26,800 bus slots a frame
idle against the disk's ~23,000, so score it as contention,
`frame = max(CPU clocks, 4 x bus cycles)`, and the window misses 53/120 rather
than 84/120.

**That is wrong, and the MC68450 manual is what says so.** A 68000 relinquishes
the bus on BGACK and cannot execute without it -- no cache, a two-word prefetch
queue that empties immediately. Worse, the DMAC does not interleave at operand
granularity by default: limited-rate auto-request hands it the bus in *bursts*
of `2(BT+4)` clocks out of a sample period of `2(BT+BR+5)`, taking
`2^-(BR+1)` of the bandwidth in slabs (MC68450 sect 5.2.3.2, Fig 5-2). During a
slab the CPU is stopped.

So **DMA time is additive to CPU time**, which is what FINDINGS 35 assumed all
along. `14_dmac_chain.py` reproduces its 84/120 exactly in the `today` column.

What 86.7% *does* say is worse than the thing it appeared to rescue: **there is
almost no room to overlap anything.** The 13.3% of bus slots the decoder leaves
idle are single gaps inside a `movem`-heavy loop, not windows a bus master can
be handed. Any design whose case rests on DMA hiding under CPU work on this
machine should be assumed dead until measured on hardware.

The measurement still earns its place: it is what prices the span painter
against a DMAC in 39, and it is the reason the answer there came out the way it
did.

### 38.4 What is not counted
Bus arbitration. The 68000's BR/BG/BGACK handover costs cycles a cycle-steal
DMA cannot avoid, and the disk debit here embeds it only insofar as FINDINGS 5's
8 clocks/word already does. Also: no GVRAM wait states, as everywhere since 24.
Both make the real occupancy **higher** than 86.7%, not lower.

## 39. The DMAC chain against the span: the datasheet says no (session 10)

FINDINGS 29.6 named "let the DMAC do the copy" the one lever that could move the
budget without spending a byte, and left it uncosted. This costs it, and the
answer is **no** -- but only after the constants came from the MC68450 manual
rather than from bus arithmetic, which is the whole lesson of the section.

### 39.1 They are the same container
v6's record is `{u32 absolute GVRAM address, u16 jump displacement}` = 6 bytes.
An MC68450/HD63450 **array-chaining entry** is `{u32 memory address, u16
transfer count}` = 6 bytes. Set the channel dual-address, direction
device->memory, Sequence Control counting both addresses up: MAR reloads per
entry (the GVRAM destination), DAR walks the stream buffer, MTC is the span's
word count. **The chain array IS the span table.** Every byte figure in
FINDINGS 30 carries over, and this is not a fork in the format -- the encoder
emits the same thing either way, only the executor changes. That much is real
and survives everything below.

### 39.2 The first answer was wrong by a clock
Session 10 first derived the DMAC's cost from bus arithmetic: moving a pixel is
a read cycle plus a write cycle, 2 bus cycles, 8 clocks, against v6's measured
9.152 -- a 12.6% edge. On that basis the design scored 1/120 frames over budget
against v6's 10/120 and looked decisive.

The datasheet does not agree. **MC68450 Fig 4-25 sheet 4**, dual address /
operand size WORD / device size 16 bits, D->M or M->D:
`{WORD READ, WORD WRITE}` = **9 CLOCKS**. Confirmed by the long-operand row, two
of each for 18. And **Fig 4-25 note 2** says why: the DMAC's reads take four
clocks and its **writes take five**. The 68000 writes in four.

| per pixel | clocks | source |
|---|---:|---|
| DMAC, dual-address word, two 16-bit ports | **9.000** | MC68450 Fig 4-25 sheet 4 |
| v6 `movem` chain | **9.152** | MEASURED, FINDINGS 30 |

**1.7%.** One clock on every DMAC write is the entire difference between a
12.6% win and a rounding error. Per span, sequential array chaining costs
**36 clocks** (Fig 4-25 sheet 1: three word reads for the 6-byte entry, plus
reload) against v6's measured 43.7 -- the DMAC's one genuine edge, and it is
7.7 clocks.

### 39.3 Scored additively, as 38.3 requires
```
                                today        v6 span   v6 fine tail     DMAC chain
  bitrate KB/s                  270.8          479.2          479.9          479.9
  frame, median                108.1%          99.3%          96.5%          95.0%
  frame, worst                 114.7%         112.0%         111.4%         110.3%
  frames missing               84/120         55/120         18/120         12/120
  blocks spanned/frame              0            727            839            845
```
`today` reproduces FINDINGS 35's 84/120 exactly, which is the check that the
scenario lines up.

### 39.4 What the DMAC actually buys, and who else can sell it
`v6 fine tail` is the decomposition. v6 pads every span up to 24 pixels because
its copy is an unrolled chain of 12-register `movem` units; adding a second,
finer chain of 2-register units caps the padding at 3 pixels instead of 23, for
the price of some more unrolled code and **nothing per span**. Priced
conservatively (a 4-pixel unit costs 56 clocks against a full unit's 220 for 24,
so it is dearer per pixel and paid at most once a span):

| | frames over |
|---|---:|
| v6 as built | 55/120 |
| **v6 with a finer chain tail -- software only** | **18/120** |
| DMAC chain | 12/120 |

**86% of the DMAC's advantage over v6 is the 24-pixel padding quantum**, and
that is a property of v6's unrolled chain, not of the CPU. The residual is 1.7%
a pixel and 7.7 clocks a span, worth 6 frames of 120.

Break-even against all-V1 moves the same way: v6 as built needs a run of 4
blocks, v6 with the finer tail needs 3, the DMAC needs 1.

### 39.5 The verdict
**Fix the quantum in software.** Six frames of 120 does not buy a reserved DMAC
channel, a two-region container layout, and a dependency on transfer timing that
cannot be verified in either emulator on this box. The `v6 fine tail` figure is
itself DERIVED and should be measured with `span.sh` before it is believed --
that is a day's work in a tool that already exists, against a hardware
dependency that needs an actual X68000.

Keep 39.1 on the record. If a later measurement moves the DMAC's per-pixel cost
below 8 clocks -- for instance if GVRAM tolerates a four-clock DMAC write in a
way the datasheet's typical-system assumption does not model -- the container
does not have to change to take advantage of it.

### 39.6 What else would have to be true, if it is ever revisited
- **A free channel.** Four exist; channel 3 is ADPCM (`adpcm_drq_tick` asserts
  `drq3_w`) and the SCSI stream needs one.
- **Two regions per frame.** Chaining fetches entries from an array while DAR
  walks the pixel data, so the span table and the literal words cannot be
  interleaved as v6 interleaves them.
- **The mode-map walk stays on the CPU.** 39.3 charges it; FINDINGS 30.7 flagged
  that 12_span_tradeoff.py did not.

### 39.7 A number the datasheet settled on the way past
FINDINGS 5's **8 clocks/word** for the SCSI DMA has been an unsourced estimate
since session 1 and STATUS has called it the most load-bearing unmeasured number
in the project. Fig 4-25 sheet 3 gives single-address `W/B READ` 4 clocks and
`W/B WRITE` 5; a device->memory disk transfer is one memory write. So it is
**5 clocks/word if the DMAC holds the bus** and about **12 if it arbitrates per
word** (front-end 5 best case / 8 worst, sect 4.5.2.1; back-end 2, sect 4.5.2.2).
The feature list's "up to 5 Megabytes per Second at 10 MHz, no wait states"
is the held-bus case: 2 bytes per 4-clock cycle.

**8 is the midpoint of a bracket the datasheet supports, not a guess.** Which
end applies depends on how the MB89352 drives REQ and whether cycle-steal-with-
hold is used, which is a design decision the player has not made yet -- and it
is worth 7 clocks a word on a 480 KB/s stream, so it is worth making
deliberately.

---

## 40. The finer chain tail, measured: v7 (session 11)

FINDINGS 39.4 attributed **86% of the DMAC array-chain's advantage over v6** to
one thing that is not a property of the DMAC at all -- v6's 24-pixel padding
quantum -- and derived that fixing it in software would take the `scsi` window
from 55/120 frames over budget to 18/120. It labelled that figure DERIVED and
said it should not be believed until `span.sh` measured it. This measures it.

### 40.1 The result
`tools/bench/blit.s` gains **v7**: v6's 24-pixel coarse chain with a second,
finer chain appended. Measured over thirteen span lengths by
`tools/bench/span.sh`, every one of which drew a **pixel-exact** frame:

```
cycles = 66.0 per span + 9.143 per COARSE pixel + 9.978 per FINE pixel
```

fitting all 13 lengths to within **0.2%** -- and the fit is not flattered by its
own configs, because the three-term model was identified on span lengths chosen
so that every fine remainder a real span can have (0, 4, 8, 12, 16, 20) appears.
v5 and v6 re-measure to 97.9 + 10.459 and 43.7 + 9.152, reproducing FINDINGS 30
exactly, so the harness has not drifted underneath the new variant.

| clocks per 4x4 block, run of L blocks | L=1 | L=2 | L=3 | L=4 | L=8 | L=64 |
|---|---:|---:|---:|---:|---:|---:|
| v6 as built | 1053 | 527 | 351 | 263 | 241 | 154 |
| **v7** | **424** | **292** | **248** | **226** | **183** | **151** |
| DMAC chain (datasheet) | 288 | 216 | 192 | 180 | 162 | 146 |

**Break-even against all-V1 (299.9) moves from L=4 to L=2 blocks.** 39.4
predicted L=3; the measurement is better than the derivation.

### 40.2 The scoring, and a derivation that was right for the wrong reasons
Rescoring the same `scsi` window with `14_dmac_chain.py`, the same additive
model, the same mode maps:

| | frames over budget |
|---|---:|
| today | 84/120 |
| v6 span as built | 55/120 |
| **v7, MEASURED** | **18/120** |
| DMAC chain (datasheet) | 12/120 |

**18/120, exactly the derived figure.** That agreement is a coincidence of two
cancelling errors, and it is worth writing down because a match this clean would
otherwise be read as confirmation:

- 39.4 assumed a **2-register `movem` tail**, derived at 56 clocks per 4 pixels
  = 14.0 clocks/pixel. The real tail costs **9.978** -- 29% cheaper.
- 39.4 assumed the second entry point costs **nothing per span**. It costs
  **22.3 clocks** (66.0 against v6's 43.7), because it is a second
  `move.w (a0)+,d0` and a second `jmp`.

The per-pixel win and the per-span loss are within a frame of each other over
this window. **The conclusion survives; the reasoning behind it did not.**

### 40.3 The instruction the derivation should have picked
A 2-register `movem` is the obvious "smaller unit of the same thing", and it is
the wrong instruction. Per 4 pixels:

| tail unit | bus cycles | clocks | per pixel |
|---|---:|---:|---:|
| `movem.l (a0)+,d0-d1` + `movem.l d0-d1,(a2)` + `lea` | 14 | 56 | 14.0 |
| **2 x `move.l (a0)+,(a2)+`** | **10** | **40** | **~10.0** |

`movem` pays two instruction words and a `lea` to move what two of the plainest
instructions on the machine move with post-increment on both sides. v7's fine
unit is therefore **one `move.l (a0)+,(a2)+` = 2 pixels**, which also makes the
padding quantum **2** rather than 4 -- and a span is a run of 4x4 blocks, so its
length is always a multiple of 4 and **the padding is exactly zero**. 39.4's
"caps the padding at 3 pixels" was pessimistic by three pixels.

The derived bus model predicts the measurement well once the right instruction
is in it: 5 bus cycles = 20 clocks per 2 pixels = 10.0/pixel against 9.978
measured, and 54 bus cycles = 216 clocks per 24 against 9.143*24 = 219.4.

### 40.4 Where the fine displacement lives, and why it is not in the record
Two chains need two entry points, and the second one has to survive the coarse
copy. Holding it in a register would cost a payload register -- v6's whole
reason for a 24-pixel unit is that it has exactly 12 free (`d0-d6/a1/a3-a6`).

So it is not in the span record. **It is in the stream**, after the coarse
pixels and before the fine ones. The coarse chain falls out into
`move.w (a0)+,d0 / jmp v7fh(pc,d0.w)`, and at that instant `d0` is dead payload
and `a0` is pointing exactly at it. The decoder holds nothing extra across the
copy and keeps all 12 registers.

The record is still `{u32 absolute GVRAM address, u16 coarse displacement}`;
the container costs **2 more bytes per span**, which `14_dmac_chain.py` charges.

### 40.5 The verdict, now measured rather than argued
**FINDINGS 39.5 stands: fix the quantum in software, drop the DMAC.** v7 takes
back **37 of the 43 frames** the DMAC chain would, using an instruction sequence
that needs no reserved channel, no two-region container, and no transfer timing
that neither emulator on this box can verify. 39.1 still holds if that ever
changes: the chain array and the span table are the same six bytes.

### 40.6 The 13-minute run that measured nothing
`span.sh` ran for 13 minutes producing an empty log and zero snapshots, and the
same MAME command with a shorter `-seconds_to_run` completed the identical work
in 30 seconds. The cause is still not identified. What matters is that **the
run was unobservable in both directions**: MAME's stdout did not reach the log
until exit even under `stdbuf -oL`, and the snapshots -- the one artefact that
would have shown progress -- may themselves only land at exit.

So the bisection that resolved it did not chase the hang. It **shrank the
stimulus** instead: `tmp/spans_meta.lua` carries byte offsets into a blob that
`prep_spans.py` writes once, so deleting config lines from the metadata runs any
subset in seconds against the same unmodified stream file. v5 alone, v7 alone
and the full set at a shorter run all completed; the wedge never reproduced.

This is the fourth instance of the pattern FINDINGS 34.1 named, and it is the
first where **the instrument was unobservable but the thing being measured was
fine**. `span.sh` now runs at `-seconds_to_run 200`, measured at 30 s wall for
all 36 configs, and asserts the snapshot count against the number of configs in
the generated metadata rather than a literal 23 -- so adding a config can no
longer silently weaken the pixel-exactness gate.

## 41. v7 is in the player, and the model it is scored by was 18% wrong (session 12)

> **41.2's FRAMING IS SUPERSEDED BY 42.** This section ends by naming the rate
> point as a fork the user must choose. There is no fork: the span pass
> saturates at ~837 KB/s on its own, and the 488 KB/s ceiling it is scored
> against here was never a bus figure (42.1). The measurements below stand; the
> "two byte budgets" mechanism of 41.2 is what made 42 findable.

FINDINGS 40 measured v7 in `tools/bench/blit.s` and left it there. This builds it
into `src/player/decode.s`, defines the container that carries it, and scores
what the encoder actually delivers rather than what a selection model predicts.
Three things came out of it that were not on the list.

### 41.1 The decoder, and the format
`src/player/decode.s` gains `paint_spans`, which is `blit.s` v7 verbatim -- the
same instruction sequence, deliberately, because the 66.0/9.143/9.978 fit was
measured on that sequence and a tidier rewrite would silently invalidate it.

The container is **DLX3**: the span section sits between the 768-byte mode
header and the block payload, because that is the only place the 68000 can
reach without first parsing something of variable length.

```
u32 payload length
768 B mode header          spanned blocks read SKIP
u16 nspans
  nspans * { u32 GVRAM address, u16 coarse disp, c*48 B,
             u16 fine disp, f*4 B }
block payload              V1 -> 1 B, V4 -> 4 B, RAW -> 16 B
```

Every span record is a multiple of 4 bytes (4+2+48c+2+4f), so the section needs
no internal padding and the block payload starts aligned. `a1`, the mode-header
cursor, is one of v7's twelve payload registers, so it goes on the stack across
the pass: two long accesses a frame, against the 24 pixels a register buys per
chain unit.

**Pixel-exact under both CPU cores on the first run**, over a container where
every frame carries 128-216 spans painting up to 38% of the picture, with full
temporal recursion. `tools/analysis/16_span_roundtrip.py` is the new gate and it
is in `check.sh`: encode, write the container, read it back with the reference
decoder, compare to what the encoder recorded. It asserts it emitted enough
spans to have tested anything -- a round-trip over a span-less container is
green by vacuity, which is FINDINGS 40.6's lesson about the snapshot count.

### 41.2 There are TWO byte budgets, and conflating them hides the whole win
The first measured span encode looked like a regression: at the `scsi` profile
spans fired on 5 of 120 frames and bought almost nothing. The cause is not the
codec. **The lam search had already spent the byte allowance**, so the span pass
inherited a few hundred bytes of room.

FINDINGS 40's 18/120 was never scored at 280 KB/s. `14_dmac_chain.py` defaults
to `--bus 488` -- the PIPE -- and gives each frame 40,977 bytes. The profile's
is 23,228. **Those are two different budgets and only one of them is hardware.**
The profile is a chosen quality rate point; the pipe is a ceiling. Bytes between
the two buy a better picture if spent on `lam`, the 68000's deadline if spent on
spans, and nothing at all if left unspent.

So the encoder now takes both: `--kbps` sets the quality target and
`--span-kbps` the ceiling the span pass may draw on, flat per frame and not
banked, because a pipe cannot be saved up. The quality bucket is credited with
the BLOCK payload only -- charging it the span bytes drives it to its floor on
the first spanned frame and starves every later frame of quality for a budget
the spans were never drawing on.

Spans also run BEFORE `mu`, and that ordering is the point. Both controllers
make a frame decode in time; `mu` pays in quality and a span pays in bytes, and
a span carries literal source pixels so it *removes* that run's quantisation
error. Spending bytes we already have beats spending picture.

| 120-frame `scsi` window | KB/s | over budget | PSNR |
|---|---:|---:|---:|
| no spans | 278.3 | 86/120 | 29.27 dB |
| spans, profile budget only | 280.0 | 77/120 | 29.23 dB |
| **spans on the 488 KB/s pipe** | 487.7 | **34/120** | **29.63 dB** |

Scored with `17_span_delivered.py`, which reads the emitted span section and
prices exactly those spans -- no selection model at all -- in 14's additive
model: block decode + span painting + disk DMA.

### 41.3 The blit.s fit transfers into the player, to 0.2%
`prep_dlx.py` gained two synthetic all-SPAN frames (full-row runs, and 4-block
runs at the break-even). They price v7 inside `decode.s` against the constants
`span.sh` fitted in `blit.s`:

| | predicted | MAME | C68K | error |
|---|---:|---:|---:|---:|
| all-SPAN-64 (192 spans x 256 px) | 505,636 | 506,533 | 506,824 | +0.18% |
| all-SPAN-4 (3072 spans x 16 px) | 734,193 | 735,133 | 735,304 | +0.13% |

Per 4x4 block that is **151.2 and 225.6 clocks, against FINDINGS 40's table of
151 and 226**. The mode costs what it was said to cost, in the real decoder, on
two emulators.

### 41.4 The rig had been writing past the top of RAM
`prep_dlx.py` truncated the real frames to a RAM budget and then appended its
synthetic timing frames ON TOP, 26 KB past the 0x200000 top of a 2 MB machine.
Survivable while it lasted, because the modes it overran are data-independent:
reading junk payload costs a V1 or a RAW block exactly what reading pixels
costs, so the anchors timed correctly by luck.

**A span is not data-independent.** Its two jump displacements come out of the
stream, so an out-of-RAM span record jumps into open bus. The synthetic frames
are now built first and their size comes out of the budget, with an assertion
that the stream ends below the top of RAM.

### 41.5 C_SKIP_MIXED was never measured, and it was 18% low
Chasing a 3% gap between the model and the measured decode turned up the one
constant in `vq_hybrid`'s cost table that came from a derivation rather than a
measurement: **the cost of a SKIP block sharing its header byte with a coded
block.** It was 45.0 from session 7 to session 12. It is **55.0**.

Every other constant comes from a synthetic frame of a single mode, and there
was no such frame for a mixed SKIP, *because one cannot exist* -- the byte has
to hold a coded block for the SKIP to be mixed at all. So `prep_dlx.py` now
emits four frames that bracket it, (3 SKIP + 1 V1), (1 SKIP + 3 V1), and the
same pair with RAW, each pair solving for the SKIP cost and its partner's
together:

| | MAME | C68K |
|---|---:|---:|
| mixed SKIP, from the V1 pair | 55.03 | 56.50 |
| mixed SKIP, from the RAW pair | 55.83 | 56.50 |
| V1, solved back out | 300.66 | 300.50 |

The partner solves back to its own anchored value to 0.2%, which is what says
the pair is measuring the SKIP rather than absorbing it. 55.0 is taken because
every other constant in the table is MAME's.

**The header bytes ROTATE through all four positions, and that is load-bearing.**
`decode.s` reaches a block's mode bits with `lsr.b #6/#4/#2` and no shift at all
for the last one, so a block costs 52/48/44/34 clocks of dispatch depending on
where in its byte it sits. A fixed pattern like 0x01 pins every SKIP to the
three expensive slots and every V1 to the free one, and solving two such
equations returns a number that describes no real frame. The first attempt did
exactly that, and a single-parameter fit against real frames then "confirmed"
87.7 -- collinear with the span term, and wrong.

With the constant corrected the model predicts the measured decode of a real
spanned container to **-0.06% on the mean and 0.09% worst frame**, against
-2.99% and 4.30% as it stood.

It matters more than 10 clocks a block sounds, because **a span marks its run
SKIP**: a spanned container is made largely of mixed SKIPs, so this is the
dominant population in exactly the frames spans are judged on. It is imported
now, not copied, in `spans.py` and `14_dmac_chain.py`.

*Incidental, and it resolved a false lead:* RAW and V4 read 3.2-3.5% higher on
C68K than on MAME, on mixed and pure frames alike. That is FINDINGS 37's known
table spread, not a property of mixed bytes -- but comparing a C68K-derived
solve against a MAME-derived anchor made it look like one for an hour.

### 41.6 Frames-over-budget is not a safe headline any more
The delivered 34/120 against 14's simulated 18/120 is a **1.4% difference in
mean frame cost** (786,381 clocks against 774,356). The metric is that
sensitive because the rate controller *aims* at the deadline: 55 of 120 frames
land within 5% of it, and shifting every frame by 1% moves the count from 25 to
47.

| every frame shifted by | -3% | -2% | -1% | 0 | +1% | +2% | +3% |
|---|---:|---:|---:|---:|---:|---:|---:|
| frames over budget | 18 | 21 | 25 | **31** | 47 | 61 | 63 |

This was a fair metric when nothing controlled to the budget. It is now a
measurement of where the controller aims, and any cost-model error is amplified
into a large count change -- which is how 41.5's 18% error stayed invisible.
**Report the cost distribution; quote the count only with its sensitivity.**
Add this to the §4 measurement traps.

## 42. The rate point dissolves: bytes are nearly free, and one constant decides everything (session 13)

Session 12 ended by naming the rate point as "the first real fork since the
profile was set" and asking the user to choose one. **The question turned out to
be mis-posed, and the user is what posed it correctly**: challenged on where the
488 KB/s constant came from, the answer is that it never came from the SCSI bus
at all, and the bus has roughly eight times that in it. Once bytes are that
cheap the rate point is not a choice, it is a saturation point the encoder finds
on its own -- and what actually decides whether the game runs is **the number of
clocks the SCSI DMA steals per word**, which is still unmeasured and now worth
more frames than every optimisation since FINDINGS 24 combined.

### 42.1 The 488 KB/s constant was never a bus figure
FINDINGS 18/21 recorded it as a user-supplied "4 Mbps" with no provenance, and
29.5 item 3 has carried "confirm the 4 Mbps figure" as an open item ever since.
Checked against the standard: **SCSI-1 (ANSI X3.131-1986) is an 8-bit bus at
~1.5 MB/s asynchronous and 5 MB/s synchronous** -- MB/s, not Mbps. The working
constant is 10% of the asynchronous rating and 3% of the deployment target's
(FINDINGS 21.2 committed to SD-backed SCSI in session 2).

So the pipe was never the binding resource on the I/O side. What binds is that
**a delivered byte is charged to the 68000's frame budget**, because the DMAC
stalls the CPU rather than overlapping with it (38.3). The pipe's units are
KB/s; the real currency is clocks.

### 42.2 The cheapest way to put a pixel on this screen is to not code it
Per pixel, in frame-budget clocks, with `W` the SCSI DMA's clocks per word:

| | wire bytes | paint | disk debit | total |
|---|---:|---:|---:|---|
| v7 literal span | 2 | 9.143 | `W` | `9.143 + W` |
| RAW block | 1 | 25.03 | `W/2` | `25.03 + 0.5W` |
| V1 block | 0.25 | 18.74 | `W/8` | `18.74 + 0.125W` |

A span pixel costs **two** wire bytes, not one: X68000 GVRAM in 256-colour mode
is one pixel per WORD with the high byte discarded (`spans.py:44`, and it is the
memory model both emulators are pixel-exact against), so the span path is a
straight `movem` copy that cannot pack. That 2x on bytes is exactly what buys
9.143 clocks/pixel.

**A span beats a RAW block for any `W < 31.7`**, i.e. everywhere in the 5..12
bracket of 39.7, and by a factor of nearly 2. The codec's expensive modes exist
to save bytes, and bytes have stopped being the scarce thing.

The budget is 833,333 clocks for 49,152 pixels = **16.95 clocks/pixel**. A
full-frame literal therefore needs `9.143 + W` to fit under ~16.1 after span and
all-SKIP overhead: **lossless fits iff `W` is about 6.5 or less.**

### 42.3 Measured: the span pass saturates at ~935 KB/s, 0.13 dB off the display
Encoded with `--kbps 280` held fixed and `--span-kbps` swept, so every column
below has the same quality target and differs only in what the span pass was
allowed to draw on. Scored with `17_span_delivered.py` over the emitted span
sections:

| container | KB/s | span px | PSNR | over @5 | @8 | @12 |
|---|---:|---:|---:|---:|---:|---:|
| `s12_280_off` | 278.6 | 0% | 29.27 dB | 76/120 | 86/120 | 109/120 |
| `rc_fr_singe_scsi_span` (the gate) | 487.7 | 26.6% | 29.63 dB | 11/120 | 34/120 | 78/120 |
| `s13_280p700` | 693.8 | 48.3% | 30.28 dB | 16/120 | 28/120 | 63/120 |
| `s13_280p1000` | 815.4 | 60.2% | 30.93 dB | 7/120 | 20/120 | 64/120 |
| `s13_280p1500` | 837.4 | 62.3% | 31.04 dB | **0/120** | 21/120 | 63/120 |
| `s13_lossless` (`--kbps 2000`) | 934.6 | 70.4% | **31.19 dB** | **0/120** | 47/120 | -- |

**`s13_280p1500` and `s13_280p2200` are byte-identical files.** The span pass
stops finding spans worth taking at ~837 KB/s; asking for more bytes returns the
same container. The rate point is not a choice between quality and deadline any
more, it is a saturation the encoder reaches by itself.

Three results worth separating out:

1. **0/120 is the first time anything in this project has fitted 12fps on every
   frame.** It is also the best picture yet: 31.19 dB against a **31.33 dB
   palette ceiling**, 0.13 dB off exact for this display.
2. **`mu` is never spent.** At span budgets >= 1000 KB/s, 0/120 frames need the
   CPU-fit lagrangian at all. The 0.62 dB FINDINGS 31 paid to make frames decode
   in time is refunded in full -- spans buy the deadline with bytes, and a span
   is pixel-exact, so the trade is quality-positive in both directions.
3. **Quality and deadline stopped competing.** Every earlier section on this
   project trades one against the other. Above ~800 KB/s more bytes improve
   both at once, until the span pass runs out of runs worth spanning.

### 42.4 So the whole result now hangs on `W`, and only on `W`
Read the columns of 42.3 sideways rather than down. At 934.6 KB/s:

| `W`, clocks/word | median frame | worst | over budget |
|---:|---:|---:|---:|
| 5 | 83.0% | 91.0% | **0/120** |
| 6 | 87.6% | 97.0% | **0/120** |
| 6.5 | -- | -- | crossover |
| 7 | 92.2% | 103.0% | 21/120 |
| 8 | 96.8% | 109.0% | 47/120 |

Moving `W` across its datasheet bracket costs more frames than moving the rate
from 280 to 935 KB/s wins. **`W` is now the most load-bearing unmeasured number
in the project**, displacing the 4 Mbps figure it just retired.

### 42.5 MAME settles which end of the bracket applies, and cannot settle the number
STATUS has carried "benchmark `x68000 -exp1 cz6bs1`, never `x68ksupr`" since
session 10, and the note reads as a hardware claim. **It is not one, and the
user was right to challenge it.** Both machines use the same MB89352 SPC --
`x68k.cpp:834` maps it at `$E96020`, `x68k_scsiext.cpp:83` at `$EA0000` -- and
neither needs a driver because SCSI IOCS is in ROM. The difference is an
emulation gap: `x68k.cpp:1176` is literally `// TODO: duplicate DMA glue from
CZ-6BS1`.

The external board's glue is modelled, and reading it answers the mode question:

- `x68k_scsiext.cpp:110-136`: a transfer is a DMA cycle when `m_slot->exown()`
  -- the HD63450's **OWN** -- is asserted, so the DMAC holds the bus and the
  68000 is off it. It single-address reads the data register at `$EA0015` and
  **negates `#DTACK` whenever `DRQ` is not ready**, stalling rather than
  arbitrating away.
- `x68k.cpp:1114-1115, 1122-1123`: the slot's DTACK feeds `hd63450::dtack_w`
  and the DMAC's `own()` feeds back to the slot.

So the modelled CZ-6BS1 path is **cycle-steal with the bus held** -- the 5
clocks/word end of 39.7's bracket, not the ~12 arbitrated end. That is the end
where everything above fits.

**But MAME cannot give the constant, and asking it for one would be reading back
a hand-set table.** `x68k.cpp:1047-1048` configures the DMAC with
`set_clocks(attotime::from_usec(2), from_nsec(450), from_usec(4), ...)` and
`set_burst_clocks(...)` -- wall-clock attotimes, not the MC68450's per-operand
cycle counts. Same lesson as FINDINGS 39: the datasheet supplies constants, the
emulator supplies structure. Use MAME to confirm which handshake the player's
code actually provokes; use Fig 4-25 for what it costs.

### 42.6 Where the wait actually comes from, and why flash is the right premise
With DTACK gating the cost decomposes:

    W = 5 clocks (MC68450 single-address write, Fig 4-25 sheet 3)
      + however long the drive makes the DMAC wait for DRQ

The 5 is silicon and fixed. **The rest is the device**, and it is where 8 and 12
came from -- 8 was taken as a bracket midpoint in FINDINGS 5, not measured. A
period spinning SCSI-1 drive supplies a real wait; SD-backed SCSI with a modern
controller collapses it toward zero and leaves the floor. The deployment target
has been SD since session 2 (21.2), so **the favourable end of the bracket is
the one the actual hardware is on** -- which is what makes 42.3's 0/120 worth
taking seriously rather than filing as a best case.

This is a better-founded version of the user's argument than the bus rating was.
The bus rating is true and irrelevant; the wait term is what their premise
actually buys.

### 42.7 What is NOT established
Stated plainly, because 42.3 is the most favourable table this project has ever
produced and that is exactly when it should be distrusted:

1. **No 68000 has decoded a 70%-span container.** Every figure in 42.3 is the
   additive cost model. That model is validated to -0.06% mean / 0.09% worst on
   spanned containers (41.5), but the heaviest one ever *run* is the gate's
   26.6%. The rig loads the stream into a 2 MB machine, so a 934.6 KB/s stream
   is about **5 frames** -- getting coverage back needs a different rig
   (stream-in-chunks, or a larger machine as a deliberately-labelled non-target),
   not a longer pass. This is FINDINGS 36's lesson pointing at a new wall.
2. **`W` is unmeasured**, and 42.4 is the whole result's sensitivity to it.
3. **The ring buffer has never been simulated near this rate.** 98 KB/frame of
   span payload against 2 MB with no double buffer; `09_buffer_sim.py` last ran
   at 110 and 280 KB/s (29.5/30.7).
4. **Capacity is fine but should be stated:** 934.6 KB/s x 1366.6 s = **1.22 GB**
   for the whole game. Irrelevant on SD, fatal on anything period. This closes
   CD-ROM permanently rather than parking it (32.3).
5. **Span selection is still greedy after `lam`** (STATUS item 2, 39.3). At
   saturation that probably leaves something on the table rather than costing
   anything, but it has not been checked at this rate.
6. **The `--kbps 2000` container is not a shippable configuration**, it is a
   probe: it lets `lam` fall to its floor and asks what the span pass does with
   an unbounded budget. `s13_280p1500` at 837.4 KB/s is the honest candidate.

### 42.8 FINDINGS 17.5 was right, and was withdrawn for the wrong reason
Session 4 concluded: **"ship pixel-exact if SCSI sustains >=800 KB/s."** Session
5 withdrew it, because 17 had reasoned against a misread 4 MB/s and the
correction to 4 Mbps = 488 KB/s put 800 out of reach.

The correction was to the wrong direction of the error. 4 MB/s was indeed a
misread of the bus, but 488 KB/s was not a measurement either -- and the bus
really does have ~1.5-5 MB/s in it (42.1). **The delivered stream is 837.4 KB/s
at 0.29 dB off the palette ceiling**: 17.5's threshold, and 17.5's conclusion,
reached from the opposite end five sessions later by a route that never cited
it.

Worth recording as a methodology result rather than a curiosity. The project's
habit of appending corrections rather than editing history is what made this
recoverable at all -- but 17.5 spent five sessions marked "not available"
because a number nobody had sourced was allowed to retire a conclusion that had
been reasoned properly. **A correction is only as good as the constant behind
it**, and this is the second time that constant is the one at fault (compare
39: bus arithmetic retired the DMAC's first costing, and the datasheet retired
the retirement).

## 43. The disk debit was denominated per word, and the SPC is a byte-wide port (session 14)

Session 13 made `W` -- the clocks the SCSI DMA steals -- the one binding unknown
in the project, and 42.4 showed the whole result swinging on where in a 5..12
bracket it landed. **The bracket was in the wrong unit.** `W` was charged per
WORD of delivered stream, and the MB89352 is an 8-bit port: the DMAC pays per
BYTE. The debit is 2x what every table since FINDINGS 5 has charged, the
favourable end of the bracket was never physically reachable, and 42.3's 0/120
does not survive.

The result is not lost, but it is re-anchored 41% lower in rate and 1.85 dB
lower in picture, and it had to be re-encoded rather than re-scored -- because
the encoder was making its decisions in the wrong units too (43.6).

### 43.1 The floor argument needs no datasheet
A 68000 bus cycle is four clocks minimum. The SPC delivers one byte per bus
cycle. Therefore **no DMA of this device can cost less than 4 clocks/byte = 8
clocks/word**, before a single clock of DMAC overhead, the write cycle that
puts the byte in RAM, or any wait the drive imposes.

The retired bracket's own midpoint, 8 clocks/word, is that floor exactly; its
favourable end, 5 clocks/word, is **2.5 clocks/byte -- 62% of a single bus
cycle**. It implied a 4 MB/s DMA on a 10 MHz bus, on a SCSI-1 link 42.1 had
just established runs at 1.5 MB/s asynchronous. The number that retired the
4 Mbps figure should have retired this one in the same paragraph.

Independent cross-check, of the kind this project files as folklore rather than
measurement: BlueSCSI-class throughput on an X68000 is discussed at 0.7-1.7
MB/s. 5 clocks/byte is a 2 MB/s ceiling and 9 is 1.11 MB/s; 2.5 clocks/byte is
4 MB/s, which no one has ever reported on this machine.

### 43.2 The datasheet, per byte, for the transfer this actually is
Device-to-memory, 8-bit device, MC68450 Fig 4-25, all while the DMAC owns the
bus (note 2: reads 4 clocks, writes 5):

| how the DMAC is programmed | clocks per BYTE | source |
|---|---:|---|
| single address, D->M | **5.0** | sheet 2 |
| dual address, byte, no packing | **9.0** | sheet 4, the note on the 9-clock word case |
| dual address, byte packed to word writes | **16.5** | sheet 3: 14 clocks then 19, per two bytes |

Byte packing is *dearer*, not cheaper: the FIFO path carries 10 clocks of
inter-cycle overhead per operand where the unpacked path carries none.

To this, per period of bus ownership, add front-end overhead of **5 clocks best
case (Fig 4-23) or 8 worst (Fig 4-24)** and back-end of **2 (4.5.2.2)**.
Amortised over a sector that is noise; taken per operand it would add 7-10
clocks to every byte. **That is what actually rules out arbitrating per byte**
-- not the OWN pin (43.3).

**Which row applies is a wiring question, and it is worth 4 clocks on every
byte of the game.** Single-address needs the SPC's DACK driven from the bus's
`#EXACK` (pin B37, and the bus really does have it, `x68kexp.h`). MAME models
the dual-address row: an `exown`-gated byte read of `$EA0015` written to memory
with `space.write_byte` (`x68k_scsiext.cpp:110-121`, `hd63450.cpp:383-385`), and
it has no DACK path at all, so **MAME cannot settle this one either way.**

### 43.3 42.5's reading of the OWN pin was over-read
42.5 concluded from `x68k_scsiext.cpp`'s `m_slot->exown()` gate that the modelled
path is "cycle steal with the bus held", i.e. the 5-clock end. It does not say
that. `hd63450.cpp:366,447` asserts `m_own(0)` before **every** `single_transfer`
and negates it after, in every request-generation mode, and `x68kexp.h:131`
inverts it. So `exown()` distinguishes **a DMAC access from a CPU access** --
DMA versus PIO -- and says nothing about hold versus arbitrate. The check was
answering a different question than the one asked of it.

Two things about the board do survive, and they are the useful half:

1. **The glue's flow control is a stalled bus cycle, not a released bus.** When
   `DRQ` is low the board negates `#DTACK` and the DMAC waits mid-cycle
   (`hd63450.cpp:449`, `if (!m_dtack) return;` -- the operand does not advance).
   There is no path by which it hands the bus back inside a word. So whatever
   the drive makes it wait, it waits **holding the bus**, which is why the wait
   term of 42.6 is charged to the frame budget in full.
2. **MAME has no DRQ line from the expansion slot to the DMAC.** `x68kexp.cpp`
   has no such callback; DMAC channel 0 is wired to the FDC and channel 3 to the
   ADPCM (`x68k.cpp:1052-1053,159`). The real bus has `#EXREQ`/`#EXACK`
   (B36/B37), so external-request modes exist on hardware and are simply absent
   from the model. **Any request-generation experiment run in MAME would be
   measuring the gap, not the board.**

### 43.4 What it costs, on the containers session 13 already had
`17_span_delivered.py` and `14_dmac_chain.py` now take `--disk-clk-byte`;
`--disk-clk-word` is kept and halves it, so session 13's tables reproduce
exactly. Frames over the 12fps budget, 120-frame `singe` window:

| container | KB/s | 2.5 c/B (s13) | 5 c/B | 9 c/B | 16.5 c/B |
|---|---:|---:|---:|---:|---:|
| `s12_280_off` | 278.6 | 76/120 | 100/120 | 118/120 | 120/120 |
| `rc_fr_singe_scsi_span` (the gate) | 487.7 | 11/120 | 71/120 | 119/120 | 120/120 |
| `s13_280p1000` | 815.4 | 7/120 | 45/120 | 120/120 | 120/120 |
| **`s13_280p1500`** (s13's candidate) | 837.4 | **0/120** | 44/120 | 120/120 | 120/120 |
| `s13_lossless` | 934.6 | **0/120** | 87/120 | 120/120 | 120/120 |

**Nothing session 13 emitted fits at any point in the real bracket.** The
mechanism is 42.2's own table read at the right price. Per pixel, with `c` the
clocks per delivered byte:

    v7 literal span   2 bytes   9.143 + 2c
    RAW block         1 byte    25.03 + c
    V1 block          0.25 B    18.74 + 0.25c

A span beats RAW for `c < 15.9` -- still true everywhere real. But **a span
beats a V1 block only for `c < 5.48`**, and that crossover sits between the
single-address row and the dual-address row of 43.2. The span pass is not
robust to the wiring question; it is decided by it. The encodes in 43.6
confirm the prediction: spans paint 30.7% of the picture at `c=5` and 3.9% at
`c=9`.

### 43.5 A frame's cost is now, to three figures, its byte count
On `s13_280p1500` at 5 clocks/byte, `corr(bytes, total frame clocks) = 0.989`,
and the disk term's p10..p90 spread (281k..464k clocks) is most of the frame
total's (713k..966k). Frames that miss carry 87,203 bytes on average against
61,295 for frames that fit.

**Which breaks the rate controller's bucket.** It banks bytes across 8 frames
because the player's ring buffer can hold them -- true, and irrelevant now:
those bytes are also clocks, and FINDINGS 28 established there is no double
buffer to decode ahead into, so **a frame that borrows bytes from the bucket
borrows clocks it cannot bank.** Byte smoothing was free when bytes were free.
It is now a direct source of deadline misses.

### 43.6 The encoder was never told a byte costs anything either
This is why the session could not just rescore. `ratectl.py` bisected `mu`
against 833,333 cycles of DECODE, with no disk term, and `spans.select()`
admitted a run "only if the span beats the blocks it replaces on cycles ALONE"
-- explicitly ignoring the bytes it adds. Both now work in one currency:

- `ratectl.DISK_CLK_BYTE` (default **5.0**, `encode.py --disk-clk-byte`) is
  charged inside the CPU ceiling, so every fit test is `decode + c*bytes`.
- `spans.select()` admits and ranks on **net** clocks, `(clocks won) - c*(bytes
  added)`. At `c=0` both reduce exactly to the old rules, and
  `--disk-clk-byte 0` re-emits `s13_280p1500` byte for byte (8,501,948 B,
  31.04 dB) -- so the change is the price, not the codec.

Re-encoded honestly, 120-frame `singe` window, 12 fps:

| | KB/s | PSNR | loss vs ceiling | over budget | span px |
|---|---:|---:|---:|---:|---:|
| s13's claim (2.5 c/B) | 837.4 | 31.04 dB | 0.29 dB | 0/120 | 62.3% |
| **`s14_d5_all1500`, single address** | **496.7** | **29.19 dB** | 2.14 dB | **1/120** | 30.7% |
| `s14_d9_all1500`, dual address | 255.0 | 28.50 dB | 2.83 dB | **1/120** | 3.9% |

**The one frame over is frame 0** in both -- the intra frame, which FINDINGS
28.5/31 already established is emitted late on purpose because there is nothing
on screen to hold. **Every other frame lands at or under 100.0%**: the
controller now binds exactly on the joint budget. `17_span_delivered.py`, which
shares no code with the encoder's own accounting, reproduces both rows to the
digit.

Two smaller results fall out:

1. **`--spans all` is now the better rule, and `--spans need` the worse one**
   (275.8 KB/s, 28.92 dB, 2/120). `need` stops as soon as the frame fits and
   leaves profitable clock savings unbought; once profitability is measured in
   one currency, spending every profitable byte *is* the optimum. My
   recommendation is to make `all` the default; that is my inference, not a
   measurement.
2. **`--span-kbps` has stopped binding.** 700 and 1500 produce identical files.
   Session 13's saturation was the byte ceiling running out; this one is the
   span pass running out of runs that pay, which is a property of the codec
   rather than of a chosen number.

### 43.7 What this withdraws
- **42.3's 0/120 and "quality and deadline stopped competing".** They compete
  again, and harder than before: a byte now buys picture and spends deadline.
- **42.3's "`mu` is never spent"** and the refund of FINDINGS 31's 0.62 dB.
  `mu` is spent on 103 of 120 frames at `c=5` and 118 at `c=9`.
- **42.8's revival of 17.5** ("ship pixel-exact if SCSI sustains >=800 KB/s").
  The stream that fits is 496.7 KB/s and 2.14 dB off the palette ceiling, so
  17.5's threshold is not met and its conclusion does not return. The
  methodology point in 42.8 stands and now applies to itself.
- **`docs/BENCHMARK.md`'s "~8 clocks/word => ~2.5 MB/s practical ceiling".**
  The ceiling is 2 MB/s at best (5 clocks/byte) and 1.11 MB/s dual-address.
- **FINDINGS 5's 8 clocks/word**, retroactively, wherever it was used: every
  I/O debit in the project before this section was charged at half rate.

### 43.8 What is NOT established
1. **Single-address versus dual-address is a hardware fact this tree cannot
   check.** It is worth 242 KB/s and 0.69 dB, and MAME models only the dual
   row (43.2). It needs the CZ-6BS1 schematic or a real board -- and note it is
   the *board's* wiring, not our code, so unlike every previous item on this
   list it is not a design decision we get to make.
2. **The 5 and the 9 are datasheet floors with the drive wait set to zero.**
   42.6's argument that SD-backed SCSI collapses that term is unchanged and
   still unmeasured.
3. **Front-end and back-end overhead are excluded**, which assumes at least a
   sector per period of bus ownership. If the player ends up taking the bus per
   operand, add 7-10 clocks to every byte and nothing fits at all.
4. **Still no 68000 has decoded any of these containers** (42.7 item 1). The
   new ones are lighter in spans than the gate, so that gap is narrower than it
   was, but it is the same gap.
5. **The bucket has not been fixed**, only diagnosed (43.5).

### 43.9 The unit was never written down
The error is one substitution -- bytes/2 for bytes -- and it survived from
FINDINGS 5 through nine sessions, two cost-model rewrites, a datasheet reading
that corrected the *value* of the same constant (39.7), and a section devoted
to distrusting the table it produced (42.7, which lists six things 42.3 did not
establish and does not list its own denominator).

What let it hide: `W` was carried as "clocks per word" in three tools and a
half-dozen tables, and **the device's port width was never in the same sentence
as it.** The 8-bit-ness of the MB89352 was known -- it is visible in
`install_device(..., 0x00ff00ff)` and in every register map in the project --
but it lived in the I/O notes while `W` lived in the budget arithmetic.

The rule this project already had (FINDINGS 33: a design that counts only CPU
shows a win the I/O it created takes away) needed one more clause: **check what
the unit is denominated in, on the device that supplies it.** A per-word debit
for a byte-wide port is a factor of two, and a factor of two is the difference
between this game running and not.

---

## 44. The byte-side rate controller is inert, and both inconsistencies in it are worth under 2% (session 15)

STATUS's item 2 asked for the leaky bucket to be fixed: 43.5 diagnosed it as
banking bytes that are now clocks, across a player with no double buffer to
bank clocks in, and called it "a direct source of deadline misses". The
diagnosis is correct as a mechanism. **It is not a source of anything at the
operating point this project actually recommends**, and neither is the second,
larger-looking inconsistency found next to it. Both are now implemented, both
measure as a wash or a regression, and **both ship off by default** --
`--joint-decide` and `--joint-bucket` turn them on.

Everything below is the 120-frame `singe` window, `--profile scsi --kbps 280
--span-kbps 1500`, `c = 5` clocks/byte, 12 fps, scored both by the encoder and
by `17_span_delivered.py`, which shares no code with it.

### 44.1 The mode decision was the last place a byte was free
43.6 charged the disk inside the rate controller's fit test and inside
`spans.select()`, but `vq_hybrid.decide()` still minimised `D + lam*bytes +
mu*cycles` with `cycles` meaning DECODE cycles only. So while `mu` was
enforcing a joint budget from above, the per-block lagrangian underneath it
still believed delivery was free.

**That inverts FINDINGS 28.8.** RAW is 400.4 cycles against V4's 448.2, so with
a free byte, raising `mu` buys cycles by moving V4 -> RAW -- which is exactly
what 28.8 observed and what session 8's `0c` recorded as V4 collapsing. Priced
per delivered byte, a RAW block costs `400.4 + 16c` and a V4 block `448.2 + 4c`:

| c, clocks/byte | V1 | V4 | RAW |
|---:|---:|---:|---:|
| 0 | 299.9 | 448.2 | **400.4** |
| 2.5 (the retired 5 clk/word) | 302.4 | 458.2 | **440.4** |
| **3.98** | 303.9 | **464.3** | **464.3** |
| 5 (single address) | 304.9 | **468.2** | 480.4 |
| 9 (dual address) | 308.9 | **484.2** | 544.4 |

**The crossover is c = 3.98 and 43.1's floor argument is c >= 4.** A 68000 bus
cycle is four clocks and the SPC hands over one byte per cycle, so RAW's cycle
advantage does not exist on any real machine: it was spending 12 clocks of bus
to save 47.8 of CPU. The escape hatch was an artefact of the same free byte
that FINDINGS 43 found everywhere else.

### 44.2 And correcting it changes almost nothing
`decide()` now takes `byte_clk` and prices a payload byte at `lam + mu*byte_clk`.
At `byte_clk = 0` it is the old decision exactly, and the containers of session
14 re-encode to the same MD5.

| `--spans all`, c=5 | KB/s | PSNR | mean frame clocks | over budget | worst |
|---|---:|---:|---:|---:|---:|
| the shipped decision | 496.7 | **29.19** | **740,049** | 1/120 | 112.9% |
| `--joint-decide` | 482.5 | 29.17 | 745,438 | 1/120 | 112.9% |

It **buys 6,058 clocks of disk with 17,207 clocks of block decode** -- a net
5,389 clocks a frame in the wrong direction. Scored at c=4 and c=9 it is the
marginally worse container at every price, so this is not a bet on which row of
43.2 wins. The reason is scale, not sign: at the `mu` the controller actually
settles on (median 0.74-0.91) the added byte price is `mu*c` ~ 4 against a
`lam` floor of 10, and the RAW/V4 decision is dominated by V4's distortion term
rather than by either. RAW moves 16.0% -> 15.7% of blocks.

**The inconsistency was real, the correction is right, and the effect is 0.02 dB.**

### 44.3 The bucket does not bind, and at `--spans all` nothing on the byte side does
Before fixing the bucket, measure whether it is loaded. It is not:

| `--spans all`, c=5 | KB/s | PSNR | over budget | container |
|---|---:|---:|---:|---|
| `--bucket-frames 8` (shipped) | 496.7 | 29.19 | 1/120 | baseline |
| `--bucket-frames 32` | 496.7 | 29.19 | 1/120 | **byte-identical** |
| `--bucket-frames 1` (no banking at all) | 498.0 | 29.19 | 1/120 | +1.3 KB/s |
| `--rc-floor open` (lam floor 1.0) | 503.7 | 29.21 | 1/120 | +0.02 dB |

**`lam` never leaves its floor of 10.0 on any of 120 frames**, in any of these,
and quadrupling the bucket emits the same bytes. With `--spans off` at 259.3
KB/s under a 280 KB/s target, a 1-frame bucket and an 8-frame bucket are again
byte-identical. The block coder at the profile floor simply lands under the
per-frame byte budget, so there is nothing for the bucket to lend and nothing
for the lam bisection to do. **The rate this project reports is set by the span
pass and by `mu`; `--kbps` and the bucket are not the levers.**

The one place the bucket does cost something is the mode 43.6.1 recommends
abandoning: at `--spans need` it is worth exactly one frame of 120.

### 44.4 The cap, and why capping only half a frame is worse than not capping
`--joint-bucket` caps what the bucket may lend at what the frame's clock budget
can still absorb after its own block decode -- `(cycle_budget - cycles(mode0))
/ c`, priced at the mode map the un-banked budget buys, and never below that
budget. The bucket then smooths only what is left after the disk is paid, which
is what STATUS item 2 asked for.

| c=5 | KB/s | PSNR | median frame | over budget |
|---|---:|---:|---:|---:|
| `need`, shipped | 275.8 | 28.92 | 99.8% | 2/120 |
| **`need --joint-bucket`** | 302.1 | 28.91 | 99.9% | **1/120** |
| `all`, shipped | **496.7** | **29.19** | **87.9%** | 1/120 |
| `all --joint-bucket` | 506.4 | 29.18 | 89.6% | 1/120 |
| `all --joint-bucket`, cap extended to the span section | 273.7 | 28.88 | 99.4% | 1/120 |

**It RAISES the bitrate at `--spans all`**, which is the tell: capping the block
payload does not remove those bytes, it moves them into the span section, which
draws on its own flat pipe (41.2) and is not under the cap at all. So the third
row is the honest reading of "the per-frame ceiling should be joint and hard" --
and it is the worst container here, losing 0.30 dB and 233 KB/s for no change in
the frames-over count, because the cap starves the pass that was buying the
deadline in the first place.

There is no per-frame ceiling on the whole frame record anywhere in this
encoder, and **44.3 is why adding one has not been urgent**: the joint budget is
enforced after the span pass by `mu`, which is a controller that pays in
picture, and the byte-side ceiling it would replace is not binding.

### 44.5 An encode is 95% k-means, and that is now 2.7x faster, exactly
Prompted by the user observing that this should not take a minute a scene.
Profiled, a 120-frame encode was 60.6 s of which 60.8 s was two k-means runs
(the rest of the encoder, rate control and the span pass included, is about a
second). `VQ.assign` was all of it, and three things were on the floor, none of
which changes a label:

| | 1,474,560 2x2 blocks, k=256 |
|---|---:|
| as written | 1.83 s |
| `C.T` materialised once (a view makes BLAS re-copy it per chunk) | 1.02 s |
| chunk 8192 -> 2048 (the `(chunk,k)` temporary, cache not memory; 32768 is 2.80 s) | 0.81 s |
| 8 threads over the chunk loop (numpy releases the GIL in both matmul and argmin) | **0.31 s** |

Partitioning rows cannot change an `argmin`, so the labels are bit-identical to
the serial ones and every container this encoder emits still hashes the same --
which is the assertion, not the hope: `s14_d5_all1500` re-encodes to
`d13d142b...` on both sides of the change. Whole encode 60.6 s -> 29.4 s,
`H.build` 60.9 -> 22.2 s. What is left is `np.add.at` in the centroid update
(~5 s of 22), and taking it costs the bit-exactness, so it stays.

At 0.18 s/frame the 22.8 minutes of unique scene footage is ~50 minutes of
codebook training, single machine, single pass.

### 44.6 What this does NOT establish
1. **It does not re-open the c=5 vs c=9 question** (43.8.1), which is still the
   largest open number and still a hardware fact this tree cannot check.
2. **The 1/120 is the same 1/120** -- frame 0, the intra frame, emitted late on
   purpose. Nothing here moved it, and 43.8's five caveats all stand.
3. **`--spans all` remains a recommendation, not a measurement** (43.6.1), and
   44.3 sharpens why it matters: it is the only lever on this side of the
   encoder that does anything.
4. **The pixel-exact gate now covers 37 of 120 frames**, down from 80 in session
   10 (FINDINGS 36) -- the span-heavy container outgrew the 2 MB machine. The
   strongest test in the tree audits under a third of the window it names. That
   makes STATUS item 3's chunk-streaming rig load-bearing rather than optional.
5. **Two fixes, both correct, both defaulted off.** The pattern worth keeping is
   that the second one was found by asking whether the lever was loaded before
   pulling it, and 44.3 took four encodes to establish -- against a session that
   could have been spent making a bucket cap work.

### 44.7 No decoder at all: what a literal frame costs, and where it dies
Asked by the user: does streaming raw preprocessed frames straight into video
memory save the CPU? On clocks, yes -- completely. It dies on the medium, and
the arithmetic is worth writing down because it also retires the last line of
42.2 still standing in the wrong units.

**Two versions, and the split is the answer.** A frame is 256x192 = 49,152
pixels; 256-colour GVRAM is one pixel per WORD with the high byte discarded
(42.2, `spans.py:44`, and the memory model both emulators are pixel-exact
against), so a literal frame is **98,304 bytes of GVRAM writes** against a
budget of 833,333 clocks = **16.95 clocks/pixel**.

*1. The CPU paints it.* This is what a v7 span already is -- literal GRB555
words, preprocessed offline, copied by `movem` -- at `9.143 + 2c` clocks/pixel:

| | clocks/pixel | vs 16.95 |
|---|---:|---|
| c = 3.906 | 16.95 | breakeven |
| **c = 4.0**, the 43.1 floor | **17.14** | **misses by 1.1%** |
| c = 5.0, single address | 19.14 | misses by 13% |
| c = 9.0, dual address | 27.14 | misses by 60% |

**A CPU-painted full-frame literal does not fit at any physically reachable
price**, and it misses at the floor itself. This supersedes 42.2's "lossless
fits iff `W` is about 6.5 or less", which was denominated per WORD: 6.5
clocks/word is 3.25 clocks/byte, below the 4-clock floor, so that threshold was
never reachable either. FINDINGS 43 withdrew the tables downstream of the unit
error but not this line; it is withdrawn here.

*2. The DMAC writes device -> GVRAM and the CPU is not in the loop.* The 9.143
disappears and a pixel costs only its two wire bytes:

| c | clocks/frame | % of budget | wire | 22.8 min of game |
|---:|---:|---:|---:|---:|
| 4.0 | 393,216 | 47.2% | 1,152 KB/s | 1.61 GB |
| **5.0** single address | **491,520** | **59.0%** | 1,152 KB/s | 1.61 GB |
| 9.0 dual address (the row MAME models) | 884,736 | **106.2%** | 1,152 KB/s | 1.61 GB |
| 16.5 packed | 1,622,016 | 194.6% | 1,152 KB/s | 1.61 GB |

**At c=5 it fits, with 41% of the frame budget left and no decoder at all.** It
is defeated by delivery, not by the 68000: 1,152 KB/s is ~79% of SCSI-1
asynchronous (42.1) with nothing left for audio or seeks, and 1.61 GB is 2.3x
the 0.70 GB the shipping 496.7 KB/s container already needs -- which is itself
already past a CD-ROM. At c=9 it does not fit the clocks either.

**The waste is specific and it is the same one the span path pays.** Because the
high byte is discarded, half of every byte pulled off the disk is thrown away by
the hardware on arrival: two bytes of disk per byte of picture. That 2:1 is why
a span pixel costs `2c` and why 43.4's span-vs-V1 crossover sits at c=5.48. The
codec is not there to save CPU -- 44.7 shows the CPU can be removed outright --
it is there to save the wire.

**The one thing that would change this answer** is a packed write path into
256-colour GVRAM, two pixels per word. That halves the wire to 576 KB/s and
806 MB and puts a decoder-free player back in play. **It is NOT established
either way.** The tree's basis for one-pixel-per-word is that MAME and px68k are
both pixel-exact against that model, which is evidence about two emulators, not
about the CRTC and the palette hardware. It is the same class of question as
43.8.1 -- a service manual or a real board settles it, an emulator cannot, and
both emulators here would model a packed path identically wrong if it exists.

Note this is a different transfer from the one FINDINGS 39 costed and rejected.
39 priced **memory -> GVRAM** (the DMAC replacing v6's `movem` chain out of a
RAM stream buffer) and it lost by a clock. This is **device -> GVRAM**, with no
RAM staging and no CPU, and it loses to the disk instead.

## 45. The strongest test in the tree was short by 83 frames, and the fix was the rig's memory (session 16)

STATUS item 1 said the pixel-exact gate "needs the chunk-streaming rig, not a
longer pass." It needed neither. It needed a bigger emulated machine, and the
reason that was not obvious is worth more than the fix.

### 45.1 The constraint was the rig's, and the gate does not measure timing
`prep_dlx.py` preloads the whole container into emulated RAM at `STREAM=0x30000`
and `check.sh` ran the machine at `-ramsize 2M`, so the span-heavy gate container
-- 5,261,814 B of stream, ending at 0x534BF6 -- was truncated to the prefix that
fit. That was **37 of 120 frames**, down from 80 in session 10 (FINDINGS 36) as
the container grew.

The 2 MB was carried over from the timing rig, where it is correct: the locked
target is a stock 2 MB machine. But `check.sh` runs this gate under
`DLX_VERIFY_ONLY=1`, which **drops the cost anchors entirely** and asserts only
pixel-exactness. A verify-only pass makes no claim about the target's memory, so
it was never the 2 MB that was load-bearing here -- and preloading a whole
container is unlike the shipping player at *any* size, because the player streams
from disk into a ring buffer and never holds a window at once.

`RIG_RAM=6` in `check.sh` (MAME's x68000 accepts 1M-12M) covers all 120 frames.

### 45.2 The raise is licensed by measurement, not by convenience
Raising the emulated RAM to make a test pass is exactly the move that should be
distrusted, so it was checked rather than asserted. The full timing pass -- not
verify-only -- was run at `-ramsize 2M` and `-ramsize 6M`, and the **five
synthetic anchors come out bit-identical**:

| synthetic frame | 2M | 6M |
|---|---:|---:|
| all-SKIP | 40,729 | 40,729 |
| all-V1 | 921,187 | 921,187 |
| all-V4 | 1,376,881 | 1,376,881 |
| all-RAW | 1,229,883 | 1,229,883 |
| all-SPAN-64 | 506,533 | 506,533 |

They sit at **different addresses** in the two layouts -- the synthetic block is
placed after a 37-frame stream in one and a 120-frame stream in the other -- and
still cost the same, so MAME's cycle model does not depend on `-ramsize` over
this range. Every per-block constant in FINDINGS 24/30/41 is measured from these
frames and is therefore unmoved by the change.

### 45.3 The 37-frame prefix was a biased sample, and the quiet end was missing
The gate is now 120/120 pixel-exact on **both** cores -- MAME's 68000 and px68k's
C68K. (The C68K harness never had a RAM ceiling at all: its arena is 16 MB and
`RAMTOP` is defined but unused, so it was short only because it reads the blob
`prep_dlx.py` truncated.) What the extra 83 frames show is that the prefix was
not representative:

| anchor | 37-frame prefix | full 120 |
|---|---:|---:|
| min non-SKIP | 25.1% of blocks, 61.9% of budget | **15.2%, 53.6%** |
| median | 45.4%, 79.7% | **41.1%, 81.1%** |
| p90 | 52.3%, 93.1% | **48.5%, 91.1%** |
| max non-SKIP | 62.5%, 91.8% | 62.5%, 91.8% (same frame) |
| C68K sequential-pass mean | 693,886 cyc, **83.3%** | **641,444 cyc, 77.0%** |

The prefix **overstated the mean cost of the window by 8.2%**. It caught the
worst frame -- the max is the same frame in both -- but it never saw the quiet
end: the true minimum is 15.2% non-SKIP against the prefix's 25.1%, and 53.6% of
budget against 61.9%. The distribution the anchors exist to sample was cut off at
one end, which is the failure mode FINDINGS 25.6 warned about in a different
guise: a prefix is not a sample.

Note the direction. The prefix was **pessimistic**, so nothing downstream of it
was flattered, and no headroom claim in this tree was resting on the missing
frames. That is luck, not design.

### 45.4 What this does NOT establish
1. **The streaming path is still untested, at either RAM size.** The rig
   preloads; the player streams into a ring buffer. This gate proves the decoder
   is pixel-exact over a whole window, and says nothing about the ring buffer,
   the chunk boundaries, or the disk. The chunk-streaming rig STATUS item 1
   called for is still unbuilt -- it was just never what the 37/120 needed.
2. **The 2 MB target is unchanged.** `RIG_RAM` is the emulated machine's memory
   for a verify-only pass. `span.sh` and the session-7 timing reproduction still
   run at 2M, and the shipping player's memory budget is untouched.
3. **The truncation guard stays.** `prep_dlx.py` still truncates and announces
   it, and `check.sh` still reads the count back and greps for `TRUNCATED`. A
   heavier container, or a lowered `RIG_RAM`, brings it straight back.
4. **The moved anchors are a re-measurement, not a regression.** No constant
   changed; the frames the anchors point at did.

## 46. The 256-colour mask is defeatable, and a packed path is back in play (session 16)

STATUS item 2 asked whether 256-colour GVRAM has a PACKED write path -- two
pixels per word rather than one pixel per word with the high byte discarded. It
**The first answer was no and it was wrong** -- or rather, it was right about the
default write path and missed the register that turns the masking off. 46.1-46.3
record what was established and what was measured, and are kept as written.
**46.5 is the correction and it is the important part of this section.**

### 46.1 The answer is no, and the sub-word fields are PAGES, not pixels
Three independent lines, none of them a service manual (see 46.4 on evidence
class):

1. **A community hardware guide** (x68000-dev-guide, `docs/graphics.md`): "each
   pixel occupies exactly one word (2 bytes), regardless of the color mode." In
   256-colour mode the word packs **2 pages** -- page 0 is mask `$00FF` at the
   `$C00000` alias, page 1 is mask `$FF00` at `$C80000`.
2. **A Japanese retro-computing writeup** (wizforest), independently: 1 word = 1
   dot in every display mode, and in 256-colour mode only the lower 8 bits of a
   1 MB region are valid. It states the masking as the well-known nuisance it
   was, at a *different* depth: "16色モードでは 16bit を書き込んでもハード的に
   マスクされてしまって 4bit しか書きこまれない" -- in 16-colour mode a 16-bit
   write is hardware-masked down to 4 bits.
3. **px68k's write path**, which is the mechanism the other two describe:

```c
case 1:                                 /* 256 colors */
    if ( adr<0x100000 )
        if ( !(adr&1) ) {               /* the other byte of the word: discarded */
            ...
            if (adr&0x80000) adr+=1;    /* the $C80000 alias IS the other byte */
            adr &= 0x7ffff;
            GVRAM[adr] = data;
```

**The decisive detail is that both pages derive `line` identically**, from
`(adr&0x7ffff)>>10` -- 1024 bytes per scanline for 512 pixels. Page 0 and page 1
are the two bytes of one word **at the same screen coordinate**. The same holds
in 16-colour mode, where `page = (adr>>17)&0x0c` selects one of four nibbles of
the word: four pages, one coordinate. There is **no graphics mode in which one
16-bit word holds two horizontally adjacent pixels.**

### 46.2 The near-miss is worth writing down so it is not re-derived
Page 1 has its own scroll register, so scrolling it one pixel relative to page 0
would put its byte at screen x+1 while page 0's sits at x -- two adjacent screen
pixels from one word. It does not work, and the arithmetic is why: page 1 stores
a byte for **every** coordinate, not every other one, so to let page 0 show
through on alternate columns you must write page 1's transparent index there.
That is the same byte count. 1024 bytes per row still buys ~512 screen pixels.
The 2:1 is structural, not an addressing accident.

**So FINDINGS 44.7 stands unchanged.** The decoder-free player still needs
1,152 KB/s and 1.61 GB, and is still killed by the medium. The `2c` span pixel,
the c=5.48 span-vs-V1 crossover, and every figure resting on two disk bytes per
picture byte are unmoved.

### 46.3 But the text plane is 4bpp PLANAR, and that is 4x denser on the wire
The tax is a property of the *graphics* planes. The X68000's text plane is not
laid out that way at all -- px68k's `TVRAM_Write` addresses **four planes at
`0x20000` stride**, each 0x20000 = 131,072 B = 1024x1024 **bits**. That is 4bpp
planar: **0.5 bytes per pixel**, against 2.0 for 256-colour graphics.

The wire arithmetic, and it is only arithmetic:

| surface | B/pixel | frame (256x192) | at 12fps | 22.8 min of game |
|---|---:|---:|---:|---:|
| 256-colour graphics, literal (44.7) | 2.0 | 98,304 | 1,152 KB/s | 1.61 GB |
| **shipping DLX3 container, compressed** | -- | -- | **496.7 KB/s** | **0.70 GB** |
| **4bpp planar text plane, literal** | **0.5** | **24,576** | **288.0 KB/s** | **0.40 GB** |

**An UNCOMPRESSED 16-colour frame is 42% cheaper on the wire than this project's
compressed 256-colour stream**, and it needs no decoder at all -- the planar
conversion is an encoder-side transform, so the disk delivers plane words that
go straight out. On clocks it is not close either: 24,576 bytes/frame is
`24,576c`, which at c=5 is 122,880 clocks = **14.7% of a 12fps budget**.

**It was measured the same session, and it is dead.** `tools/analysis/18_text_plane_16col.py`
over the 120-frame `singe` window, PSNR against the 24-bit source, generous to
the 16-colour side on every axis the hardware allows -- per-frame palettes (the
text palette is 16 entries; reloading it is 16 words a frame, nothing against
833,333 clocks) which the 256-colour path *cannot* use, because its codebooks
are indices into a scene-wide palette:

| | mean PSNR | min | max |
|---|---:|---:|---:|
| 256 colours, scene palette (the tree's) | 31.33 | 27.08 | 34.08 |
| 256 colours, per-frame palette | 34.08 | 32.19 | 38.32 |
| 16 colours, scene palette | 23.17 | 17.36 | 25.87 |
| **16 colours, per-frame palette** | **25.49** | 22.99 | 28.48 |

**256 -> 16 costs 5.84 dB at each side's best.** Against the shipping container's
**29.19 dB at 496.7 KB/s**, a 16-colour literal delivers **25.49 dB at 288.0
KB/s** -- **3.70 dB worse for 58% of the bitrate.** A codec that buys 3.70 dB for
1.72x the bytes is doing its job; the wire saving does not pay for the colours.

**Closed.** The user's call was to drop the 16-colour direction outright, and the
number agrees with it, so the text plane is not pursued. FINDINGS 7's 256-colour
claim stands, and it now stands on a measurement rather than on preference.

Two honest notes on that measurement:
- **The dither row is void.** A Floyd-Steinberg run was included and came out
  *bit-identical* to the undithered one, which means PIL ignored `dither=` under
  `MEDIANCUT` rather than that dither is free. It is left out of the table. It
  does not change the conclusion -- dither lowers PSNR by construction, and the
  lead was already 3.70 dB short.
- **Everything else about the path stayed unestablished and now stays that way**:
  TVRAM wait states (every `c` in this tree is a GVRAM figure), the text plane's
  geometry and priority against the graphics planes, and the fact that a planar
  word spans 16 pixels of one bitplane, so VQ blocks and v7 spans -- both chunky
  -- would not survive the change unaltered. None of it was worth measuring once
  the colour cost came in.

### 46.4 Evidence class, stated plainly
46.1 is **secondary documentation plus an emulator's mechanism**, not primary. No
service manual, CRTC databook, or real board was consulted. What changed since
44.7 is the *kind* of evidence: 44.7 rested on MAME and px68k both being
pixel-exact against one-pixel-per-word, which is evidence about two emulators
that could be identically wrong. Now two independent documents describe the same
mechanism -- sub-word fields are pages sharing a coordinate -- and px68k's code
implements exactly that mechanism, including the `$C80000` alias landing on the
adjacent byte. Agreement on a mechanism is much harder to get wrong by accident
than agreement on an output.

It is still not a board. STATUS item 3 (single- vs dual-address, 43.2/43.3) is
unaffected by any of this and remains the largest open hardware fact.

### 46.5 CORRECTION: CRTC R20 bit 11 turns the masking off
46.1 concluded there is no packed write path. That conclusion was drawn from
px68k's `GVRAM_Write` and two documents describing the default behaviour, and it
**missed a register bit that both emulators implement**. MAME's
`x68k_crtc_device::gvram_w` shows it first:

```c
if (m_reg[20] & 0x0800)          /* "G-VRAM set to buffer" */
{
    if (offset < 0x40000)
        m_gvram_write_callback(offset, data, mem_mask);   /* FULL WORD, unmasked */
}
else switch (m_reg[20] & 0x0300)
{
    case 0x0100:                                          /* 256 colour */
        if (offset < 0x40000)
            m_gvram_write_callback(offset, data & 0x00ff, 0x00ff);
        else if (offset < 0x80000)
            m_gvram_write_callback(offset - 0x40000, (data & 0x00ff) << 8, 0xff00);
```

The `case 0x0100` arm confirms 46.1 exactly -- `offset - 0x40000` is the **same
word, other byte**, and `data & 0x00ff` throws the CPU's high byte away on both
aliases. But the `m_reg[20] & 0x0800` arm bypasses the depth switch entirely and
writes the full 16 bits.

**px68k has the identical bit**, which is what makes this a mechanism and not a
MAME quirk: `if (CRTC_Regs[0x28]&8)`, commented `65536モードのVRAMアクセス
（Nemesis用）` -- "65536-mode VRAM access, for Nemesis". px68k's `CRTC_Regs` is
byte-indexed, so `[0x28]` is the **high byte of R20** and bit 3 of it is bit 11
of the register. Same bit, same effect, two independent implementations, and a
named shipping game that used it.

**So the 2:1 tax is a property of the default write path, not of the memory.**

### 46.6 A contiguous packed layout, derived and NOT yet tested
The second thing 46.1 missed is that the two 256-colour pages have **independent
scroll registers**. px68k's `Grp_DrawLine8(int page, int opaq)` indexes
`GrphScrollX[page*8]` and `GrphScrollY[page*8]`, selects the byte within the word
with `add esi, ecx` (page 0 -> low, page 1 -> high), and takes an `opaq` flag --
so the pages composite with transparency and can be offset from each other.

46.2 dismissed interleaving on byte count, and that dismissal assumed a 1-pixel
scroll. **Scrolling by 128 instead makes the used words contiguous**, which is
the whole difference:

- GVRAM row stride is fixed at 1024 bytes = 512 words (`shl esi, 10`).
- Write words 0..127 of each row, **unmasked, full 16 bits** (R20 bit 11).
- Page 0, unscrolled: `page0[i]` displays at screen column `i` -> columns 0..127.
- Page 1, X-scrolled by **+128**: `page1[i]` displays at column `i+128` ->
  columns 128..255.
- Page 1 opaque and above page 0, so page 0's stale storage at 128..511 is
  covered; page 1's storage at 128..511 displays at 256..383, which is off the
  edge of the **real 256x256 mode this project already uses** (FINDINGS 23).

**128 contiguous words carry 256 pixels: 1.0 byte per pixel, against 2.0.** No
transparency mask to maintain, no stride for a DMAC to skip, and the writes are
`movem`-shaped. If it holds, it is exactly the halving 44.7 named:

| | B/pixel | frame | at 12fps | 22.8 min |
|---|---:|---:|---:|---:|
| 256-colour, default masked path | 2.0 | 98,304 | 1,152 KB/s | 1.61 GB |
| **packed via R20 bit 11 + page scroll** | **1.0** | **49,152** | **576 KB/s** | **0.81 GB** |

**This is a derivation, not a result.** What is CONFIRMED is the register bit
(both emulators, plus a named game) and the per-page scroll and opacity (px68k's
draw path). What is DERIVED and untested is the layout above: whether R20 bit 11
coexists with 256-colour *display* rather than forcing the 65536-colour
interpretation, whether the video controller's priority and transparency
registers can put page 1 over page 0 the way this needs, and what the 256-wide
screen does to page 1's off-edge storage.

**Unlike 43.2 and 43.8.1, this one the tree CAN answer.** It is a display-model
question, both emulators implement the mechanism, and the rig already screenshots
and compares pixel-exactly (`tools/bench/verify_frame256.py`). It is a register
setup and a snapshot, not a service manual -- and if it holds it halves the wire
for every path in this project, the shipping codec included.

## 47. The packed layout works on both emulators, and they disagree about what it costs (session 16)

46.6 derived a 1.0 byte/pixel layout and did not test it. It has now been built
and run on **both** emulators. **It renders correctly on both.** The two
disagree on two register semantics, and one of those disagreements decides
whether the thing is usable.

### 47.1 The write path, measured directly
`tools/bench/probe_packed.lua` writes one word and reads the two page aliases
back, under MAME:

| R20 | wrote | raw word | page 0 (low byte) | page 1 (high byte) |
|---|---|---:|---:|---:|
| 0x0110, bit 11 = 0 | `AB5C` | `005C` | `5C` | `00` |
| **0x0910, bit 11 = 1** | `AB5C` | `AB5C` | `5C` | **`AB`** |

**That is the 2:1 tax, and its off switch, in one table.** Masked, the CPU's high
byte is destroyed. In buffer mode one word write lands two picture bytes.
46.5's reading of `gvram_w` is confirmed by experiment, not just by code.

### 47.2 The packed layout renders correctly, on both
`tools/bench/show_frame256_packed.lua` (MAME) and `tools/bench/gvpack` (px68k):

- page 0, opaque bottom, unscrolled -> screen columns 0..127
- page 1, transparent top, X-scroll **384** -> columns 128..255, because column
  `c` fetches `page1[(c+384) & 511]`
- words 0..127 of each row carry both halves: `(right << 8) | left`
- words 128..511 zeroed **once** -- page 1's storage at 384..511 sits under
  columns 0..127 and must read 0 so the opaque page 0 shows through. Static
  setup, not per-frame payload.
- the blob is built `--pack-transparent`: index 0 is the transparency key, so it
  never appears in the picture and black lives at 255.

| | result | palette ceiling |
|---|---|---:|
| MAME, `verify_frame256.py` | **256x192 pixel-exact, letterbox true black** | 40.83 dB |
| px68k, `verify_gvpack.py` | **256x192 index-exact, letterbox on 255** | 40.83 dB |

**Per-frame payload: 128 words/row x 192 rows = 24,576 words = 49,152 bytes for
49,152 pixels. 1.0 B/pixel, against 2.0.**

`tools/bench/gvpack` links px68k's real `x68k/gvram.c` -- the address decode, the
bit-11 write path, the page-byte selection, the scroll wrap and the index-0
transparency test are px68k's own code, the way `tools/bench/c68k` links its CPU
core. The only mirrored part is `windraw.c`'s twelve-line page-ordering
dispatch, which is SDL-bound; it is quoted verbatim in `pick_order()`.

**Four negative controls, because a test that cannot fail proves nothing:**

| control | expected | got |
|---|---|---|
| ordinary unpacked 2.0 B/px path | pass | pass |
| packed, **bit 11 OFF** | fail | fail: right half is 24,576 px of index 0 |
| packed, **page-1 scroll removed** | fail | fail: 49,073 px differ |
| packed, priority `vc1=0x00` | fail (per MAME) | **PASS on px68k** -- see 47.3 |

### 47.3 Disagreement 1: the priority register, when the fields are equal
Video controller R1 (`0xE82500`) decides which page composites on top.

| `vc1` | MAME | px68k |
|---|---|---|
| `0x0000` | page 1 **not shown** -- right half black, 24,576 px differ | page 0 on top **transparently** -- renders correctly |
| `0x0002` | page 1 on top, **correct** | page 1 on top, **correct** |

They agree at `0x0002` and that is what the layout uses, so the result stands on
a setting both model identically. But the packed layout's correctness rests on a
register the two emulators do not model the same way, and neither is authority.

### 47.4 Disagreement 2: does buffer mode BLANK the display? -- and this one decides it
`tools/bench/probe_bit11_blank.lua` is the known-good 256-colour test with **one
line added**, setting bit 11:

- **MAME: the screen goes fully black.** Max channel 0, zero non-black pixels.
  Buffer mode is a write *window*, not a display mode -- which is why the working
  test clears bit 11 after painting.
- **px68k: it does not blank.** `Grp_DrawLine8` never reads `CRTC_Regs[0x28]`,
  and `gvpack --keepbuffer` renders the frame correctly with the bit still set.

**This is the question the packed path lives or dies on.** If MAME is right, the
graphics layer is blanked for the whole time the CPU or DMAC is painting, and a
12fps full-frame player would show black for whatever fraction of each frame the
paint takes. If px68k is right, the packing is free. Both are plausible readings
of "G-VRAM set to buffer", and px68k's own comment -- `65536モードのVRAMアクセス
（Nemesis用）` -- says the bit exists for a game that blasted graphics through it,
which is at least consistent with the write-window reading.

**It is a hardware fact, and it is now the cheapest high-value one outstanding**
-- cheaper than 43.2, because a single real board plus the two-line probe above
settles it, and because the answer moves more numbers.

### 47.5 What it would be worth, DERIVED
Arithmetic on measured constants, not measurements. **Every line below is void if
47.4 goes MAME's way**, and the mode-decision cost model (44.3, 43.1) would need
re-deriving from scratch either way.

| | default masked | **packed** |
|---|---:|---:|
| bytes/frame into GVRAM | 98,304 | **49,152** |
| word writes/frame | 49,152 | **24,576** |
| wire at 12fps | 1,152 KB/s | **576 KB/s** |
| 22.8 min of game | 1.61 GB | **0.81 GB** |
| DMAC device->GVRAM, c=5 | 59.0% of budget | **29.5%** |
| CPU-painted literal, c=5 | 19.14 clocks/px (**misses** by 13%) | **9.57 (fits, 44% spare)** |
| CPU-painted literal, c=9 | 27.14 (**misses** by 60%) | **13.57 (fits)** |

The CPU-painted row is the one that overturns something. 44.7 concluded "a
CPU-painted full-frame literal does not fit at any physically reachable price,
and it misses at the floor itself." Packed, one `movem` word carries two pixels,
so the per-pixel cost becomes `(9.143 + 2c)/2 = 4.571 + c` -- and it fits at c=5
**and** at c=9. That conclusion is withdrawn, conditionally on 47.4.

### 47.6 What this does NOT establish
1. **Correctness was tested, cost was not.** Both harnesses write GVRAM
   directly -- MAME through Lua's address space, `gvpack` by calling
   `GVRAM_Write`. Neither runs 68000 instructions, so no clock in 47.5 is
   measured. The `movem` shape of the packed writes is an assumption.
2. **The DMAC has not been near this.** 44.7's device->GVRAM transfer in buffer
   mode is untested, and 43.2's single- vs dual-address question sits underneath
   every `c` in 47.5.
3. **One frame, not a stream.** A static frame was painted and snapshotted.
   Nothing here exercises per-frame toggling of bit 11, and if MAME is right
   about blanking, that toggling is the whole problem.
4. **The codec was not considered.** VQ blocks and v7 spans address chunky
   pixels; under the packed layout a word spans two columns 128 apart. Whether
   the existing codec survives that is untouched -- 47 is about a literal frame.
5. **Two of 46.6's three assumptions held, one was wrong.** R20 bit 11 does
   coexist with 256-colour display (after clearing it), and the off-edge storage
   behaves. The priority guess was wrong: 46.6 assumed page 0 on top; it is
   page 1.

## 48. The blanking disagreement is not symmetric, and the paper trail favours MAME (session 17)

47.4 filed the blanking question as two emulators disagreeing, and called both
readings of "G-VRAM set to buffer" equally plausible. **They are not equally
plausible, and the two implementations are not making the same kind of
statement.** Nothing here is a board, so 47.4 is not closed -- but the prior
moves, and it moves against the packed layout.

### 48.1 px68k is silent, not dissenting
`grep -a` matters here: `x68k/gvram.c` carries EUC-JP comments, so a plain
`grep` treats it as binary and reports **no matches at all** for any pattern.
Read with `-a`, R20's high byte appears in exactly one file:

    $ for f in x68k/*.c x11/*.c; do n=$(grep -ac "CRTC_Regs\[0x28\]" $f); ...
    x68k/gvram.c: 6

and all six are the address decode -- lines 150/153/158 inside `GVRAM_Read`,
211/221/225 inside `GVRAM_Write`, where `CRTC_Regs[0x28]&8` is R20 bit 11 and
line 211 carries the comment `65536モードのVRAMアクセス（Nemesis用）`.

**No px68k display code reads the bit anywhere.** `Grp_DrawLine8` and
`x11/windraw.c` never consult it. So px68k does not model buffer mode as
non-blanking; it does not model the display side of buffer mode **at all**.
Its "no" is an omission.

MAME's "yes" is the opposite -- a deliberate, commented claim, made twice:

    x68k_v.cpp:407  if(m_crtc->gfx_layer_buffer())  // if graphic layers are set
                        return false;               // to buffer, they aren't visible
    x68k_v.cpp:766  if((m_video.gfx_pri == priority) && !m_crtc->gfx_layer_buffer() && ...

and the parallel bit 12 is modelled the same way for the text layer
(`x68k_v.cpp:756`, `!m_crtc->text_layer_buffer()`). Someone implemented a
semantic on purpose. **An assertion and a silence are not a tie.**

### 48.2 The register table names the bit "for display / for buffer"
Sharp's own R20 bit map, transcribed on Data Crystal's X68k IOMAP:

| bit | name | %0 | %1 |
|---|---|---|---|
| 12 | T-MEM | `表示用` | `バッファ用` |
| **11** | **G-MEM** | **`表示用`** | **`バッファ用`(bit 10〜8 は無効)**<br>`(G-VRAM が 65536 色表示時と同じ構造になる)` |
| 10 | SIZE | 512x512 | 1024x1024 |
| 9-8 | COL | %00 16 / %01 256 / %11 65536 | |

Two things in that one row:

1. **The bit is named "for display" against "for buffer"** -- not "16-bit write"
   or "unmasked access". The naming is MAME's reading.
2. **`bit 10〜8 は無効` -- the colour-mode field goes invalid.** COL is what the
   display side decodes a plane structure from. A layer whose colour mode is
   undefined has nothing to render with, which is a *mechanism* for blanking
   rather than a restatement of it.

The counter-reading survives, and it is the parenthetical: the doc says the
structure becomes the 65536-colour one, and does **not** say the screen goes
dark. That is why this is a shifted prior and not a result.

### 48.3 The cost of the MAME branch, DERIVED, and it is not a partial blank
47.4 left "measure what fraction of a frame the paint takes" as the fallback.
Bit 11 only has to be set across the GVRAM writes, so the blank interval is the
paint, not the frame. The measured blit is **53.6% of the frame budget**
(session 9) unpacked; packed halves the word count, so the floor is ~27% and the
ceiling ~54% depending on how much of the blit is stores.

**Either end is fatal for this content.** The graphics layer would be visible
between roughly half and three-quarters of each frame at 12fps, with the black
interval locked to frame rate -- a 12 Hz strobe over the whole picture, not a
tear or a partial band. And the packed layout has **no page left to flip to**:
both 256-colour pages carry picture, which is the entire point of it. There is
no version of the MAME branch where the packing is merely expensive.

### 48.4 px68k cannot testify about SCSI at all (bears on 43.2)
Checked while looking for a second opinion on single- vs dual-address. **px68k
does not emulate the MB89352.** `x68k/scsi.c` is 81 lines: it synthesises a
64-byte fake CZ-6BS1 boot ROM at `$EA0020` (the `Human68k` signature, the IOCS
`$F5` vector, `move.b d1,$e9f800`) and traps the IOCS call on the host. Its own
header says so -- `SCSI IOCS を特殊処理で対応。SPCはエミュレートしない`.

So the "second emulator" method that settled 46/47 **is not available for
43.2**, and never was. MAME models the dual-address row and has no DACK path;
px68k models no SPC. Item 2 needs the CZ-6BS1's `scsiexrom.bin` (8 KB, CRC
`7be488de`, absent here) disassembled for its DMAC DCR programming -- or a
schematic. It does not need another emulator.

**And the field to read is now pinned to the primary source.** MC68450
datasheet (Motorola ADI1216, Jul-89 printing), section 3.6.1 -- the DCR field
order is `XRM | DTYP | DPS | PCL`, MSB to LSB, and DTYP is the answer in one
two-bit field:

| DTYP | datasheet text, verbatim | addressing |
|---|---|---|
| `00` | `M68000 Compatible, Explicitly Addressed` | **dual** |
| `01` | `M6800 Compatible, Explicitly Addressed` | **dual** |
| `10` | `Device with ACK, Implicitly Addressed` | **single** |
| `11` | `Device with ACK and RDY, Implicitly Addressed` | **single** |

and 3.6.1.2 states the equivalence outright rather than leaving it to be
inferred:

> For M68000 type devices, the DMAC will use a **dual address transfer
> protocol** by running M68000 type bus cycles to transfer data to or from the
> device registers and a second bus cycle to complete the operand transfer from
> or to memory. [...] In the remaining two device protocols, the DMAC asserts
> the acknowledge signal to **implicitly address the device during a single
> address transfer** while it is explicitly addressing a memory location.

So 43.2's 5.0-vs-9.0 clocks/byte is decided by two bits in one byte the
CZ-6BS1's boot ROM writes at init. (Bit *positions* within DCR are the
conventional 7-6/5-4/3/2-0 split; the datasheet's own bit-number row did not
survive OCR, so treat the positions as unconfirmed and the field order and
encodings as quoted.)

**MAME confirms the negative half of this from the other side:**
`hd63450.cpp` contains **no DTYP handling at all** -- the only device-shape
field it decodes is `ocr & 0x30` (operand size). It cannot express an
implicitly-addressed device, which is why 43.2 was right that MAME settles
nothing here.

### 48.5 One thing the hunt did confirm independently
px68k's `kaiseki.txt` (the author's own analysis notes, 2014/2/14), on GVRAM
structure, unprompted and predating any of this:

    256色の場合は、Page0の(0,0), Page1の(0,0), Page0の(1,0), Page1の(1,0)... と交互に並ぶ。

Page 0 and page 1 bytes alternate within the word at the *same* coordinate.
That is 46.1's page-not-pixel finding from a third source, and it is the
premise the packed layout is built on. **The layout's premise is solid; only
its visibility is in doubt.**

## 49. The streaming path, built and run: contiguity is the constraint, and the shipping rate does not fit the pipe (session 18)

STATUS item 3 has been open since session 7, and 45.4.1 stated the gap in as
many words: **the gate proves the decoder is pixel-exact over a whole window and
says nothing about how the bytes get to it.** `tools/bench/decode.lua` preloads
5,261,814 B of container into emulated RAM and lets `a0` walk through all of it.
The shipping player never holds a window at once.

That rig is now built. `src/player/stream.s`, `tools/bench/prep_stream.py` and
`tools/bench/stream.lua` decode the gate container **out of a bounded ring**,
with a modelled SCSI pipe as the producer, and the container living in a HOST
file rather than in emulated RAM.

### 49.1 The result: pixel-exact from a ring one twentieth the size of the stream

| ring | machine | wraps | mean hole | result |
|---|---|---:|---:|---|
| 256 KB | **stock 2 MB** | 18 | 14.7 KB (5.7%) | **120/120, final frame pixel-exact** |
| 128 KB | stock 2 MB | 37 | 10.6 KB (8.3%) | 120/120, pixel-exact |
| 96 KB | stock 2 MB | 54 | 15.6 KB (16.2%) | 120/120, pixel-exact |
| 80 KB | stock 2 MB | 60 | 8.9 KB (11.2%) | 120/120, pixel-exact |
| 64 KB | stock 2 MB | 107 | 23.4 KB (36.6%) | 120/120, pixel-exact |
| 48 KB | stock 2 MB | 111 | 8.9 KB (18.5%) | 120/120, pixel-exact |

Verified by `tools/bench/verify_decode.py`, the same comparison that gates
`decode.s`: the last frame against `tools/encoder/dlx.py`'s reconstruction, and
because a SKIP block is a claim about the previous frame still being in GVRAM,
the last frame is only right if all 120 were.

**A side effect worth naming: the rig's RAM ceiling is gone.** FINDINGS 44.6.4
audited 37/120 frames because the container did not fit 2 MB, and 45 raised
`RIG_RAM` to 6 MB to fix it. The streaming rig holds ~256 KB of stream and
reads the rest from the host, so **a stock 2 MB machine runs the whole window** —
and the machine it runs on is now the machine the player targets, rather than a
rig-shaped one.

### 49.2 The constraint is CONTIGUITY, and a byte-counting simulation cannot see it
`09_buffer_sim.py` asked whether cumulative supply ever falls behind cumulative
demand, in bytes, and FINDINGS 21 answered "zero required prefill". That test is
necessary and not sufficient. The block loop and the span chain read the stream
with a monotonically increasing `a0` and **no bounds check anywhere** —
`move.l (a0)+,d0`, `lea MODEB(a0),a0`, eleven unrolled `movem.l (a0)+`, a
`move.b (a0)+` per block index. None of it survives an address that wraps
mid-record.

So the ring needs the **whole next record resident AND contiguous**, not merely
enough bytes by the deadline. Those are different conditions and only the
second one is a byte count. `tools/analysis/19_ring_stream.py` models the ring's
addresses rather than its occupancy.

### 49.3 `aligned` beats `split`, and it is not close
Two policies can give the reader a contiguous record. Both columns below are for
**`s14_d5_all1500`**, the shipping candidate, in a 256 KB ring — the costs scale
with the container's record sizes, so they must be quoted per container:

| policy | mechanism | RAM cost | CPU cost |
|---|---|---:|---:|
| **`aligned`** | producer refuses to start a record it cannot finish; leaves a hole, restarts at 0 | 23.4 KB mean hole = **9.1%** of the ring | **0** |
| `split` | records wrap; ring's first MAXREC bytes mirrored into a shadow past its end | 0 | **46,394 clk/frame = 5.57% of the frame budget, forever** |

For the lighter gate container `rc_fr_singe_scsi_span` the same trade is
**5.7% of the ring against 3.64% of the frame budget** — same direction, same
verdict, smaller numbers.

The decoder already spends **77.0% of the budget on the mean frame and 91.1% at
p90** (FINDINGS 45). `split` puts p90 at **96.7%**. RAM is the thing this machine
has 2 MB of; clocks are the thing it has none of.

`aligned` also needs a per-record **index** on the fill side — and a branching
laserdisc game needs one anyway to seek to a branch point. **The policy that
costs no clocks reuses a structure the player cannot avoid.**

The third option — teach the block loop to wrap its own reads — is the expensive
one, and not because of the branch. A bounds test lands *inside* the instruction
sequences FINDINGS 30.4 and 40 fitted their constants to, so it does not cost a
compare: it costs **every span and per-block figure in the tree being
re-measured**.

### 49.4 Two independent implementations agree exactly
The Python simulation predicts the ring's behaviour from record sizes alone; the
Lua producer drives a real 68000 through MAME. They agree to the digit, and at
two ring sizes rather than one -- so it is not a coincidence of a single tiling:

| ring | | wraps | mean hole | usable ring |
|---|---|---:|---:|---:|
| 256 KB | `19_ring_stream.py` (from record sizes) | 18 | 14.7 KB | 94.3% |
| 256 KB | `stream.lua` (driving the 68000) | **18** | **14.7 KB** | **94.3%** |
| 128 KB | `19_ring_stream.py` | 37 | 10.6 KB | 91.7% |
| 128 KB | `stream.lua` | **37** | **10.6 KB** | **91.7%** |

They share no code. This is the same class of check as FINDINGS 46's — agreement
on a *mechanism* rather than on an output.

### 49.5 The shipping candidate does not fit the 488 KB/s pipe, and nothing was checking
`s14_d5_all1500` is the session-14 candidate: **29.19 dB at 496.7 KB/s** (43.6).
The pipe constant this tree has simulated against since session 2 is
**488 KB/s**. Those two numbers have never been put side by side.

    wire demand 496.7 KB/s  -  pipe 488.0 KB/s  =  8.7 KB/s OVER, on the MEAN

This is **not a burst a ring absorbs**. The deficit grows 744 B per frame for as
long as the scene runs — 87 KB over the 120-frame window, **523 KB per minute of
play**. No ring size fixes a sustained overrun, and quoting the window's 118.4 KB
"required prefill" for it would be the most flattering possible way to state it.

**Why it was never caught.** 42.1 established that 488 was never a bus figure and
that the binding resource is *clocks*, not KB/s — so the rate controller was
built to bind on `decode + c*bytes` and has **no pipe term at all**. That was a
defensible decision. What was not decided is that FINDINGS 21's buffer sizing,
and its "zero required prefill", would keep standing on a constant the design had
stopped enforcing. Item 4 has been open since session 7 for exactly this reason.

**The useful output is a requirement on the medium, not a verdict.** Since 488 is
unmeasured folklore and the intent is to measure a BlueSCSI directly, the tool
reports the threshold to measure *against*:

| container | wire | **zero-prefill pipe** | vs 488 |
|---|---:|---:|---:|
| `s14_d5_all1500` (the candidate) | 496.7 KB/s | **513.2 KB/s** | +5% |
| `rc_fr_singe_scsi_span` (the gate) | 446.1 KB/s | **451.4 KB/s** | -8% |

**513.2 KB/s is now a hardware acceptance test**, and it is 33% of SCSI-1's
asynchronous rating and 10% of its synchronous one (42.1). It is very likely met;
it has never been shown to be met.

### 49.6 The rig measures ARRIVAL, and the first version of it measured the wrong thing
`stream.s` has no frame clock — it asks for the next record the instant it
finishes the last. So it outruns any finite pipe, and its spin counter reports
**91 of 120 frames "stalled" at a pipe the same run shows is fast enough**. A
shipping player waits for vblank and spends that same time idle. Reporting that
count as an underrun would have been a false finding of exactly the shape this
project keeps filing.

The rig now records the emulated time at which each record becomes **resident**
and checks it against a 12 fps deadline, which is a question about arrival alone
and does not need the decoder paced:

| pipe | decoder waited | **records late** | worst | **required prefill** |
|---|---:|---:|---:|---:|
| unlimited | 0/120 | **0/120** | — | 0 |
| 520 KB/s | 85/120 | **0/120** | — | 0 |
| 488 KB/s | 91/120 | **1/120** | 4.9 ms (0.06 fr) | 2.3 KB |
| 460 KB/s | 97/120 | **2/120** | 9.7 ms (0.12 fr) | 4.4 KB |

The 2.3 KB at 488 against the simulation's 0.0 KB is a modelling difference, not
a disagreement: the Lua producer delivers in **whole records**, the simulation in
**512-byte sectors**, and whole-record granularity is the more conservative of
the two by up to one record's worth of latency.

### 49.7 What this does NOT establish
1. **The DMAC's clock debit is not modelled.** The pipe here is a constant byte
   rate on the emulated clock. It is honest about *arrival order and residency*,
   which is what a ring manages, and says nothing about the clocks the DMAC
   steals from the 68000 while it delivers (43.2, and `W` is still undecided).
   **A zero-late result from this rig means "the bytes were in time", NOT "the
   frame fits".**
2. **Buffer stall-tolerance at a branch point is still untested.** Because the
   decoder free-runs, the ring never backs up, so the ring-size sweep in 49.1
   tests *wrap correctness* at each size and **not** the buffering that a seek
   needs. At 64 KB the mean hole is 36.6% and effective capacity is one record —
   it is single-buffered, and it passes anyway. Do not read 48 KB as a viable
   player buffer.
3. **The producer is not an MB89352.** No sector-level command overhead, no
   arbitration, no seek. `19_ring_stream.py` quantises to 512 B; the rig does not.
4. **The hole is a tiling effect and is not monotonic in ring size** — 96 KB
   wastes more than 80 KB does. It depends on how record sizes tile the ring, so
   a ring should be sized against the *measured* hole for the container it will
   carry, not against a fraction.
5. **An unexplained cross-emulator gap, left open rather than explained away.**
   The ring pass decodes the gate container at **561,532 cycles/frame under
   MAME**. FINDINGS 45's figure for the same container is **641,444 cycles/frame,
   and it is px68k's C68K core**, not MAME's -- so the two are not comparable and
   the 12% between them is not evidence of anything yet. Getting MAME's own
   full-pass number for this container needs a `decode.lua` timing run that did
   not complete inside 25 minutes on this host; it was killed rather than left to
   race another MAME job, which is how session 18 lost its first attempt at it.
   **No figure in this section rests on the comparison.** Whoever picks it up:
   run `decode.lua` on `rc_fr_singe_scsi_span.dlx` with nothing else touching
   `tmp/`, and compare its "full 120-frame pass" against 561,532. If they agree,
   the C68K/MAME delta is the thing to explain; if they do not, `stream.s`'s
   frame loop is.
6. **`decode.s` is unchanged, and provably.** The block loop and span chain were
   moved to `src/player/frame.i` and the constants to `geom.i` so both
   front-ends assemble from literally the same bytes; `decode.s` still assembles
   to the same **1,296 bytes** it did before the split, and `prep_dlx.py` still
   emits a byte-identical blob after the loader maths moved to
   `tools/bench/dlxload.py`. Both are asserted in `check.sh`.

## 50. The pipe constant is retired (session 18, USER DECISION)

**USER DECISION, after 49.5: remove the delivery-rate constant from the repo as
a live number.** 42.1 established in session 13 that it was never a bus figure —
a user-supplied "4 Mbps" with no recorded provenance, 10% of SCSI-1's
asynchronous rating — and 29.5 item 3 had carried "confirm the 4 Mbps figure" as
an open item since session 7. It was never confirmed. It was also never removed,
and 49.5 is what that cost: the shipping candidate ran 8.7 KB/s over it for five
sessions with nothing in the tree comparing the two.

### 50.1 What was actually wrong was the DEFAULT, not the number
The number being unmeasured was known and written down. What kept it load-bearing
was that **six tools defaulted to it** — `12_span_tradeoff.py`,
`14_dmac_chain.py`, `16_span_roundtrip.py`, `17_span_delivered.py`,
`19_ring_stream.py` and `tools/bench/stream.lua`. A default is how a figure gets
into a table without appearing in the sentence that reports the table. Every
span figure in FINDINGS 30–41 was scored against it; none of them had to say so.

**All six now take a REQUIRED argument with no fallback.** A tool that cannot run
without being told the rate cannot quietly assume one, and a result that had to
name its rate to exist is a result whose provenance travels with it.

A small confirmation of the same point fell out of doing it: writing the new
help text broke `--help` on four of the tools -- the text said "10%" and argparse
read it as a format spec -- and **nobody would have noticed**, because none of
these tools had ever been run with `--help` in this tree. The removal was the
first thing that made them state their own arguments out loud.

That is the transferable part: **an unmeasured constant is not made safe by
documenting that it is unmeasured.** 42.1 documented it perfectly and it went on
silently underwriting tables for five more sessions. It is made safe by deleting
the default.

### 50.2 What survives, and why it is not the same thing
`GATE_SPAN_KBPS` in `tools/bench/check.sh`. The gate container was **encoded**
with it, and every per-block and span constant in FINDINGS 41/43/45/49 is fitted
to that container. Changing it is a re-encode plus a re-measurement of all of
them, not an edit.

It is a **container recipe, not a delivery claim**, and check.sh says so at the
point of use. The distinction is the whole reason it can stay: nothing reads a
medium's throughput out of it.

### 50.3 What replaces it: a requirement, not a constant
`19_ring_stream.py` reports the **zero-prefill pipe** — the rate a medium must
clear for a given container to need no prefill at all:

| container | wire demand | **zero-prefill pipe** |
|---|---:|---:|
| `s14_d5_all1500` (the candidate) | 496.7 KB/s | **513.2 KB/s** |
| `rc_fr_singe_scsi_span` (the gate) | 446.1 KB/s | **451.4 KB/s** |

Its rate sweep is now anchored to each container's own wire demand (0.90x to
2.00x) rather than to a fixed list of absolute rates, so it privileges no
constant and stays meaningful for any container.

**This is a number to MEASURE A MEDIUM AGAINST, not one to design on**, which is
the difference that mattered. The BlueSCSI has never been benchmarked on this
machine and the intent has always been to measure it directly; it now has a
threshold to be measured against.

### 50.4 What this does NOT do
1. **It does not measure anything.** The delivery rate remains unknown. The
   tree is now honest about that rather than carrying a placeholder — which is
   a smaller claim than it sounds, and the right one.
2. **It does not re-derive the tables that were scored against the old figure.**
   FINDINGS 30–41's span figures stand as measured *at that rate*; what changed
   is that nothing new can be scored there without saying so. Anything that
   needs a delivery rate to mean something is now waiting on a measurement, and
   should be.
3. **It does not touch the gate container**, so the green light and every
   constant fitted to it are unmoved. `./tools/bench/check.sh` is **ALL GREEN**
   after the removal.

## 51. Pacing the decoder: seek slack is accumulated, not owned (session 19)

STATUS item 4, open since session 7 in one form or another and sharpened by
49.7.2. `tools/bench/stream.lua` decodes 120 frames out of a bounded ring and
the pass is pixel-exact at every ring size down to 48 KB — and that result could
not be read as a statement about buffering, because `src/player/stream.s` has no
frame clock. It asks for record *i* the instant it finishes record *i-1*, so it
outruns any finite pipe, the ring never backs up, and the producer's overlap
test is never the thing that refuses a placement. **A ring-size sweep under
those conditions tests wrap correctness at each size and nothing else.**

The rig now has a frame clock. `PACE`/`PACEON` (`$18034`/`$18038`) are written
by the producer — vblank or an MFP timer in the player — and frame *i* may not
start before tick *i*. `PACEON=0` leaves the loop free-running and is what the
green light's wrap gate still uses, so 49's figures are unmoved.

### 51.1 The ceiling: what a ring is worth once it is full
Every cell below is a full 120-frame decode on MAME's 68000, pixel-verified
against `tools/encoder/dlx.py`, on the gate container (`rc_fr_singe_scsi_span`,
446.1 KB/s wire, 36.5 KB mean record). "Ceiling" is the largest number of whole
records resident and unconsumed, i.e. **the frames the decoder could still draw
with delivery stopped dead**. Pipe `0` is unlimited, which isolates the ring's
own capacity from the rate.

| ring | unlimited | 460 KB/s | 488 KB/s | 520 KB/s | 600 KB/s |
|---:|---:|---:|---:|---:|---:|
| 64 KB | 2 | 2 | 2 | 2 | 2 |
| 96 KB | 3 | 3 | 3 | 3 | 3 |
| 128 KB | 5 | 4 | 4 | 4 | 4 |
| 192 KB | 6 | 4 | 5 | 5 | 5 |
| 256 KB | 8 | 4 | 7 | 7 | 7 |
| 384 KB | 11 | 4 | 10 | 11 | 11 |
| 512 KB | 15 | 4 | 11 | 14 | 14 |

**64 KB carries two frames and 96 KB carries three.** 49.7.2 warned that 48 KB
was single-buffered and passing anyway; this is the number, and it says the
small end of that sweep was measuring nothing about delivery.

### 51.2 Tolerance is `ceiling - 1`, and it was falsified rather than asserted
`DLX_CUT_AT`/`DLX_CUT_FR` stop the pipe dead at a chosen tick, as a seek does.
At 256 KB and 520 KB/s, with **7 records resident**:

| cut | underruns |
|---:|---:|
| 2 frame times | 0 |
| 6 | **0** |
| 7 | **1** |
| 8 | 1 |
| 10 | 1 |

**Seven resident records buy six frame times, not seven** — 500 ms, not 583.
The last one is spent covering the pipe's restart: a 36.5 KB record takes ~0.9
frame times to place at 512 KB/s of video, so the record due immediately after
the cut is still arriving when its slot opens. A design that reads the resident
count as its stall budget is over by one record, every time.

Every cut run stayed **pixel-exact**, including the ones that underran. That is
the expected shape and worth stating: under-delivery makes a frame LATE, not
wrong — `waitrec` spins and the decode is byte-identical when it resumes.
A rig that reported corruption here would be reporting its own bug.

### 51.3 The result that bears on a branching game
Slack is not a property the buffer has. It is **accumulated out of the surplus
between the pipe and the wire demand**, and a seek spends all of it.

| ring | pipe | ceiling | play needed to reach it, from empty |
|---:|---:|---:|---:|
| 256 KB | 488 KB/s | 7 fr (583 ms) | **4.83 s** |
| 256 KB | 520 KB/s | 7 fr | 2.83 s |
| 256 KB | 600 KB/s | 7 fr | 1.67 s |
| 512 KB | 520 KB/s | 14 fr (1.17 s) | **8.42 s** |
| 512 KB | 600 KB/s | 14 fr | 8.42 s |

**A bigger ring raises the ceiling and lengthens the climb to it.** The fill
rate is `pipe - wire`, which is set by the encoder and the medium; the ring only
sets where the climb stops. So the question a branch point asks is not "is the
buffer big enough" but "has there been enough play since the last branch point
to refill it" — and at 488 KB/s with a 256 KB ring the answer is **4.83 seconds
of play**. Two branch decisions closer together than that and the second one has
no buffer to spend, at any ring size. Dragon's Lair's decision points are
seconds apart.

This is the first statement in this tree about back-to-back branches, and it is
a consequence of the delivery model, not of the decoder.

### 51.4 Which resource is binding, said out loud
The producer now counts its refusals separately. A **rate** refusal (no credit
for a whole record) means a bigger ring buys nothing; a **ring** refusal (the
decoder still owns those bytes) means a faster pipe buys nothing. From the
decoder's side the two are identical — "no new record" — and they have opposite
fixes.

**At 460 KB/s every ring from 192 KB to 512 KB reports RATE-BOUND with a ceiling
of 4 and never fills inside 120 frames.** 460 is 13.9 KB/s over the container's
446.1 wire demand; that surplus fills 146 KB in the whole 10-second window. Any
ring larger than that is dead RAM in this scene. The zero-prefill pipe for this
container is 451.4 (49.5) — **clearing the arrival deadline and being able to
absorb a seek are different requirements, and the gap between them is large.**

### 51.5 An independent implementation agrees, within one record
`tools/analysis/20_seek_slack.py` is the same model written from record sizes in
Python, sharing no code with the Lua producer — the 49.4 pattern. Over all 35
cells of the grid:

- **35/35 of the rig's ceilings fall inside the sim's bracket**, and 33/35 sit
  at the top of it.

The bracket is one record wide and is reported as a range rather than a number,
deliberately. At these rates the pipe delivers almost exactly one record per
frame slot, so "records resident at slot *i*" differs by one depending on
whether the sample is taken before or after that slot's delivery. Sampled after,
the sim matched the rig's ceiling in 33/35 cells; sampled before, it was exactly
one low in 33/35. Picking the sampling point that matched, and then reporting
the match as a cross-check, would have been fitting the model to the
measurement. Both are returned and the caller prints the range.

### 51.6 Two rig defects the pacing exposed
Both were in the producer, both were invisible while the decoder free-ran, and
both would have made the first paced result wrong in a plausible direction.

1. **The `RD_PTR` cross-check was really a test of how often `reap()` ran.** It
   asserted, for every record it retired, that the decoder's released-to pointer
   equalled that record's end. `RD_PTR` is a single pointer and names the end of
   record `tail-1`; retiring several records in one pass — normal the moment the
   decoder is paced and the pipe stops — made it fire a false MISMATCH on the
   earlier ones. It now asserts on `tail-1` only, which is the invariant that
   actually holds.
2. **`reap()` was skipped for the duration of a cut.** The cut returned early
   from `produce()`, so the ring looked full for the whole seek and the producer
   could not restart against space the decoder had long since released. A seek
   stops delivery; it does not stop the decoder. Only credit and placement stop
   now.

### 51.7 What this does NOT establish
1. **The pipe is still a model and the medium is still unmeasured.** Every rate
   in 51.1 is a chosen input, not a measurement — FINDINGS 50 stands, and
   `pace_run.sh` requires the rate for the same reason. The columns are a
   sensitivity table; none of them is a claim about a BlueSCSI.
2. **The DMAC's clock debit is still not modelled** (49.7.1). A paced decoder
   makes the ring's behaviour honest and does nothing about the clocks the DMAC
   steals while it fills. "Survives a 500 ms cut" means the bytes were there,
   not that the frames fit.
3. **One container, one scene.** The ceilings are in whole records, so they move
   with record size; a scene with heavier frames has a lower ceiling in the same
   ring. Nothing here is a universal per-KB figure and the tools take the
   container as an argument for that reason.
4. **The pace gate costs the rig a `tst.l`/`beq.s` per frame** — `stream.s` is
   1,418 bytes against 1,396. It is outside `src/player/frame.i`, so every
   per-block and span constant in FINDINGS 24/30/40/41 is untouched, and
   `decode.bin` is still 1,296 bytes at the same MD5 (asserted in `check.sh`).
5. **Seek TIME itself is not modelled.** The cut is a chosen duration. What a
   real seek costs on the target medium is part of the same unmeasured
   question as the rate, and it is the other half of what item 1 buys.

---

## 52. The DMAC configuration was never a mystery: it is in the IPL ROM (session 20)

ROADMAP called the ADPCM stream "the largest unpriced risk left in the project"
and asked for one cheap thing first — **put the audio DMA on the bus and see
what it does to the 86.7%.** Doing that needs a clocks-per-byte figure for the
audio channel, and the tree did not have one: `11_cpu_budget.py` charged audio
bytes `--dma-clocks-per-byte`, the *disk's* rate, defaulting to 5 and described
in its own help text as "single-address, bus held, no drive wait". That is a
description of the SCSI channel, and it is the favourable end of ROADMAP B3, an
open question worth 242 KB/s. **Audio was being charged the disk's guess.**

It did not have to be a guess for either of them. The X68000's IPL ROM programs
all four HD63450 channels itself, and **the ROM is on this machine** — MAME
boots the player rig with `-bios ipl10`. `tools/analysis/21_iplrom_dmac.py`
reads the configuration out of the image and decodes the MC68450 register
fields. It is a gate, not a report: every value is (address, expected bytes,
meaning), eight sites, and a mismatch or an unrecognised ROM revision exits
non-zero rather than decoding some other code. It is in `check.sh`, needs no
emulator, and runs in milliseconds.

**NAME THE LAYER.** This is not a measurement of a running machine and not real
hardware. It is the shipping ROM image (IPL 1.0, md5 `7fd4caab…`, 131,072 B),
read statically — evidence about what Sharp's engineers configured this board
to do, from the vendor, for these exact devices. Field layouts are SOURCED from
MC68450, Motorola, Jul 1989, the document `buscost.py` already cites.

### 52.1 What the ROM programs

Boot, `$FF0CCA`–`$FF0C58`: a ten-pair table at `$FF0D8E` initialises channels 0
and 1, then two inline runs do channels 2 and 3.

| ch | device | DAR | DCR | decoded |
|---|---|---|---|---|
| 0 | FDC | `$E94003` | `$80` | dual address, 8-bit port, cycle steal **without hold** |
| 1 | **SASI** | `$E96001` | `$80` | dual address, 8-bit port, cycle steal without hold |
| 2 | IOCS `_DMAMOVE` | per call | `$08` | dual address, **16-bit** port, burst |
| 3 | **ADPCM** | `$E92003` | `$80` | dual address, 8-bit port, cycle steal without hold |

Per transfer, `$FF9A82` (ADPCM play) and `$FF9944` (SASI): **OCR = `$32`** for
memory→device, `$B2` for device→memory. Both decode to `SIZE = 11` (byte),
`CHAIN = 00` (none) and — the load-bearing field — **`REQG = 10`, external
request: one operand per device request.**

### 52.2 Audio is dual-address and cannot hold the bus. 16..19 clocks a byte.
`DTYP = 00` is *explicitly addressed*, so every ADPCM byte is a memory read
followed by a device write: 4 + 5 = **9 clocks** (Fig 4-25 sheet 4, note 2 —
already in `buscost.py` for the span work). `XRM = 10` is cycle steal without
hold and `REQG = 10` is external request, so **the DMAC arbitrates for the bus
once per byte and hands it straight back.** There is no burst to amortise the
front-end (5..8 clocks, §4.5.2.1) and back-end (2, §4.5.2.2) over. The audio
byte costs **16 clocks best case, 19 worst** — not 5.

### 52.3 The byte rate, derived rather than restated
`ratectl.AUDIO_KBPS = 7.8` had no derivation next to it, and ROADMAP flagged it
as exactly the kind of figure that cost the project a 2x error in FINDINGS 43.
It survives, with a correction of units: 15.6 kHz is the MSM6258V's 8 MHz clock
÷512 = **15,625 samples/s**, 4 bits each, two to a byte = **7,812.5 B/s**. The
7.8 is that in *decimal* kB; `11_cpu_budget.py` was multiplying it by 1024, so
it read 2.4% high. Harmless, and now derived from the sample rate in
`buscost.ADPCM_BYTES_PER_S` instead of typed in.

**The request count does not halve.** 7,812.5 B/s is 7,812.5 DMA requests/s,
because the port is 8 bits and the operand is a byte. That is the FINDINGS 43
trap in the other stream, and it does not spring: nobody had denominated audio
per word.

### 52.4 So: what the audio does to the bus. Almost nothing.
651.0 B/frame at 12 fps × 16..19 clocks = **10,417..12,370 clocks of 833,333 —
1.25% to 1.48% of the frame.** The decoder's measured mean is 68.5% of the frame
period on the gate container, so audio takes about **4% of what the decoder
leaves**, and about 1.7% of it on the worst frame (which is already at 110.8%
and misses with or without audio).

**P6's bus risk does not materialise.** The concern was sound and the answer is
that a second DMA consumer at 7.8 kB/s is not what a bus at 88% occupancy is
short of. The debit was 3.2x..3.8x understated, and it is still small.

### 52.5 THE ONE THAT MOVES SOMETHING: the disk channel is programmed the same
ch1, SASI, `DCR = $80`, `OCR = $B2` — **dual address, 8-bit port, cycle steal
without hold, external request.** Byte by byte, full arbitration each time. ch0
(FDC) too. Sharp programs every explicitly-addressed 8-bit device on this board
identically, and by 52.2's arithmetic that is **16..19 clocks per delivered
byte**.

**A CORRECTION TO THIS SECTION AS FIRST WRITTEN, made in the same session.**
It cited 42.4's sensitivity table — `W <= 6` fits 0/120 frames, `W = 8` misses
47/120 — as though those figures were in clocks per BYTE. **They are per WORD,
and FINDINGS 43 voided them**: 43 is the section that caught `W` being charged
per word to a byte-wide port, and it says in terms that 42.3's 0/120 was never
physically reachable. Quoting them here would have re-imported the exact 2x unit
error 43 exists to have corrected, one section after using the same trap as a
warning. They are struck, and nothing below depends on them.

In the corrected unit the ladder is a per-byte cost of the DMAC's own
configuration, and it is the ladder `buscost.py` already carries:

| configuration | clk/byte |
|---|---:|
| single address, bus held | 5 |
| dual address, bus held | 9 |
| single address, arbitrated per byte | 12 |
| **dual address, arbitrated per byte — what the ROM programs** | **16..19** |

`15_bus_occupancy.py` sweeps it on the gate container (37,403 B/frame, measured
mean decode 570,958 clocks):

| W clk/B | video clk/frame | % of frame | CPU + audio + video |
|---:|---:|---:|---:|
| 5 | 187,017 | 22.4% | 92.2% |
| 8 | 299,228 | 35.9% | 105.7% |
| 12 | 448,842 | 53.9% | 123.6% |
| **16** | 598,455 | 71.8% | **141.6%** |
| **19** | 710,666 | 85.3% | **155.0%** |

**This table is the statement, and it is not corroborated by 42.4.** The
resemblance between the `W = 8` row here and 42.4's 47/120 is a coincidence of
two different units on two different containers at two different rates, and
calling it a cross-check — as this section did when first written — was
manufacturing agreement out of a unit error.

**This does not close B3.** `scsiexrom.bin` drives an MB89352, not the SASI
port, and a different ROM may configure it differently. What changed is the
prior and the framing: 42.6 says the handshake "is ours to choose, not to
receive", and that is still true — but **nothing in this tree has shown a
cheaper configuration is reachable for an explicitly-addressed 8-bit port, and
the vendor's own answer is the expensive one.** Holding the bus, which is what
separates 9 from 16..19, is a *requirement on the player's DMAC programming*
rather than a range the hardware hands us. It is now the largest open number in
the project, ahead of the rate.

### 52.6 Audio outranks the disk at the arbiter
CPR: FDC 0, **ADPCM 1**, SASI 2, `_DMAMOVE` 3 — lower is higher priority. With
the ROM's arrangement, when both channels want the bus in the same slot ADPCM is
served first. An audio byte is never the thing that waits; **a video byte is.**
Relevant to 51's underrun analysis, which models delivery as a smooth rate.

### 52.7 What this does NOT establish
1. **Static read of a ROM image, not a running machine.** No emulator executed
   this code for the purpose; the claim is about bytes in the shipping image.
   Real hardware would confirm the registers, not the timings.
2. **The timings are datasheet, not measured.** 9 clocks for the transfer and
   5..8 / 2 for the arbitration come from MC68450 Fig 4-25 and §4.5.2. They are
   the same source `buscost.py` already rests on for the span work, and they
   have never been checked against a board.
3. **IPL 1.0 is a pre-SCSI machine.** ch1 is SASI. B3 stands.
4. **Our player is not obliged to copy the ROM.** It programs these registers
   itself. 52.5 is a prior and a warning, not a measured ceiling — and the
   experiment that would settle it is P4, not another reading.
5. **Nothing here is an audio implementation.** P6's other risks — extraction,
   encode, container interleave, the second stream's effect on `wire` and hence
   on 51.3's refill climb — are untouched. Only the bus question is answered.
6. **The frame-period accounting assumes the DMAC does not overlap the CPU**
   (`buscost.DMA_OVERLAPS = False`), which is FINDINGS 35's premise: no cache,
   a two-word prefetch queue. A stolen bus cycle is a stopped 68000.

---

## 53. The loader moves onto the 68000, and a scene change finally has a price (session 21)

ROADMAP P1 and P2. Since session 1 the two load-time transforms have been done
**host-side**, in `tools/bench/dlxload.py`, with the rigs pushing the *result*
into emulated RAM: the codebooks expanded to word-per-pixel form (CB1 to 32 B an
entry, CB4 to 8 B) and the 24-bit palette packed to `GGGGGRRRRRBBBBBI` with the
shared LSB chosen per entry. That was the right call while the inner loop was
what was being measured — charging a once-per-scene cost to the per-frame path
would have flattered or damned it for no reason — but **a player has no host.**

`src/player/load.i` does both on the 68000, out of the raw container header as
it comes off the disc. `tools/bench/loadgate.s` is its front-end, the way
`decode.s` is `frame.i`'s.

**NAME THE LAYER.** Everything here is **emulated**: MAME 0.277 `x68000`,
`-bios ipl10`, stock 10 MHz / 2 MB, cross-checked on px68k's C68K core. Nothing
has run on real hardware.

### 53.1 It reproduces dlxload.py exactly, on both cores

`dlxload.py` stays the reference — what changed is **where the transforms run,
not what they produce** — so the gate is byte-for-byte, not "close enough":

- **CB1 8,192 B, CB4 2,048 B, palette 512 B: identical.** A wrong codebook byte
  is a wrong colour in every block that uses that codeword, in every frame of
  the scene, and a wrong shared LSB is a *slightly* wrong colour, which is
  exactly the sort of defect that gets attributed to the codec.
- **The palette half is read back out of the palette registers at `$E82000`**,
  not out of a RAM shadow, so "the words reached the hardware" is part of what
  passes.
- **The darkest-entry index agrees too** (255 on the gate container). It comes
  out of an `argmin` whose tie-break has to match numpy's — first index at the
  minimum wins — and it is what the letterbox is filled with.
- **Both CPU cores produced the same 10,752 bytes**, and the same as the host.

`tools/bench/load_run.sh` runs it and `check.sh` gates it.

### 53.2 What it costs, measured on two cores

| stage | MAME clocks | C68K clocks | Δ | data bus (C68K) |
|---|---|---|---|---|
| scratch tables (boot only) | 52,919 | 61,622 | +16.4% | 6.5% |
| **P1** codebook expansion | 92,609 | 95,304 | +2.9% | **43.2%** |
| **P2** palette entries | 97,019 | 97,348 | +0.4% | 14.3% |
| BOOT: all three | 246,957 | 253,614 | +2.7% | 23.2% |
| **SCENE CHANGE: P1 + P2** | **189,627** | 192,322 | +1.4% | 28.6% |

**A scene change costs 18.96 ms of 68000 time — 22.8% of one 12 fps frame.**
Boot costs 24.70 ms. Bus occupancy is data accesses only (C68K does not see
prefetch), so it is a lower bound; the expansion is the bus-heaviest thing here
because it is a pure copy, and it still runs alone.

**The stages are exactly additive on the exact core.** `P1 + P2 - SCENE = 330`
clocks, and `tables + P1 + P2 - 2x330 = 253,614 = BOOT`, to the clock — 330 is
the front-end's own per-pass overhead. On MAME the same identity closes to 1.8%,
which is one tick of its host clock over the 0.99 s run. Two instruments,
two granularities, one arithmetic. (That tick was written here as 1/55.46 s and
is **1/56.69 s** — MAME's raster, not the hardware's, 54.5. 17.64 ms over 990 ms
is 1.78%, so the sentence was right and the label was wrong.)

### 53.3 The scratch tables are scene-independent, so they are not in the scene path

Packing a palette entry needs the squared error of both choices of the shared
LSB, per channel. That is three table reads and a sign test here, out of three
tables — the 6-bit-to-8-bit rendering the CRTC performs, its square, and the
per-channel error difference — and **not one of them describes the scene.** They
describe the machine. `pal_tables` is therefore a separate entry point from
`pal_pack`, built once at boot: **5.29 ms saved on every scene change**, 22% of
what a naive port of `dlxload.py` would have charged per scene.

### 53.4 The two cores disagree only where the multiplies are, and C68K is wrong in kind

The table build is the only code in this tree that multiplies, and it is the
only stage where the two cores disagree by more than 3%. **px68k's C68K charges
a flat 50 clocks for `MULU` and `MULS`** regardless of the operand
(`c68kmacro.h:1869/1883`, `RET(50 + EA_CLOCKS_...)`); the 68000 charges
**38 + 2n**, n counting bits in the source. For the 576 multiplies this code
executes, the real total is 24,192 clocks against C68K's 28,800: **the flat rate
explains 4,608 of the 8,703 clock gap, and 4,095 clocks — 7.7% of the stage —
are NOT explained.** Recorded as open rather than rounded away; the residual is
somewhere else in the two cycle tables and this stage is not worth the hunt.

**The consequence is general and belongs in the reader's head:** where a future
measurement contains multiplies, C68K over-charges them, and it is the second
opinion this tree leans on for every cycle figure. Nothing else in
`src/player/` multiplies — index scaling is `lsl.w #5`/`#3` by construction —
so no figure in FINDINGS 24-52 is affected.

### 53.5 Where the cost actually lands: the scene change, priced

`tools/analysis/22_scene_load.py`, cycle counts parsed out of the rig's own log
rather than pasted in as constants. Three costs in three units, and **the third
is the one that compounds**:

- **BYTES.** The header region is **5,920 B** (palette 768 + CB1 4,096 + CB4
  1,024 + 32) and it must arrive before frame 0 can be decoded. It is not part
  of any frame record, so **no rate table in this tree has ever counted it.**
- **CLOCKS.** 189,627, from 53.2.
- **ACCUMULATED SLACK.** Those bytes are bytes the pipe did not spend filling
  the ring, so they cost play-time at the surplus rate `pipe - wire` — the
  currency FINDINGS 51.3 established a branch point spends.

| pipe KB/s | header ms | + load ms | total | frame slots | surplus KB/s | slack cost |
|---|---|---|---|---|---|---|
| 451.4 | 12.81 | 18.96 | 31.77 | 0.38 | 5.3 | **1.099 s** |
| 488 | 11.85 | 18.96 | 30.81 | 0.37 | 41.9 | 0.138 s |
| 513.2 | 11.27 | 18.96 | 30.23 | 0.36 | 67.1 | 0.086 s |
| 600 | 9.64 | 18.96 | 28.60 | 0.34 | 153.9 | 0.038 s |

(Rates are explicit arguments with no default, FINDINGS 50. `wire` is 446.1
KB/s on the gate container, audio included.)

**Two readings, and the second is the finding.** First: the whole fixed cost of
a scene change is **about a third of one frame slot** — it is not what makes a
branch point expensive, the seek and the refill climb are. Second: **the slack
cost is hypersensitive to the rate**, because it is divided by a surplus that
goes to zero. At 488 KB/s the header lengthens the climb by 138 ms; at 451.4
KB/s — the *arrival-deadline* rate for this same container, 49.5 — the same
5,920 bytes cost **1.1 seconds of play**. The header is cheap only where the
pipe already has room, which is the same place everything else in this project
is cheap.

### 53.6 The alternative that was not taken

The encoder could ship the codebooks pre-expanded and P1 would not exist. That
trades **9.26 ms of 68000 time for 5,120 more bytes in every scene header** —
10.5 ms of pipe at 488 KB/s, and 5,120 bytes that lengthen the climb again by
the arithmetic above. **Derived, not measured**, from the two figures either
side of it. It is close to a wash in milliseconds and it is not a wash in
*kind*: the CPU is idle during a seek and the pipe is the resource this project
is short of. The transform stays on the 68000.

### 53.7 What is still open in P2

**The encoder still does not reserve a black entry** (23.4), so the letterbox
gets the palette's closest thing to black — index 255 here — rather than a true
black with `I = 0`. That half of P2 is encoder-side, it changes the container,
and it moves every constant fitted to the gate container, so it is a re-encode
plus a re-measurement rather than an edit. `load.i` is ready for it: it reads
whatever the palette section holds and reports the darkest index either way.

---

## 54. The frame clock moves onto the 68000, and the 12 fps frame turns out never to have existed (session 22)

ROADMAP P3, and the item was phrased "needs MFP timer or VBL" — which quietly
assumes one of those can do it. Neither can, and finding out why produced a
better clock than either and a correction to an instrument the whole tree reads.

`src/player/clock.i` is the clock; `src/player/clockgate.s` and
`tools/bench/clock.lua` measure it; `tools/analysis/23_frame_clock.py`
enumerates the space it was chosen from and prices its cadence. Two new stages
in `tools/bench/check.sh` gate it.

**Layer: MAME 0.277's emulated X68000, not real hardware.** The MFP, the CRTC
and the interrupt sequence are all the emulator's. Where the emulator and the
registers disagree — and they do, 54.5 — the code is built on the registers.

### 54.1 No MFP timer can tick at 12 Hz, and none can tick as slowly as a frame

The MC68901's timer clock on this board is 16 MHz / 4 = 4 MHz
(`sharp/x68k.cpp:1027-1028`), its prescaler ladder is `{4, 10, 16, 50, 64, 100,
200}` (`machine/mc68901.cpp:173`) and its data register is 8 bits. So:

* the **slowest** tick a single timer can produce is 4e6/(200·256) =
  **78.125 Hz**, which is 6.5× faster than a 12 fps frame — a software divider
  is required whatever the source;
* **4e6/12 = 333,333.33 is not an integer**, so no prescale/data pair divides to
  12 Hz at all. `23_frame_clock.py` walks all 7 × 256 of them and finds zero.

A timer clock is therefore not "the simple option". It is a divider *plus* an
interrupt rate 3.6× higher than the raster's, at an arbitrary phase against the
scan.

### 54.2 The raster cannot do it by whole division either — and the fix is exact

V-DISP is on MFP GPIP4 (`x68k.cpp:1139`), and the same pin is Timer A's event
input (`mc68901.cpp:167`, `GPIO_TIMER = {GPIP_4, GPIP_3}`); its interrupt is
channel 6, `IR_GPIP_4 = $40` (`mc68901.cpp:76`). The raster is 31,500/568 =
**55.4577 Hz** exactly. Every whole divide misses:

| Timer A event count | fps | error |
|---:|---:|---:|
| 4 | 13.8644 | +15.54% |
| 5 | 11.0915 | −7.57% |

12 fps needs **4.6215 refreshes per frame**. So the divider keeps a remainder:

```
each V-DISP:  acc += fps*VTOTAL          ; 12*568 = 6816
              if acc >= 31500: acc -= 31500 ; PACE += 1
```

Long-run rate is `fps·VTOTAL/VTOTAL` = **12.000000 fps exactly**, with a
remainder that never accumulates. Both constants are **read out of the CRTC at
init** — `R04+1` for VTOTAL, `R20` bit 4 checked for the 31.5 kHz mode — so the
clock is derived from the registers that generate the raster it counts, and the
two cannot drift apart. The accumulator peaks at 38,316, so it is 16-bit
arithmetic on a 68000; `clk_init` refuses rather than overflow (the ceiling is
fps < 59.9 at this VTOTAL).

**Measured over 3,000 refreshes: 3,000 interrupts, 649 ticks, where 649.1429
were exactly due — an error of −0.14 ticks, i.e. the remainder still held.** The
gate is stated in ticks and not in ppm on purpose: a remainder-keeping divider
is off by at most one tick over *any* window, so quoting ppm would let a longer
window advertise a tighter clock for nothing.

### 54.3 It costs 181.35 clocks per V-DISP — 838 per frame, 0.10% of the budget

The host cannot time this: MAME's Lua sees the machine once per screen frame,
17.64 ms, and the interrupt costs microseconds. So the **68000 times it
itself**. `clockgate.s` runs a one-instruction loop for a window of 3,000
refreshes with the clock off and again with it armed:

```
clock off:  iters0·L            = clocks in the window   ->  L
clock on:   iters1·L + ints·H   = clocks in the window   ->  H
```

`L` is **calibrated, not looked up** — the point is to price the clock on the
machine rather than against `buscost.py`, which is the table being checked.

| | |
|---|---:|
| loop iteration, calibrated over 13,926,121 of them | **38.000002 clocks** |
| per V-DISP interrupt, over 3,000 | **181.35 clocks** |
| per 12 fps frame (4.6215 interrupts) | **838 clocks = 0.1006%** |

`L` landing on a whole number to seven digits is the check that licenses the
subtraction, and it is also an independent confirmation of `buscost.py`'s model:
`addq.l #1,(xxx).L` is 3 instruction words + 4 data accesses = 7 bus cycles = 28
clocks, plus 10 for the `bra.s`.

**The 181.35 decomposes exactly.** By the same model the handler body is 130
clocks on a V-DISP that emits no tick and 164 on one that does; over the measured
649/3,000 mix that is 137.355, leaving **43.99 clocks for the interrupt exception
sequence** — the textbook 44, measured here rather than recalled.

For comparison, the cheapest exact MFP-timer clock would interrupt 16.7 times a
frame instead of 4.6: **3.6× the cost, for a tick with no fixed relationship to
the scan.**

### 54.4 THE ONE THAT MOVES SOMETHING: there is no 83.33 ms frame, and there never was

12 fps on a 55.4577 Hz raster is 4.6215 refreshes, so a frame is shown for **4
refreshes (72.13 ms) or 5 (90.16 ms)** — 37.9% of them short. The 833,333-clock
budget every figure in this project is priced against is the **mean** slot, and
the short slot is **13.4% under it**.

With the per-frame decode costs (`tmp/c68k_frames.csv`, 120 frames of the gate
container) run through the actual divider and the actual pace gate:

| tick source | short slot | frames over it | no idle left |
|---|---:|---:|---:|
| nominal 1/fps model (no raster has it) | 833,333 | 1/120 | **1/120** |
| the host tick, as `stream.lua` really emits it | 705,590 | 10/120 | **4/120** |
| the 68000's clock, hardware raster | 721,270 | 10/120 | **4/120** |
| the 68000's clock, MAME's raster | 705,590 | 10/120 | **4/120** |

**The cadence was already there and nothing had named it.** `stream.lua`'s tick
is `floor((t - t_rel) * fps)` — which *looks* uniform and is not, because Lua
only sees the machine at frame boundaries, so its ticks land on refreshes and its
gaps are the same two whole numbers. Every host-paced result in FINDINGS 49 and
51 already carried a 4/5 cadence. **P3 did not introduce it. It moved who
produces it onto the machine and made it visible.**

**A short slot is not a dropped frame.** The pace gate says only "not before
tick i", so a frame that overruns spends the next frame's idle and the clock
recovers itself; the cost is one frame presented a refresh late. What the table
counts is frames with no idle left, and the difference between the nominal row
and the raster rows — **1 against 4** — is the entire price of the cadence on
this container.

**The expensive frame is frame 0, at 923,146 clocks = 111% of the nominal
budget**: the first frame of a scene has nothing to SKIP against, so it is the
whole picture in one slot. Most of what follows it in those counts is that
transient draining. It also means the cost lands **at a scene change**, next to
FINDINGS 53.2's 18.96 ms of loader and the seek — not spread over the window.

`src/player/stream.s` now counts this itself (`LATEFR`/`LATEMAX`/`LATE1ST`), and
the rig's count matches the offline model **exactly**: 4/120, first at frame 1,
on both tick sources. The counter sits ahead of the wait loop and the
free-running path executes none of it, so FINDINGS 49's figures are untouched.

### 54.5 MAME's raster runs 2.22% fast, and the whole tree has been sampling it

`x68k_crtc.cpp refresh_mode()` computes the frame period as
`(scr.max_x * scr.max_y)` dots over the dot clock, with
`scr.max_x = m_htotal - 8` — one character cell short, and an **inclusive
rectangle bound used as a count**. In the 256-wide mode that is 360 where the
registers say 368, so MAME's refresh is fast by **368/360 = 1.02222**:

* registers: 31,500/568 = **55.4577 Hz**
* MAME, measured by `clock.lua` over 3,000 frames: **56.6901 Hz**

The two agree to six digits with `clock_69m()/6 / (360·568)`, so this is the
mechanism and not a coincidence. Consequences, and the third one is why it is
worth this much space:

1. **Every "1/55.46 s granularity" note in this tree was wrong** — it is
   1/56.69 s, 17.64 ms. Corrected in `decode.lua`, `load.lua`, `span.lua`,
   `blit.lua`, `loadgate.s` and `check.sh`, with the derivation put once in
   `crtc_mode.lua`. No conclusion changes: 53.2's "one tick over the 0.99 s run"
   is 1.78% at the corrected figure and was quoted as 1.8%.
2. **68000 cycle figures are untouched.** The CPU clock is 40 MHz/4 and has
   nothing to do with the screen. Nothing in FINDINGS 24–53 moves.
3. **A raster-paced player runs 2.22% fast under MAME**, so the rig measures
   12.267 fps where the hardware would give 12.000. `clock.lua` reports both and
   de-skews, and `clock_run.sh` prices the interrupt against the **hardware**
   refresh count — charging the player the emulator's extra interrupts would
   overstate the cost by that same 2.2%.

**Do not "fix" 55.4577 to match the measurement.** It is the hardware's, derived
from the dot clocks, and it is what the divider is built on.

### 54.6 What had to be turned off, and why it is in the file

The rigs launch the 68000 at `SR=$2700` into a machine the IPL ROM has already
booted, so the MFP arrives with whatever IOCS enabled on it and vectors pointing
into IOCS. Lowering the mask without disarming it would vector into code we did
not put there. `clk_init` writes `IERA = IERB = 0` first — which on the MC68901
clears the matching pending bits with them (`mc68901.cpp REGISTER_IERA/B`,
`m_ipr &= m_ier`) — then arms GPIP4 alone, takes the falling edge (AER bit 4
clear: the **start of vertical blanking**, which is when a player would present),
and drops to `SR=$2500`. Levels 1–5 stay masked, so the DMAC (IRQ3) and the SCC
(IRQ5) cannot get in. `VR` is written with **S clear**, so an acknowledge clears
the pending bit by itself and the handler needs no end-of-interrupt write.

The handler saves only the **low word** of `d0`, because every operation in it is
a word operation — which is legal precisely because `clk_init` proved the
accumulator fits 16 bits. `decode.s` and `frame.i` were checked for stack tricks
before the mask was lowered: the only `a7` use in either is one `move.l a1,-(sp)`
pair, so an interrupt cannot corrupt decoder state. The 120-frame self-paced
decode being pixel-exact is the test of that, and it is gated.

---

## 55. The 68000 fills its own ring, and the player's request loop costs more than the medium does (session 23)

ROADMAP P5, the last M2 item this tree could build. FINDINGS 49 and 51 measured
a ring that a HOST filled: `tools/bench/stream.lua` held the record index, chose
where every record went, wrote the descriptor and advertised it. The 68000 only
consumed. That is the same shape session 21 found in the loader and session 22
in the frame clock — a policy living outside the machine that has to run inside
it — and it was the last one in the delivery path.

`src/player/ring.i` is that policy on the 68000: `aligned` placement, the
descriptor ring, a prefill, an accumulated-slack rule and a seek. The rig keeps
only what is genuinely not the CPU's — a transport that answers one request at a
time at a modelled rate, which is what an SPC and one DMAC channel are.

### 55.1 The container had to change: DLX4 carries a record index

`aligned` asks whether the NEXT record fits before the end of the ring, which is
a question about a record's length asked **before it is fetched**. Every reader
in this tree learned record boundaries by **walking** the frame stream — reading
each record's length word to find the next — and that is exactly what a player
streaming off a disc cannot do: the length word of record *i+1* is one of the
bytes it has not fetched. A branch point needs the same table a second time, to
seek to record *j* without reading what lies between.

DLX4 adds `nframes` u16 longword-counts to the scene header, ahead of the frame
stream. Costs, measured on the gate container:

| | DLX3 | DLX4 |
|---|---:|---:|
| scene header | 5,920 B | **6,164 B** (+240 index, +4 header) |
| frame payloads | — | **byte-identical**, all 120 |

The payloads being byte-identical is asserted rather than assumed: the same
encode was written both ways and compared record for record, so **no constant
fitted to the gate container moves**. `dlx.py` cross-checks the index against
its own walk of the stream and refuses a container where they disagree, and
`prep_stream.py` checks it again against the disk image it lays out. Lengths
rather than offsets: 2 bytes a frame instead of 4, and the disc offsets are a
running sum the player builds once at scene load (`ROFF`, 4 B/record of RAM).

In 53.5's currency the 244 bytes are small — 0.5 ms of pipe at 488 KB/s — but
they are on the same side of the ledger as the 5,920 that section priced, and
the scene header is now **6,164 B that must arrive before frame 0**.

### 55.2 It reproduces the host producer's tiling exactly

Third independent implementation of `aligned`, on the gate container in a 256 KB
ring:

| producer | wraps | mean hole | pixel-exact |
|---|---:|---:|:--:|
| `19_ring_stream.py` (Python, from record sizes) | 18 | 14.7 KB | — |
| `stream.lua` (host, driving the 68000) | 18 | 14.7 KB | yes |
| **`ring.i` (the 68000 itself)** | **18** | **14.7 KB** | **yes** |

The host now **audits** rather than produces: every placement the machine makes
is checked against the host's own index and its own list of records the decoder
has not consumed, and the run is refused on the first disagreement. That is what
makes the pixel-exact result a statement about `ring.i` and not about a new rig.

### 55.3 THE ONE THAT MOVES SOMETHING: the channel is idle whenever the player is not asking

A channel only moves bytes while it has a request, and only the CPU can give it
one. Between the completion of record *i* and the issue of record *i+1* the disc
**stands still**, and the length of that gap is a property of the player's loop,
not of the medium. No host-filled run could see it — the host producer placed
records whenever it liked — so **no rate table in this tree contains it**.

Measured on the machine, same container, same 256 KB ring, same 488 KB/s, the
only difference being how many requests the player may have outstanding:

| queue | channel idle | gaps | underruns | slack ceiling | mean slack | bound by |
|---:|---:|---:|---:|---:|---:|---|
| **1 request** | **669.0 ms, 6.8%** | 119 | **59/120** | 2 | 1.0 | rate |
| **2 requests** | **317.5 ms, 3.4%** | 9 | **0/120** | 5 | 3.5 | ring |

The surplus this container has over the wire at 488 KB/s is 8.7% of the pipe,
and a one-deep request loop spends 6.8% of it on nothing. **That is most of the
surplus 51.3's lookahead is accumulated out of**, which is why the same ring at
the same rate goes from rate-bound with a ceiling of 2 to ring-bound with a
ceiling of 5 on a change with no bytes in it at all.

A second queued slot costs the 68000 nothing per frame and is available on the
hardware: the HD63450 has four channels and the IPL programs all of them (52.1).

### 55.4 Prefill is the weaker lever, and now there is a number for it

Prefill in whole records, at 488 KB/s in a 256 KB ring, every cell pixel-exact:

| prefill | 1 | 2 | 3 | 4 | 6 |
|---|---:|---:|---:|---:|---:|
| underruns, 1-deep queue | 66 | 59 | 49 | 47 | 24 |
| underruns, 2-deep queue | 1 | **0** | **0** | **0** | **0** |

**A prefill buys a one-off cushion that a rate-bound pipe spends immediately; a
queued request buys the rate back every frame.** Six records of prefill is half
a second of black screen at the start of every scene and still leaves 24
underruns; a second slot leaves none for nothing. The policy `ring_prefill`
implements is therefore small — 2 records — and the reason it is not 1 is 51.2:
*n* resident records buy *n-1* frame times, so releasing at 1 starts a scene
with a stall budget of zero.

### 55.5 The slack rule is in the player now, and so is a seek

`ring_may_seek` answers 51.2's rule as arithmetic the player can run — "resident
minus one, against the frames this branch will cost" — instead of a line in a
rig's log. `ring_seek` takes a record number, waits the channel quiet (an
outstanding transfer is bytes already on their way to an address about to be
declared free), takes the disc address out of the index, and empties the ring.

Rehearsed as a second pass over the same scene: **240 records placed, the seek
at 12.87 s, the ring refilled from empty, 0 underruns after it, and the final
frame of the second pass pixel-exact**. The seek's cost shows up exactly where
55.3 says it would — as the worst channel gap of the run, **397.5 ms** — and
that is the disc idle, not a mechanical seek, which is still unmodelled (51.7.5).

### 55.6 An independent model, and where it does and does not agree

`tools/analysis/24_ring_owner.py` is the same producer written from record
sizes and per-frame decode costs, sharing no code with the rig — the 49.4/51.5
arrangement. It reads the DLX4 index the machine reads, and it reproduces 54.4's
4-or-5-refresh cadence rather than averaging it away.

| 488 KB/s | rig Q=1 | model Q=1 | rig Q=2 | model Q=2 |
|---|---:|---:|---:|---:|
| channel idle | 6.8% | 8.8% | 3.4% | 5.3% |
| slack ceiling | 2 | 3 | 5 | 6 |
| mean slack | 1.0 | 1.1 | 3.5 | 4.2 |
| underruns | 59/120 | 11/120 | 0/120 | 0/120 |

The model runs **one record ahead** of the rig, which is the same one-record
bracket 51.5 recorded and reported rather than tuned away. The underrun count at
Q=1 is the one number that disagrees badly, and it is a threshold statistic on a
quantity sitting at 1: with a mean slack of one record, whether each individual
frame's record lands before or after its tick is decided by details neither model
has. **The agreement that matters is the resource statement** — a one-deep queue
loses 7-9% of the pipe and two-thirds of the lookahead — and on that they agree.

The model's mean decode cost, 561,126 clk/frame, lands within 0.07% of the
561,532 the ring pass measured under MAME (49.7.5), from the encoder's own
constants.

### 55.7 Three bugs and one instrument correction, recorded because they were all silent

1. **The reader's wrap rule was not the writer's.** Stepping the read cursor
   past record *i* lands on the end of record *i*, which is where record *i+1*
   went only if it FITTED there. Using the wrong record's length left the cursor
   inside the hole, and one more retirement pushed it past the end of the ring
   and wrapped it to an address unrelated to any record. The live span computed
   from that is *shorter* than the truth, so the producer places over a record
   the decoder has not read. Symptom: a bitstream desync, not a fault.
2. **The free-space test decided the wrap before it knew the shape.** When the
   LIVE span is the one that wraps, the ring base is not free and `aligned` may
   not restart there. Deciding from `WCUR + len > SZ` alone overwrote live
   records. Same symptom.
3. **The queue was gated on completion instead of retirement.** A slot stays in
   use until the descriptor has been read out of it, which happens one poll after
   the ack at the earliest. Gating on the ack let the CPU overwrite a slot whose
   descriptor had not been published; `DESC` for that frame stayed zero and the
   decoder decoded address zero. This one only exists at a queue depth above 1,
   and it is why the two-deep result took three attempts to obtain.
4. **The rig was capturing a torn screen.** MAME renders a screen line by line
   and the machine-frame notifier fires at the END of that frame, so a bitmap for
   a frame in which GVRAM changed holds lines from before and after the change.
   Snapshotting it captures a tear, which reads as a pixel-exactness failure in
   the bottom blocks plus a broken double-scan pairing. It only bites when the
   decoder finishes its last frame late in a screen frame, so it appeared for the
   first time in a run with underruns. The rig now waits one whole frame before
   the capture. **No previously reported result is affected** — every one of them
   finished its last frame with idle to spare — but the check.sh gates would have
   been flaky under any future run that did not.

An instrument note, not a bug: under the self-clock the host's "records late"
report grades arrivals against the tick times it OBSERVED, which are up to
17.64 ms late (54.5), so it understates lateness — 6 records late where the
68000 itself counted 59 frames that had to wait. The decoder's own stall counter
is the sharp instrument. Host-paced runs take their deadlines from a host model
and are exact, so 49.6's table is unaffected.

### 55.8 What this does NOT establish

1. **The transport is still a model.** It delivers at a chosen byte rate with an
   exact clock; it is not an MB89352. No command overhead, no arbitration, no
   sector granularity, no mechanical seek. `W` — the clocks the DMAC steals per
   delivered byte — is still undecided and still unmeasurable here (P4, 52.5).
   **A zero-underrun result means the bytes were in time, not that the frames
   fit.**
2. **The rates are chosen inputs.** FINDINGS 50 stands: every column is a
   sensitivity, not a claim about a BlueSCSI.
3. **One container, one scene, one ring size.** The ceilings are in whole
   records and move with record size (51.7.3).
4. **The seek is a rewind, not a branch.** It exercises the machinery — quiet
   the channel, empty the ring, address record *j* out of the index, refill —
   against a container that has one scene in it. What the worst gap between two
   real decision points is still needs the scene graph (ROADMAP G1).
5. **`decode.s` and `frame.i` are unchanged** and `decode.bin` is still 1,296 B
   at the same MD5. `stream.s` grew to 2,814 B: the ring producer, plus a
   two-instruction test at the top of the pace wait that routes a self-filled
   run into a polling wait loop. The legacy wait loops are byte for byte the ones
   FINDINGS 51 measured and a host-filled run executes none of the new code.

---

# Findings — session 24 (2026-08-24)

## 56. The scene graph is in, and the worst gap between two decision points is zero (session 24)

ROADMAP G1, and it was scheduled early *because it is a measurement input*.
FINDINGS 51.3 established that a ring's lookahead is accumulated out of
`pipe - wire` and that a seek spends all of it, so what a branch point costs is
set by the rate and by **the time since the last branch**. 55.5 rehearsed a seek
on the machine and then said out loud that it could not ask the question that
matters, because nothing in this tree knew where the branch points *are*.

Now it does, in two files with a hard line between them (USER DECISION,
session 24):

- **`tools/import/scenegraph.py` is the only file in this tree that knows
  anything about somebody else's source.** Their file layout, table names,
  timing formulas and magic constants are wired into it and nowhere else. It
  writes **`DLXSCENE1`**, this project's own schema — a clip's length, its exits
  and the earliest instant each of them can fire — into gitignored `tmp/`.
- **`tools/analysis/25_scene_graph.py` reads only DLXSCENE1** and could not name
  an outside project if it wanted to.

Nothing is vendored and nothing outside-derived is committed. That line is worth
drawing before the game-logic layer exists rather than after: when one of those
projects moves, exactly one file in this tree breaks, and when a scene table is
eventually committed rather than regenerated, there is one place the attribution
already lives. Restructuring changed no number in this section — the split was
made after the measurement and the whole output was re-run byte for byte.

### 56.1 What was imported, and what gates it

**40 scenes, 516 sequences, 906 input windows**, plus `scene_manager.rows` — the
13x3 scene order the arcade walks. **282 of the 516 sequences (54.7%) are
entered by a seek**; the rest play on from wherever the disc already is, which
is the distinction the whole finding rests on.

The source table is Lua, and there is no Lua interpreter on this box, so the
importer contains a **deliberately small Lua-subset parser**: table constructors,
literals, bare identifiers, the file's four timing helpers and `+`/`-` between
them. Anything else is a parse error rather than a silent skip. Three gates
stand behind that choice:

1. the four timing helpers are **matched against the text that defines them** —
   `frame / 23.976`, the `- 6297.0` ROM offset, `noseek` returning `-1`,
   `(seconds * 1000) + ms`. If upstream changes a formula, the tool stops
   rather than keeps evaluating the old one.
2. the parse must reach **516 sequences and 906 input windows** exactly. A
   parser that quietly dropped a branch would produce a *smaller* graph and a
   *longer* worst gap, i.e. it would fail in the flattering direction.
3. `check.sh` runs the import and then the analysis, and **skips rather than
   fails** when there is no checkout, like every other outside-this-repo input
   in the tree.

### 56.2 CORRECTION to FINDINGS 16: there is only one transcription

> 16 cleared two permissively licensed transcriptions and planned to **diff them
> against each other to catch transcription errors**. That plan does not work.

The SNES project's own `data/events/README.md` states its 516 chapter XMLs are
"**derived from DirkSimple game data**". They are a *conversion* of the same
transcription, not a second one. The diff below is still worth running — it
catches conversion errors — but it **cannot** catch a transcription error,
because there is nothing independent to compare against. DirkSimple is the
single source, and its own provenance is the arcade ROM's data table.

That correction was cheap to make and it was one sentence of a README away from
never being made at all. It belongs with FINDINGS 42.1: a plausible source with
no provenance is folklore, and so is a plausible cross-check.

### 56.3 THE MEASUREMENT: the worst gap is zero, and 5.4% of branches are

Chaining play across non-seeking sequences and taking the **earliest** moment an
input window opens (the least play a clip can deliver before the branch it leads
to), over 612 distinct transitions into a seek, excluding attract mode:

| | seconds of play |
|---|---:|
| worst | **0.000** |
| p10 | 0.950 |
| p25 | 1.966 |
| median | 3.473 |
| p75 | 5.800 |
| p90 | 9.548 |
| best | 82.497 |

**33 of the 612 (5.4%) are zero**: an input window that opens at t=0 of a clip
the disc *seeked to*, so two seeks can fall back to back with no play between
them at all. `flaming_ropes.enter_room -> fall_to_death` is one — press right on
the frame the clip starts and the player dies immediately.

This is not an edge case to be designed around; it is the game. **A rule of the
form "has there been enough play since the last branch" — 51.2's slack rule,
`ring_may_seek` in `src/player/ring.i` — can be answered NO by the content,
not by the buffer**, and no amount of ring is a defence.

**203 of the 612 end the scene**, which in this design is also a container
change and needs 6,164 header bytes before frame 0 (53, 55.1). The worst
scene-change gap is **0.541 s** and the median is 2.501 s.

### 56.4 The median branch point arrives before the ring has refilled

51.3's climb, against the game's own gap distribution. Gate container
(`rc_fr_singe_scsi_span.dlx`, mean record 36.5 KB, wire 446.1 KB/s); rates are
explicit arguments and every one of them is a sensitivity, not a claim:

| ring KB | pipe KB/s | ceiling | climb s | branch points under the climb |
|---:|---:|---:|---:|---:|
| 256 | 451.4 | 3 | 20.83 | 601/612 (98%) |
| 256 | 488.0 | 7 | 6.11 | 468/612 (76%) |
| 256 | 513.2 | 7 | 3.81 | 370/612 (60%) |
| 256 | 600.0 | 7 | 1.66 | 129/612 (21%) |
| 512 | 488.0 | 11 | 9.60 | 551/612 (90%) |
| 512 | 513.2 | 14 | 7.63 | 512/612 (84%) |
| 512 | 600.0 | 14 | 3.32 | 301/612 (49%) |

Two things fall out, and the second is the one that costs something.

1. **At every rate this tree has considered, most branch points arrive with less
   lookahead than the one before them.** At 488 KB/s in a 256 KB ring — the
   configuration `check.sh` gates — that is 76%.
2. **A bigger ring makes this metric worse, and now content says so too.** 51.3
   derived it from the surplus alone; here the same rate goes from 76% under the
   climb at 256 KB to 90% at 512 KB, because doubling the ring doubles the
   ceiling without touching `pipe - wire`. **The ring is not the lever. The
   surplus is.**

### 56.5 What a branch actually costs when the gap bought nothing

The climb is what a player needs to *tolerate* the next branch. What it *pays*
at one is the prefill, because the ring is empty after a seek and 55.4's shipped
policy releases the decoder at 2 records:

| pipe KB/s | 2-record prefill | as a scene change (+6,164 B) |
|---:|---:|---:|
| 451.4 | 161.8 ms (1.94 frame slots) | 175.2 ms (2.10) |
| 488.0 | 149.7 ms (1.80) | 162.0 ms (1.94) |

So a zero-play branch is **not** a failure: it costs about two frame slots of
black, every time. What it removes is margin. A player that branches at p10
(0.950 s) has spent its whole lookahead and rebuilt almost none of it, and the
next slow record has nothing behind it. **The finding is not "this breaks", it
is "this design runs permanently at minimum lookahead, and the arcade content is
what puts it there."** 22_scene_load.py prices the scene-change case properly,
clocks included; the mechanical seek is still unmodelled (B1) and is charged on
top of all of it.

### 56.6 What the cross-check IS worth, now that it is not a cross-check

Run anyway, against 518 SNES chapter XMLs, with the 40 scene abbreviations
matched to DirkSimple scenes **from the data** — the abbreviation's letters must
be a subsequence of the scene name, ranked by sequence-name overlap, with a
reversed-scene rule for the thirteen mirrored scenes. (Overlap alone mapped
`snkr` to `black_knight`, because two scenes full of `seqN` names look alike.)

- **Start times do not compare at all.** The SNES XMLs are on their own
  extraction's timeline; DirkSimple is on arcade ROM frames minus 6,297 ms. The
  difference is not a constant and **does not even keep its sign** (spread
  -8.0 s .. +6.4 s). Reported as a spread rather than as a check, because a
  check it is not.
- **Durations do compare** — they are offset-invariant. 388/505 agree within one
  laserdisc frame (76.8%), median difference 0 ms.
- **Branch structure compares**: 470/505 chapters (93.1%) carry the identical
  set of (input -> target) edges. Of the 35 that differ, **16 are renames**
  (`captured_by_ghouls` -> `ghoul_capture`) and **18 of the remaining 19 are the
  SNES conversion dropping the arcade's diagonals**. The 19th is
  `intr_castle_exterior`, where the SNES *added* a skip.

**Zero transcription discrepancies were found, and none could have been.** What
the diff produced is one useful fact about our own input layer, below.

### 56.7 Two constraints on the input layer, from the same import

1. **The arcade uses eight directions plus action and start.** Counted over the
   906 windows: left 233, right 217, up 209, down 152, action 72, **upleft 13,
   upright 4, downleft 3, downright 1**, start 2. The diagonals are 21 windows
   out of 906 — rare enough to be dropped by a port that had to (the SNES one
   did) and **not** droppable by one aiming at the arcade.
2. **The shortest input window is 98 ms.** Median 950 ms (11.4 frame slots), p10
   393 ms, but the floor is 98 ms — and by 54.4 a 12 fps frame slot is 72.13 ms
   or 90.16 ms, never 83.33. **A 98 ms window is one or two frames wide.**
   Polling input on the frame tick is therefore marginal by construction: the
   input layer has to run off something faster than the frame clock, and
   `src/player/clock.i` already owns an MFP interrupt at 181.35 clocks a
   V-DISP (54.2) that is 8.6x faster and costs 0.1% of the budget.

### 56.8 What this does NOT establish

1. **No rate here is measured.** Every column is a sensitivity across explicit
   rates (FINDINGS 50). B1 is still open and the mechanical seek still has no
   figure at all.
2. **The gap model is a lower bound by construction.** It takes the earliest
   instant an input window opens, so it is what an *expert* player can force,
   not what a typical one produces. That is the right bound for a buffer
   design and the wrong one for describing play.
3. **It is the arcade's graph, not this port's.** The 612 transitions assume
   the port reproduces every branch. Nothing has been mapped onto our 224
   Blu-ray streams yet — the SNES project's 516 chapters are finer-grained than
   our streams, and that mapping is still C1's problem.
4. **Nothing ran on the 68000 this session.** This is host-side analysis of an
   imported table. `decode.s`, `stream.s`, `ring.i`, `clock.i` and `load.i` are
   untouched, `decode.bin` is still 1,296 B at the same MD5, and the green light
   was ALL GREEN before and after.
5. **The scene graph is not vendored, and the coupling is contained.** Neither
   repo ships here and neither is redistributable from this tree; both are
   permissive (DirkSimple zlib, Ryan C. Gordon; SNES project MIT, Chad
   Doebelin) and both are cloned by the reader. The `sources` block of every
   generated table carries the attribution. **`tmp/scenegraph.json` is
   generated, gitignored and derived data**: committing it, or any table built
   from it, is redistribution and the attribution has to travel with it.

---

## FINDINGS 57 — the 68000 reads the disc itself, and P4 was never blocked

Session 25. ROADMAP P4, first half. Green light ALL GREEN before and after.
**Emulated** — MAME 0.277, `x68000 -exp1 cz6bs1`. No real hardware.

### 57.1 The blocker was a missing FILE, not a missing MODEL, and the tree already knew
Session 21 recorded P4 as "blocked in this tree", re-checked rather than
assumed, on three grounds. One of them is wrong:

> there is still no `scsiexrom.bin` anywhere on this machine ... **MAME's
> `x68000` has no MB89352 path**, and `hd63450.cpp` decodes no DTYP.

MAME 0.277's `x68000` **does** have one. `-listslots` offers `cz6bs1` on `exp1`
and `exp2`; `-listdevices x68000 -exp1 cz6bs1` shows a *Fujitsu MB89352 SCSI
controller @ 5.00 MHz* on a SCSI bus with a hard disk at ID 0, alongside the
HD63450. **FINDINGS 32.4 had already established this in session 9** — the
CZ-6BS1's DMA glue, `$EA0000`, the data register at `$EA0015` — and 42.5 built
on it in session 14. The session-21 note is a regression in the record, not a
discovery.

What is genuinely missing is only the 8 KB `scsiexrom.bin` (CRC `7be488de`),
which MAME **requires** to instantiate the card: without it the machine refuses
to start at all. **That is the entire blocker, and it is not one**, because the
player drives the SPC registers directly and never executes that ROM — which was
already the plan in `docs/BENCHMARK.md` item 4, written in session 2, long
before the file turned out to be absent. `tools/bench/scsi_run.sh` supplies a
zero-filled placeholder on its own rompath, leaves the user's romset untouched,
and lets MAME print WRONG CHECKSUMS as it should.

**The substitution is honest here and would not be everywhere.** Anything that
boots from the card, or calls SCSI IOCS, *does* execute that ROM. Do not reuse
the rompath for those. **B3 is untouched**: it wants the ROM's bytes
disassembled for the DCR it writes, and a blank one has none.

### 57.2 The register map, measured rather than inferred
32.4 quoted one address. `src/player/scsigate.s` probes `$EA0000..$EA003F` one
address at a time, with a bus-error handler that records the fault, steps the
index and re-enters the loop — so a hole costs an entry in the map rather than
the rest of the run. **60 of 64 addresses answer.**

| | |
|---|---|
| registers | odd bytes, `$EA0001 + 2n`, `n = 0..14` |
| `$EA0007` (n=3, TMOD) | **BUS ERROR** |
| `$EA001F` (n=15, EXBF) | **BUS ERROR** |
| `$EA0017` (n=11, TEMP) | wrote `$A5`, read back `$A5` |
| `$EA0015` (n=10, DREG) | as 32.4 said |

The two holes are exactly the two registers the **MB89352 omits and the MB87030
has**, which independently confirms which part MAME is modelling. It also
**corrects the device's own documentation**: the summary of `mb87030.cpp` says
the MB89351/352 "skip TMOD and EXBF, shifting subsequent indices accordingly",
and the machine says MAME leaves *holes* and shifts nothing — which is what
keeps DREG at index 10 and at `$EA0015`. The bytes win. The first version of
this probe walked upward with `move.b (a0)+`, took a bus error at `$EA0006`, and
knew one address was dead and nothing about the other 57; **a sequential dump
reports the first hole as the answer**.

### 57.3 The data register is DMA-only on this card, and a PIO write vanishes
`x68k_scsiext.cpp` installs its own handler on `$EA0015` **and on no other
address**:

    write:  if (exown()) { if (!drq) dtack_w(1); else dma_w(data); }
            else         dreg_w(data);

On this machine `exown()` — the HD63450's OWN, fed back to the slot by
`x68k.cpp` — is asserted where a PIO write needs it not to be. The `else` arm is
unreachable, and **a byte written to `$EA0015` with the SPC in PROGRAM transfer
mode is discarded silently**: no error bit, no status change, no interrupt.
Quieting all four DMAC channels (`CCR = 0`, `CSR = $FF`) does not change it.

It was **measured, not reasoned about** — the gate writes `$5A` to `$EA0015` and
reads it straight back, and gets `$00` with the FIFO still empty — because ten
command bytes vanishing without trace looks exactly like a target refusing a
command, and that is how it first presented.

So every transfer issues `SCMD` **without** the PROGRAM bit, which puts the SPC
in DMA mode and makes it raise DRQ, and the CPU then moves the bytes through
`$EA0015` itself, in via `dma_w` and out via `dma_r`. **The CPU stands in for
the DMAC, through the DMAC's own door.**

**What that costs the argument, stated because it is easy to overclaim.** With
`exown` asserted at idle, MAME **cannot distinguish a CPU-driven byte at
`$EA0015` from a DMAC-driven one**. This rig therefore demonstrates the DATA
PATH and cannot, on its own, demonstrate that the HD63450 is the thing driving
it — which is precisely what ROADMAP calls P4's first job. Whether a real
CZ-6BS1 also refuses PIO here is **not settled**: it is a property of MAME's
model and it wants a board.

### 57.4 The result
`src/player/scsi.i`, 68000 code, no IOCS and no host in the transfer path:
selects the target, and issues **READ(10)** twice.

    READ(10) OK: 4096 B from LBA 0    match the host's image byte for byte
    READ(10) OK: 2048 B from LBA 1000 match too

The second one is the half that matters: **a driver that emits a malformed LBA
field still passes LBA 0**, because zero is what a malformed field usually is.

The volume is `tmp/stream_disk.bin` — the *same* file `prep_stream.py` already
writes for the ring rig — so the SCSI volume and the host-file pipe carry
byte-identical bytes, and a difference between the two rigs cannot be a
difference in what they are reading.

### 57.5 Five bugs, and four of them were silent
Recorded because the pattern is the finding: **nothing in a SCSI bring-up tells
you what you did wrong.** Every one of these presented as a phase that never
arrived.

1. **`sc_settc` wrote the wrong three bytes.** Three chained `rol.l #8` put the
   original bits 31..24, 23..16 and 15..8 into TCH/TCM/TCL, so a count of 10
   loaded a transfer counter of **zero**. MAME completed the TRANSFER instantly
   and silently, and the bus sat in command phase. Now written low-byte-first
   with `lsr`. The same trap was live in the CDB's block-count field.
2. **A byte handed to a FIFO is not a byte on the bus.** The driver returned
   from the command phase with the last byte still in the SPC, asked what phase
   the bus was in, and got COMMAND — which reads as a target refusing the
   command. Fixed by waiting for `XFER IN PROGRESS` to clear.
3. **A fixed phase sequence is wrong.** The first version ran select → command →
   data → status → message; the target came up in MESSAGE OUT with ATN asserted
   and the driver called it an unexpected phase. **The bus decides the order.**
   `scsi_read` is now a phase loop, which is both shorter and correct.
4. **The discarded PIO write** of 57.3.
5. **The initiator must let go of the bus, in two steps.** After the final
   message byte the SPC still holds ACK — `PSNS` reads `$4F`, REQ low and ACK
   high — and a target cannot drop BSY into that. It needs `SCMD` reset-ACK/REQ
   **and then** bus release. **This one only appeared once there were two
   reads**: one read passed byte-exact and every conclusion drawn from it was
   sound, and the second could not select. A player issues one command per
   record, so the failure would have been universal in the ring and invisible in
   the demonstration.

### 57.6 What this does and does not move
**Does not move `W`.** Not by one clock. MAME's device models are functional,
not transfer-timing accurate (`docs/BENCHMARK.md`), and 42.5 reads its DMAC
configured in wall-clock attotimes rather than per-operand cycles. `W` remains
the project's largest open number and still wants a board.

**Does not finish P4.** What is done is the correctness half — BENCHMARK's Tier
1, "does our read path work at all". What is left is the half ROADMAP calls
P4's first job: **a DMAC configuration that holds the bus**, and then the driver
behind `ring.i`'s `XF_*` mailbox in place of `stream.lua`'s modelled transport,
gated on the same pixel-exact 120 frames. 57.3 is a warning about the first of
those: this apparatus cannot tell a DMAC-driven byte from a CPU-driven one at
`$EA0015`, so "the DMAC held the bus" will need evidence that does not come from
watching that address.

**Does move the premise of every delivery rig in the tree.** Until now the
bytes came from a host. They now come off a disc, on the machine's own
instructions, byte-exact at two different LBAs.

---

## FINDINGS 58 — the player runs off the disc, and PIO costs 87 clocks a byte (session 25b/26)

**Emulated.** MAME 0.277, `x68000 -exp1 cz6bs1 -ramsize 2M`, a blank
`scsiexrom.bin` on a private rompath (57.1's substitution, unchanged). No real
hardware ran. `./tools/bench/check.sh` was ALL GREEN before this and ALL GREEN
after, with two new stages.

**ROADMAP P4b is DONE. P4a is not, and 58.2 is why it is now the item that
decides the project rather than one of two that do.**

### 58.1 The seam closed: 120 pixel-exact frames, off a real volume

`src/player/xfer.i` sits behind `src/player/ring.i`'s `XF_*` mailbox in place of
`tools/bench/stream.lua`'s modelled transport. `XF_GO` is answered by a real
READ(10) to a real MB89352 and `XF_ACK` is a word the 68000 bumps when the bytes
have landed — not one a host synthesises from emulated time.

| | |
|---|---|
| records fetched by the 68000 | **120**, one READ(10) each |
| bytes into the ring | **4,488,588**, and the decode is **pixel-exact** |
| bytes off the disc | **4,548,608** — see 58.3 |
| ring | 256 KB, **18 wraps, 14.7 KB mean hole** |
| a real mid-stream seek | **pass 2 pixel-exact**, ring thrown away and rebuilt |

**The 18 wraps are the load-bearing assertion, not the byte count.** They are
the same 18 the host producer produced in 49.4 and the same 18 `ring.i`
produced against a modelled transport in 55.4 — a *third* transport, same
tiling. `ring.i` is not supposed to be able to tell which side of the mailbox
answered it, and this is the number that says it could not.

**The change above the seam is two `bsr`s.** One in `ring_poll`, one in
`ring_seek`'s quiet-wait — and the second is not optional. With the transport
*inside* the machine, the only thing that can retire an outstanding request is
that wait loop itself, so a seek issued with a request in flight spins forever
without it. A host transport retired it on its own time. That is exactly the
kind of difference the seam exists to hide, and it is the one it could not.

### 58.2 What it costs: 87.28 clocks per delivered byte, and the number is portable

`tools/bench/xfer_cost.sh` decodes the same 120 frames twice — same ring, same
`stream.s`, same `ring.i` placing every record — and changes only which side of
the mailbox answers:

| | emulated | per frame |
|---|---|---|
| decode + `ring_poll` alone | 6.7737 s | **67.7%** of a 12 fps frame |
| ...with the real transport | 45.9516 s | **459.5%** |
| **the transport** | **391,779,000 clk** | **391.8%** |

**= 87.28 clocks per delivered byte**, 86.13 per byte off the FIFO.

**AND IT IS NOT MAME'S NUMBER, WHICH IS THE HALF THAT MATTERS.** The keep loop
in `src/player/scsi.i`, priced against the 68000's own cycle table — 12 patience
reload, 16 SSTS read, 10 `btst`, 10 branch, 20 DREG read to `(a1)+`, 8 `subq`,
10 branch — is **86 clocks**, and the FIFO also carries the dropped window bytes
of 58.3, which makes it **87.15 per delivered byte**. Measured 87.28. **0.2%
apart.** So the cost is the instruction stream and not a wait on MAME's SPC
model: it is a figure a real board would also pay, and it is the first number
this rig has produced that survives leaving the emulator. The residual, +0.13
clk/B = 4,989 clocks per record, is the per-*command* cost — select, CDB,
status, message, `xf_service` — and it is the part that does not scale with the
record.

**Against the ladder, in the same units** (clocks charged to the CPU per
delivered byte, at this container's 37,405 B mean record):

| | | share of a 12 fps frame |
|---|---|---|
| `W` = 5 | single address, bus HELD | 22.4% |
| `W` = 9 | dual address, held | 40.4% |
| `W` = 12 | single address, arbitrated | 53.9% |
| `W` = 19 | dual address, arbitrated — the IPL ROM's own disk channel (52.5) | 85.3% |
| **PIO 87** | **this rig, measured** | **391.8%** |

**The PIO transport is 4.6x the worst DMA configuration this project has found
and 17.5x the best.** P4a is not an optimisation of this. It is the difference
between a player and a slideshow, and it is now the *only* thing between the
tree and M2.

**The player's own clock says the same thing, independently.** Self-paced off
V-DISP, the machine decoded 120 frames in **560 slots** of a 12 fps clock:
**2.57 fps**. That agrees with 12 / 4.595 = 2.61 from the cycle accounting
above, from a completely different instrument.

**AND "UNDERRUNS: 0/120" IS VACUOUS IN THIS RUN.** A synchronous transport
cannot underrun by construction — a frame cannot start before its record has
landed, because the decoder *is* the transport. The counter that means anything
here is `NO IDLE`: **119 of 120 frames found their slot already open, worst
overrun 441 whole ticks.** `tools/bench/stream.lua` now prints that argument
next to the zero rather than leaving the zero to be quoted. This is the same
class of error as 49.7.2's free-running ring passing at 48 KB: a rig
configuration in which the failure it tests for cannot occur.

**The resource that binds also flipped, and it is worth naming.** Against a
modelled 488 KB/s pipe this container was rate-bound and the ring never filled
(55.4). Here the ring **fills — 90 refusals for space** — while the decoder
starves. Not of bytes: of *time*. Every previous delivery result in this tree
was measured on a rig where the transport cost the CPU nothing.

### 58.3 A record is not a sector, and the cheapest fix is a re-encode

`ring.i` asks for a byte offset and a length, both 4-byte aligned (28.3);
a target answers in 512 B blocks. **On the gate container 117 of 120 records
start part way into a sector.** This is not a rounding nuisance: the bytes on
either side of a record belong to *other* records the decoder may still be
reading, and the block loop walks `a0` with no bounds check (49.2), so a
transport that reads whole sectors straight into the ring **corrupts its
neighbours** — wrong pixels, not a fault.

`tools/analysis/26_sector_align.py` prices the three ways out:

| | wire | clocks |
|---|---|---|
| **A. windowed PIO** — read the covering sectors, store only the record | **+1.34%** | 86/B on every byte off the FIFO, and **a DMAC cannot do it at all** |
| **B. bounce buffer** — DMA whole sectors elsewhere, then copy | +1.34% | **+5/B on every delivered byte** = 22.4% of the frame, on top of `W` |
| **C. sector-aligned records** — pad to 512 in the container | **+0.43%** | **zero** |

A is what shipped in `scsi.i` and what 58.1 ran, and it is free *only* because
the CPU is already touching every byte — the property that disappears the moment
P4a succeeds. B is the cost `aligned` was chosen over `split` to avoid (49.3)
arriving by a different door, and on every byte instead of on a wrap.

**C wins on both axes**: it is cheaper on the wire than A and B by 0.91 points
of the payload (40,940 B on this scene), and it is the only one of the three a
DMA channel can run without a copy. What it costs is a **container revision** —
a re-encode plus a re-measurement of every constant fitted to the gate
container. That is the class of change ROADMAP already has bundled with P2's
other half (reserve index 0 as black) and 55's two open re-encode questions.
**It should join that bundle**, and P4a should be attempted against a
sector-aligned container rather than against this one.

It also grows the largest record from 40,984 to 41,472 B, which a 256 KB ring
still holds six times over — so it costs nothing in ring size.

### 58.4 What this does and does not move

**Does not move `W`.** Again, and for the same reason 57.6 gives. Nothing here
programmed a DMAC channel; `xf_service` is the CPU standing in for one, through
the DMAC's own door (57.3).

**Does not measure a delivery rate,** and the rig now refuses to be asked. A
`DLX_XFER=scsi` run rejects a `--kbps` argument outright rather than ignoring
it, and `stream.lua` suppresses `CHANNEL IDLE`, `DEADLINE` and `REQUIRED
PREFILL` instead of printing them as zeros — a zero there reads as "the channel
never stopped", which would be a claim about a medium this tree has never timed.

**Does close P4b, and does hand P4a a sharper question than it had.** Before
this session, "get the DMAC to hold the bus" was worth 9 clk/B against 19. It is
now worth 87 against either.

**Does put a real number on the layer below every previous delivery result.**
Everything in FINDINGS 49, 51 and 55 was measured with the bytes arriving free.
They are not free, and 58.2 is the first measurement of what they cost.

---

## FINDINGS 59 — the DMAC drives the data phase, and auto-request is charged by time (session 27)

**Emulated.** MAME 0.277, `x68000 -exp1 cz6bs1 -ramsize 2M`, a blank
`scsiexrom.bin` on a private rompath (57.1's substitution, unchanged). No real
hardware ran. `./tools/bench/check.sh` was ALL GREEN before this and ALL GREEN
after, with one new stage.

**ROADMAP P4a is DONE at the transport level.** What is left before M2 is not a
DMAC question any more; it is the re-encode bundle, because 59.4 makes
sector-aligned records a precondition the transport now enforces rather than a
preference the roadmap recorded.

### 59.1 The channel drives the data phase, and the evidence is the CPU's own progress

`src/player/dma.i` programs HD63450 channel 1 and hands it the DATA IN phase;
`src/player/dmagate.s` reads **the same 2,048 B at LBA 1000 three ways** and the
host compares all three against its own copy of the image:

| | bytes | MTC one instruction after START | CPU trips round its wait loop |
|---|---|---|---|
| PIO, the path 58.2 measured | byte-exact | — | — |
| **DMA, bus HELD** (DCR `$00`, OCR `$81`) | **byte-exact** | **0 of 2048** | **1** |
| **DMA, cycle STEALING** (DCR `$80`, OCR `$80`) | **byte-exact** | 2048 of 2048 | 426 |

Both channels reported `CSR = $E0` (COC, BTC, NDT), `CER = $00`, `MTC = 0` and a
memory address exactly `+2048` from where it started.

**THE DISCRIMINATOR NEVER READS `$EA0015`, and that is the whole design.** 57.3
established that watching the data register cannot answer this question: with
the DMAC's `OWN` asserted — which it is at idle on this machine — MAME cannot
tell a CPU-driven byte there from a DMAC-driven one. So what separates the two
configurations is **whether the 68000 executed anything while the bytes were
arriving**:

    move.b  #CCR_START,DM_CCR       ; the channel is told to go
    move.w  DM_MTC,d0               ; <- sampled by the VERY NEXT instruction

Held, `d0` is **zero**: the entire 2,048-byte transfer happened between two
instructions, because the CPU did not run in between. Stealing, `d0` is the full
count and the CPU then goes round its own loop 426 times while the bytes
trickle in. That is what "holds the bus" means, and it is a fact about the CPU
rather than about the data register.

**The mechanism, named so the claim is not over-read.** MAME models a held bus
by asserting `INPUT_LINE_HALT` for burst + max-rate and clearing it at
end-of-transfer (`hd63450.cpp`). It is not inventing that semantic: MC68450
§5.2.3.3.1 says of maximum-rate auto-request that "all operands in the data
block will be transferred in one burst, so that the DMAC will use **100% of the
available bus bandwidth**". The model and the datasheet agree about what this
configuration does to the CPU. **They do not agree about anything per-operand,
and no `W` is claimed here** (42.5: MAME's DMAC runs on wall-clock attotimes).

**The gate was checked against its own negative.** With the *stealing* register
pair put in the *held* slot, the run still delivers all 2,048 bytes byte-exact
— and `tools/bench/dma_run.sh` goes **red**, on the trip count and on the MTC
sample. A counter that cannot come out different is 58.3's vacuous
"UNDERRUNS: 0/120" again; this one can, and was made to.

`tools/analysis/27_dmac_config.py` decodes the four register bytes out of
`src/player/dma.i` itself, with the same MC68450 field tables
`21_iplrom_dmac.py` reads the IPL ROM with (now one copy, `mc68450.py`). So
"dual address, 8-bit port, burst, auto-request at max rate" is a decode of the
bytes the player programs, not a comment next to them — and it is directly
comparable with Sharp's own disk channel, which 52.5 read as `DCR $80 / OCR $B2`
and priced at 16..19 clk/B.

### 59.2 Three things this model cannot be asked, and they bound the result

Read out of MAME 0.277's source rather than inferred from behaviour:

1. **The card has no request line to the DMAC.** `x68k_scsiext.cpp`'s `drq_w`
   only stores a flag; the expansion slot carries no request to the HD63450 at
   all (`x68k.cpp` wires `drq0` from the FDC and `drq3` from ADPCM, and nothing
   else). The card's flow control is **DTACK**: on a DMAC cycle with DRQ low it
   negates DTACK and the channel discards that operand and retries. So **REQG =
   10, external request — the mode the ladder's `W`=5 and `W`=12 rows assume —
   cannot be run here at all.**
2. **Single address cannot be run either.** `hd63450.cpp` takes the implicit
   path only for a channel with a device callback, and on this machine only
   channel 0 (the FDC) has one. `DTYP` = 10/11 on channels 1..3 falls through to
   the dual-address code.
3. **Only burst is modelled as held.** The device tests `(dcr & 0xc0) == 0`, so
   XRM = 10 (cycle steal *without* hold) and XRM = 11 (cycle steal **with**
   hold) are one code path.

**So of the four rows of the per-byte ladder, exactly one — dual address, bus
held, 9 clk/B — has a code path in this model, and it is the one demonstrated.**
That is a bound on the apparatus, not a result about the board. The slot's own
pinout has `#EXREQ` at B36, so a real CZ-6BS1 plausibly drives it; whether it
does is ROADMAP B3, and it is now a sharper question than "which DTYP".

### 59.3 Auto-request is charged by TIME, not by byte — and the GCR is the lever

This is the finding that outlives the emulator. Every `W` in this project is
**clocks per delivered byte**, which presumes the device asks for each one. An
auto-requested channel does not know whether the device is ready: it takes the
share of the bus it was told to take and spends it either way. So the cost of a
record scales with **how long the record takes to arrive** — halve the delivery
rate and the CPU cost of the same record **doubles**. No `W` does that.

`tools/analysis/28_autorequest_cost.py` prices it from MC68450 §3.8 and
§5.2.3.3.2, and gates its formulas against Table 5-3's sixteen printed rows
before printing anything. At the gate container's 37,405 B mean record and
**460 KB/s, an explicit rate and not a measurement** (FINDINGS 50):

| configuration | sustains | charged to the 68000 | % of a 12 fps frame |
|---|---|---|---|
| REQG 01, max rate — what 59.1 demonstrated | the wire | 21.23 clk/B | **95.3%** |
| REQG 00, LRAR, BR = 00, 50% of the bus | 534 KB/s | 10.61 clk/B | **47.6%** |
| REQG 00, LRAR, BR = 01, 25% | 267 KB/s | 5.31 | 23.8% — **does not carry the rate** |
| REQG 00, LRAR, BR = 10, 12.5% | 133 KB/s | 2.65 | 11.9% — **does not carry the rate** |
| *(ladder, for comparison)* `W`=9 dual held | — | 9 | 40.4% |
| *(measured, 58.2)* PIO | — | 87.28 | 391.8% |

**The held configuration is the cheapest per byte MOVED and the dearest per byte
DELIVERED**, and the gap between those two is the device's own slowness: 9
clocks of DMAC work inside 21.2 clocks of waiting means **42.4% of the held bus
does anything at all**. Holding the bus is only cheap when the hold is ended by
the device, which is what external request is for.

**BT and BR are two bits each and they set what fraction of the bus the player
gives away** (burst time `2^(BT+4)` clocks, sample period `2^(BT+BR+5)`, share
`2^-(BR+1)`). Nothing in this tree had named the GCR as a design choice; it is
the same kind of lever as `aligned` vs `split` and it belongs in the same list.
**At 460 KB/s only BR = 00 carries the rate**, so the fallback plan — if a real
card turns out not to drive `#EXREQ` — is 50% of the bus for the duration of
every record, or 47.6% of a frame slot per record. That is affordable and it is
not free, and it is the first cost model in this project that gets *worse* when
the disc gets slower.

**59.3's one load-bearing assumption**, stated because the whole table rests on
it: that the channel *spends* its allotted share whether or not the device has a
byte. Under auto-request a request is pending until MTC is exhausted, so the
DMAC takes the bus during every window it is entitled to; when the device is not
ready the cycle is stretched by wait states (a real card negating DTACK) or
retried later (MAME's model discards the operand), and either way the window is
gone from the CPU's point of view. **If a real CZ-6BS1 instead lets the DMAC off
the bus early when no byte is there, 59.3's figures are upper bounds.** That is
a board question, and it is B3's.

### 59.4 The window is refused, and that makes the re-encode a precondition

58.3 found that 117 of 120 records start part way into a sector, and that PIO
absorbs it for free because the CPU is already touching every byte. A channel
cannot: it writes a contiguous run and cannot be told to drop the 300 bytes in
front of the record. `sc_in_data` now **refuses** a windowed read when the data
phase is the DMAC's — a new error, `SCE_WINDOW` — rather than quietly delivering
the neighbouring records' bytes into the ring, where the block loop has no
bounds check to catch them (49.2). The gate asserts the refusal.

**So "sector-aligned records" has stopped being a preference in ROADMAP's
re-encode bundle and become the thing standing between P4a and the ring.** The
transport states its own precondition; the container does not meet it yet.

### 59.5 What this does and does not move

**Does not move `W`.** Not by one clock, for the third session running, and for
the reason 57.6 and 58.4 give.

**Does not put the DMAC behind `ring.i`'s mailbox.** 59.4 is why: `xfer.i` asks
for records, and every record but three needs a window. That work is now
downstream of the re-encode bundle rather than of a DMAC question.

**Does close the question ROADMAP called P4's first job.** A configuration that
holds the bus exists, runs, delivers the disc's bytes byte-exact, and is
demonstrated by evidence that does not come from watching `$EA0015` — which is
exactly what 57.3 said would be needed.

**Does change what the fallback looks like.** Before this session the fallback
below a held bus was `W` = 16..19, the IPL ROM's own arbitrated configuration.
It is now limited-rate auto-request at a share the player chooses, priced in a
currency the project did not have, and the arithmetic says a 50% share carries
this container at 460 KB/s.

### 59.6 One collision, and it was caught by the half of `check.sh` that runs first

`DM_USE` — the word that tells `sc_in_data` whether the data phase is the
DMAC's — was first placed at `$18300`. `scsi.i`'s trace ends at `$182FF` and the
next 160 bytes are the **ring's**: `$18300` is `ring.i`'s `XF_SLOT` mailbox, and
`tools/bench/stream.lua` reads the same addresses from outside the machine. So
the ring rig's first record request wrote a non-zero word into what the
transport now read as "use the DMAC", and **the P4b stage — a stage this session
did not otherwise touch — went red on a run that never reached its snapshot.**

Recorded because the procedure is the finding: `check.sh` was ALL GREEN before
any of this work, so the red was unambiguously new, and the failure was in a
stage nobody would have re-run on suspicion. Both halves of "green before and
green after" earned their place; the map is now `$18500`, clear of everything
the streaming rig owns.

### 59.7 What it all costs: the frame affords 6.74 clocks a byte, and a dual-address byte is 9

The sweep in `15_bus_occupancy.py` has always answered *"what does each `W`
cost"*. It never answered *"what can the frame afford"*, and after 59.2 those
stopped being the same question. The tool now answers both; every figure below
is it, on the gate container at 12 fps, and the decode term is **measured**
(C68K) while the transport terms are datasheet arithmetic — except PIO, which
58.2 measured.

    frame slot          833,333 clk
      decoder, MEASURED  570,958 clk   68.5%   (worst frame 110.8%)
      audio DMA           10,417 clk    1.25%
      ------------------------------------------
      HEADROOM           251,958 clk   30.2%  = 6.74 clk/B at a 37,403 B record

| transport | clk/B | video | CPU+audio+video |
|---|---|---|---|
| PIO — **measured**, 58.2 | 87.28 | 391.7% | **461.5%** |
| dual address, arbitrated — the IPL ROM's own (52.5) | 16..19 | 71.8..85.3% | 141.6..155.0% |
| single address, arbitrated | 12 | 53.9% | 123.6% |
| **dual address, held — and the FLOOR of every dual-address configuration** | **9** | 40.4% | **110.2%** |
| single address, held | 5 | 22.4% | **92.2%** |

**WHAT P4a BOUGHT: the transport falls from 391.7% of a frame to 40..95%**, four
to ten times. That is the whole of the gain and it is the largest single
movement in the project's cost model since the decoder was written.

**WHAT IT DID NOT BUY IS A FIT, and the reason is one line of arithmetic.** A
dual-address byte is a 4-clock read of the device and a 5-clock write to memory
— `buscost.DMA_DUAL_BYTE_CLK`, Fig 4-25 — so **9 clocks is a floor, and the
frame affords 6.74.** No GCR share goes under it and no delivery rate goes under
it: a share decides whether the channel sits *at* the floor or *above* it. So
**59.2's three bounds arrive in the budget as one sentence — the configurations
this machine can run are exactly the ones the frame cannot afford**, and the one
it can afford is single address, which needs the device to ACK, which needs the
request line ROADMAP B3 asks about.

**The rate sweep says the same thing from the other side.** At 460 KB/s
max-rate totals **165.1%** and LRAR at 50% totals **117.4%**; the smaller shares
total less but cannot carry the rate at all. A faster disc makes auto-request
cheaper — which no `W` does, and it is the first cost in this project that
improves when the medium does — but it cannot reach the floor: **a 50% share
tops out at 543 KB/s**, above which the channel is the bottleneck and the
delivered rate falls back to it, at which point the cost is exactly 9 clk/B
again.

**SO THE FIT NOW TURNS ON ONE OF TWO THINGS, AND ONE OF THEM IS OURS.**

1. **Does a real CZ-6BS1 drive `#EXREQ`/`#EXACK`?** It is the only route to
   single address, 22.4%, 92.2% total, fitting with 7.8% to spare. MAME cannot
   answer it — it does not connect the pin (59.2) — and the slot pinout has it
   at B36/B37. **This is now the sharpest form ROADMAP B3 has ever had**, and it
   is worth more than the throughput half of B1: B1 sets how much headroom the
   player has, B3 decides whether there is any.
2. **Bytes.** At the 9 clk/B floor this container must come down to **27,995 B a
   frame — 328 KB/s of payload**, against the 37,403 B and 438 KB/s it is now:
   **34% too big.** That is an encoder target, it is entirely inside this
   project, and **it is the pessimistic reading of the lever**, because a
   lighter container also decodes cheaper and the decode term falls with the
   byte term.

**WHAT THIS IS NOT.** It is the **gate container**, which is deliberately the
heaviest thing the encoder emits — the span-heavy scsi container encoded to the
488 recipe, chosen so that every block mode and the newest span path are
exercised (check.sh's own note). The lighter `cpufit` family exists and was NOT
measured here: `15_bus_occupancy.py` refuses it, correctly, because the C68K
measurement in `tmp/c68k_frames.csv` belongs to the gate container and the
cross-check at the top of the tool is what licenses every number under it.
**Re-deriving 59.7 against a lighter container needs that harness re-run first**,
and until it is, "34% too big" is a statement about the heaviest container and
not about the project.

---

## 60. The re-encode bundle: the container agrees with the medium, and two encoder levers turn out not to be levers (session 28)

**Emulated** — MAME 0.277, `x68000 -exp1 cz6bs1 -ramsize 2M/6M`, plus px68k's
C68K core in `tools/bench/c68k`. **No real hardware ran.** `./tools/bench/
check.sh` was ALL GREEN before this session and is ALL GREEN after it, including
a full re-encode of the gate container.

ROADMAP's re-encode bundle was four items collected under P2 because they shared
one re-measurement. All four are now closed, and **two of them close as
negatives** — which is the more useful half of the session.

### 60.1 DLX5: the container is laid out in sectors, and the disc now moves exactly the records

`tools/encoder/encode.py` pads every record up to **512 bytes** instead of 4,
and pads the scene header so the frame stream itself starts on a sector
boundary. `tools/encoder/dlx.py` reads it as `DLX5`; `rec_align` is a property
of the container version and `record_lengths()` is the one place the rule is
applied, replacing four hand-copied `4 + n + (-(4+n) % 4)` expressions in the
analysis tools.

**Why 4 was not enough** is 58.3 option C and 59.4: a SCSI target answers in
512 B blocks, 117 of 120 DLX4 records started part way into one, and
`sc_in_data` **refuses** a windowed read when the data phase belongs to the
DMAC, because a channel writes a contiguous run and cannot drop the 300 bytes in
front of a record. Windowed PIO absorbed that for free and does not survive the
move to the channel.

| on the gate container | DLX4 | **DLX5** |
|---|---:|---:|
| records starting on a sector boundary | 3/120 | **120/120** |
| bytes off the disc, for 4,488,577 B of record | 4,548,608 (+1.34%) | **4,510,208 (+0.48%)** |
| bytes into the ring | 4,488,588 | **4,510,208** |
| clocks of window or bounce copy | 0 (PIO only) / +5 clk/B (DMA) | **0, and a channel can run it** |
| largest record | 40,984 B | 41,472 B — a 256 KB ring still holds it 6 times |

**The disc figure and the ring figure are now the same number, and check.sh
gates on that identity** rather than on two constants. Both are read out of the
container at check time: the old gate had 4,488,588 and 4,548,608 written into
it as literals, and the re-encode went red on both — correctly, because the
container had changed and the expectation had not. **A gate whose expected value
is a literal tests the literal.**

### 60.2 The consumer had to be told, and the failure was a byte-exact wrong answer

`stream.s` released the ring up to the last byte it *read*, rounded to 4. Under
DLX5 that strands up to 511 bytes of pad per record, and the ring's own audit
caught it on frame 0: `RD_PTR MISMATCH: decoder released 00040F08, record ends
00041000`. The release now rounds to `RECALN` (geom.i), which is the record
alignment the container guarantees, and is correct only because the ring base is
`RECALN`-aligned too — stated where the constant is defined rather than assumed.

**This is the shape of the whole item.** Sector alignment is not a tidier
version of 4-byte alignment; it is a contract with *two* sides, and the producer
side alone would have drifted the free-space arithmetic by up to 511 B a frame
with every frame still decoding pixel-exact.

### 60.3 Reserved black at index 0 — the letterbox is true black, and it costs 0.04 dB

23.4, open since session 5, was the other half of P2. `VQ.scene_palette` now
quantises the picture into **255 entries and reserves index 0 as (0,0,0)**;
`dlxload.pack_palette` gives it `I = 0` by its own minimum-squared-error rule
with no special case, so 23.3's "the bars sit at RGB (4,4,4)" goes away for
free. GVRAM cleared to zero displays entry 0, and a free mediancut palette put a
real image colour there — on 00020 f0001, `(206,192,176)`, used by 210 image
pixels.

Black is **reserved, not withheld**: the mapper may still spend index 0 on
genuinely black pixels. What the reservation buys is that index 0 is black
whatever the scene contains, which is what the letterbox needs and what a free
palette cannot promise. Measured cost on the Singe window: **28.92 dB → 28.88 dB
at `--spans need`**, and the palette ceiling is unmoved at 31.32 dB.

### 60.4 `--spans all` as the default: MEASURED, and the recommendation is REFUSED

E2 has been "a recommendation, not a measurement" since 43.6.1. It is now a
measurement, on the DLX5 container, 120 frames, the gate recipe
(`--kbps 280 --span-kbps 488`):

| | KB/s incl. audio | PSNR | frames that miss the 12 fps deadline |
|---|---:|---:|---:|
| `--spans need` (shipped default) | **267.9** | 28.88 | 2/120 |
| `--spans all` | 448.2 | 29.07 | 1/120 |

**+67% of the wire, for +0.19 dB and one frame of 120.** Session 27 established
that the frame affords 6.69 clocks a byte and that a dual-address byte costs 9,
so the container's problem is that it is too big; spending 180 KB/s to buy a
fifth of a decibel is the wrong direction, and `need` stays the default.

**The item is closed, and the answer is no.** The gate container keeps
`--spans all` — it is a fixture chosen to exercise the newest path in the
decoder, not a shipping recipe, and check.sh says so.

### 60.5 Joint span/lam selection: implemented, measured, and it is a NO-OP for a reason

E3 (39.3 item 5) asked for span selection to be re-derived jointly with `lam`
instead of greedily after it. The argument is sound on paper: the span pass
*removes* the block payload of every block it covers, so the frame lands under
its byte allowance and the blocks that were **not** spanned were priced at a
`lam` chosen as if those bytes were still needed.

`ratectl._refit_joint` (`--joint-spans`) hands the freed bytes back to the lam
search and re-spans, to a fixed point or two rounds. A round is kept only if the
frame still fits both ceilings it was already fitting, so `lam` can only fall
and the un-spanned blocks can only improve.

**It emits byte-identical containers.** All four cells of `{need, all} x {greedy,
joint}` produce two md5s, not four — and so does `--rc-floor open`:

| | lam, 120 frames | container |
|---|---|---|
| `need` greedy / joint | 10.0 min, median, p90, max | **identical** |
| `all` greedy / joint | 10.0 min, median, p90, max | **identical** |
| `all --rc-floor open` greedy / joint | 1.0 min, median, p90, max | **identical** |

**The reason is 44.3, and it is structural rather than incidental: `lam` never
leaves its floor on any frame, at either floor the encoder offers.** The block
coder at the profile floor already lands under the per-frame byte budget, so
there is nothing for a joint re-search to spend the freed bytes on. E3 is not a
lever, and it is not a lever for the same reason `--kbps` and the bucket are
not: **the byte side of this encoder is governed by the span pass and by `mu`.**

The code stays, defaulted off, because the measurement is the finding and a
future container that moved `lam` off its floor would make the question live
again. That is 44's pattern kept deliberately: ask whether the lever is loaded
before pulling it.

### 60.6 The apparatus lied, silently, and only a byte comparison caught it

**MAME 0.277 served a compressed CHD's own file bytes as sector data.** On the
DLX5 volume, every `READ(10)` reported success and returned the wrong bytes: the
destination buffer after a 4,096 B read at LBA 0 was **byte-for-byte the first
4,096 bytes of `dlxdisk.chd`, starting `MComprHD`** — the CHD file header — while
`chdman verify` reported both SHA1s correct.

Isolated by experiment, and the trigger is the image's **content**:

| volume | compression | result |
|---|---|---|
| DLX4 gate, 8,768 sectors | default (lzma/zlib/huff/flac) | **byte-exact** |
| DLX5 gate, 8,809 sectors | default | CHD header served as LBA 0 |
| DLX5 gate, padded to 9,072 sectors, 16x63 geometry | default | same failure |
| DLX5 gate, **truncated to 8,768 sectors** — the working length | default | same failure |
| DLX5 gate | `-c zlib` alone | same failure |
| DLX5 gate | **`-c none`** | **byte-exact** |

So it is not size, not geometry and not the codec; compression decides it and
uncompressed is sound. **The MAME-side cause is not diagnosed** and is not
claimed here. `tools/bench/mkvol.sh` now builds the volume `-c none`, at 4.5 MB
in `tmp/` against 1.6 MB, with the measurement written next to the flag.

**What is worth keeping is not the workaround.** The failure was *silent at the
transport layer* — the SPC handshake completed, the phase sequence was correct,
the byte count was right, and `scsi_read` returned 0. The only thing in the tree
that could see it was `tools/bench/scsi.lua` comparing every delivered byte
against the host's copy of the same image. A transport gate that checked status
and length would have been green all session, and FINDINGS 58's "byte-exact
against the host's copy" would have been the load-bearing phrase nobody noticed.

### 60.7 What the bundle did to the budget: almost nothing, which is the result

The re-measurement the four items shared, on the rebuilt gate container, with
`tmp/c68k_frames.csv` regenerated by the same `check.sh` run:

| | before (DLX4, session 27) | **after (DLX5, session 28)** |
|---|---:|---:|
| decoder, MEASURED on C68K | 68.5% of the frame | **68.6%** |
| delivered bytes a frame | 37,403 | **37,585** (the pad is delivered, so it is charged) |
| headroom after decode + best-case audio | 6.74 clk/B | **6.69 clk/B** |
| single address held, `W`=5, total | 92.2% | **92.4%** |
| dual address held, `W`=9, total | 110.2% | **110.4%** |
| E7's byte target at the 9 clk/B floor | 328 KB/s, 34% too big | **327 KB/s, 35% too big** |
| B1's zero-prefill delivery requirement | 451.4 KB/s | **453.6 KB/s** |
| scene header (P1/53.5, 22_scene_load) | 6,164 B | **6,656 B** |

**Every conclusion in 59.7 survives unchanged**, which is what a precondition is
supposed to do: it removes an obstacle without moving the arithmetic. The two
numbers that did move are both the alignment pad being paid honestly —
`15_bus_occupancy.py` now charges the **padded** record rather than the payload,
because the disc carries the pad whether or not a frame contains it.

### 60.8 Two caches that would have tested the wrong artefact

`H.build` acquired an option this session (`reserve_black`), and two tools cache
its output in a pickle **keyed on the frames directory alone** —
`16_span_roundtrip.py`, which is the span container's round-trip gate, and
`13_cpu_ratectl.py`. A stale pickle would have let the gate round-trip a
container built from the old palette while the shipping encoder emitted the new
one: green, and testing an artefact that no longer exists. Both now store the
build parameters with the model and rebuild on a mismatch.

### 60.9 What is now true, and what P4a still owes

**M2's re-encode bundle is done and the container is what the DMA path needs.**
`dma_run.sh` still gates on the *refusal* — `WINDOWED DMA READ REFUSED, as it
must be` — which is now a negative control rather than a description of the
container, because the container no longer asks for a windowed read.

What is left of P4a is the wiring: putting the channel behind `ring.i`'s `XF_*`
mailbox in place of the PIO loop in `xfer.i`, which 59.4 blocked on exactly this
precondition. `xfer.i`'s sector arithmetic already degenerates correctly —
`SC_WSKIP` is 0 and `SC_WKEEP` is the whole record on every record — so what
changes is which loop moves the bytes, not what is asked for.

## 61. The decoder-free packed player fits the clocks the codec misses, and the codec cannot have the packing (session 29)

**Emulated.** MAME 0.277, `x68000 -bios ipl10`, and for the transport runs
`-exp1 cz6bs1` with a zero-filled `scsiexrom.bin`. No real hardware ran, and
47.4 — does buffer mode blank the layer — still wants a board.

FINDINGS 44.7 asked what a player with no codec at all would cost and answered
"it fits the clocks and dies on the medium". 46.5/47.1 found the off switch for
the 2:1 GVRAM tax, 47.2 built the packed layout and rendered it pixel-exactly on
both emulators, and **47.5 re-derived the budget on a cost model that has since
been replaced in full** — the transport was an unmeasured `c` when it was
written, and sessions 25b–28 measured it (58.2), bounded it (59.2) and priced
what a frame can afford against it (59.7/60.7). 47.6.1 filed the packed paint's
`movem` shape as an *assumption*; 47.6.2 said the DMAC "has not been near this";
47.6.4 left the codec's own survival under the layout untouched.

All four are answered here. `tools/analysis/29_packed_player.py` is the
arithmetic, `tools/bench/blit.s` V8/V9/V10 are the paint measurements, and
`src/player/dmagate.s` runs 4–6 are the transport ones.

### 61.1 The packed paint, MEASURED: it costs what the unpacked path pays to WRITE

`blit.s` V8 is V1 with one thing different — a row is 128 words instead of 256,
because R20 bit 11 lets a word carry two picture bytes — and `blit.lua` times it
in the same run as V1, V2 and V3, so it is quoted against numbers that have not
moved since session 9.

| variant | clk/frame | % of a 12 fps frame | what it moves |
|---|---:|---:|---|
| V1 unpacked `movem` blit | 446,286 | 53.6% | 96 KB read + 96 KB write |
| V2 byte-source expansion | 1,284,174 | 154.1% | 48 KB read + 96 KB write |
| V3 unpacked WRITE-ONLY floor | 225,789 | 27.1% | no source read at all |
| **V8 PACKED `movem` blit** | **227,553** | **27.3%** | **48 KB read + 48 KB write** |

All four put the same 49,152 pixels on screen. **V8 is 51.0% of V1 and 100.8% of
V3: the packed blit costs what the unpacked one pays to write alone, with its
source read thrown in free.** It is not exactly half of V1 because the 192-row
loop does not halve with the words — per word V1 is 9.080 clocks and V8 is
9.259, and the difference is the row loop amortised over half as many bursts.

V2 is worth keeping in view: it is the "send 1 byte a pixel and let the CPU
expand it" trade, and at 154.1% it is not a trade, which is why the unpacked
path has no cheap wire.

V8 is a **timing** variant and does not set bit 11. MAME's `gvram_w` carries no
timing in either arm, so the bit cannot move a cycle; what it moves is the
picture, and the picture is what `show_frame256_packed.lua` and `gvpack` already
verify pixel-exactly (47.2). The source is pre-interleaved host-side, which is
the honest half of the claim — the packing is an encoder-side transform, the
same argument 46.3 made for the text plane.

### 61.2 The channel writes GVRAM in buffer mode, and it walks the line stride itself

47.6.2 was right that nothing in this tree had ever pointed a channel at
`$C00000`. `dmagate.s` now does, three times, and `dma_run.sh` gates all three:

| run | R20 | result |
|---|---|---|
| **4. DMA → GVRAM, bus held, bit 11 SET** | `$0916` | **2,048 B byte-exact against the disc**; 1,024 landed in page 1 (high half), 1,024 in page 0 |
| **5. the SAME, bit 11 CLEAR** | `$0116` | **457 bytes lost, every one of them at an EVEN offset; not one ODD byte harmed** |
| **6. ARRAY CHAINED, 8 rows at the 1024 B stride** | `$0916` | **2,048 B byte-exact at eight separate row bases from ONE start**; `MAR` ended at `+7,424` |

In all three the discriminator reads the same as 59.1's: **`MTC` sampled by the
instruction after `START` is 0 of 2,048 and the CPU went round its wait loop
once** — the whole transfer happened between two instructions.

**Run 5 exists because the first cut of run 4 was a test that could not fail.**
It OR-ed bit 11 on top of whatever the IPL left, and the IPL leaves `$0B16`
(22.1) — bit 11 **already set**, and `COL = %11`, the 65,536-colour setup, which
writes whole words with or without it. It passed and proved nothing. Both runs
now write R20 outright and differ in exactly that bit.

**And the control's signature is a PLACE, not a count.** The obvious assertion —
"half the bytes must differ" — is wrong, and asserting it turned the gate red on
a correct run. In masked 256-colour mode `gvram_w` takes `data & 0x00ff` and
ignores `mem_mask`, so a byte written to an even address is never stored and the
high half keeps what it held; where the record is pad, the stale half matches the
disc by coincidence, and 567 of 1,024 did. What the mechanism says is that
**every odd byte survives and only even ones can be lost**, and that is what the
gate asserts.

Run 6 is the one that changes an architecture. A picture row is 256 B of a
1,024 B line stride, so a frame is **192 destinations, not one**, and a channel
writes a contiguous run — the same limitation that makes it refuse a windowed
read (58.3). 46.6 said "no stride for a DMAC to skip" about the bytes *within* a
row and never examined the rows. The MC68450 answers with sequential array
chaining, `src/player/dma.i` now programs it behind a `DM_BARV` mailbox that is
**zero unless a caller asks**, and the channel walked an 8-entry array on its
own. **The CPU does not restart the channel per row.**

### 61.3 The codec cannot have the packing — 47.6.4, closed

A 4×4 block owns four bytes at **stride 2** under the packed layout, because the
high bytes of its four words belong to the block 128 columns away. There are
exactly two ways a block decoder could live with that, and `blit.s` V9 and V10
are them:

| variant | clk/frame | % of frame | vs V4 |
|---|---:|---:|---:|
| V4 block order, UNPACKED (the shipping shape) | 637,971 | 76.6% | — |
| **V9 block order, PACKED, 16 `move.b` at stride 2** | **815,839** | **97.9%** | **+28%** |
| **V10 block order, PACKED, blocks PAIRED** | **320,456** | **38.5%** | **−50%** |

**V9 is 28% DEARER than V4, and buys nothing on the wire** — a codeword is
already one byte a pixel, so the packed layout has no bytes left to save a block
decoder. That route costs 177,868 clocks a frame for nothing.

**V10 halves the paint and pays for it in the mode map.** Pairing the block at
x with the block at x+128 gives V4's `movem` shape back, and a pair skips only
if *both* its blocks skip. On the gate container:

| | now | paired |
|---|---:|---:|
| SKIP | **66.3%** of blocks | **46.1%** of pairs |
| painted | **33.7%** | **53.9%** |

So pairing paints **1.60×** as many blocks for **0.50×** the paint per block:
**−20% on the clock, and about +60% on the BYTES**, because a coded block is
bytes in the container whether its half of the pair changed or not. E7 needs the
bytes **down 35%**.

**The packed layout is not an upgrade the codec can take. It is the thing you
get instead of the codec.**

### 61.4 The budget, re-derived on the measured model

Every cell below is CPU work plus transport plus best-case audio (10,417 clk,
1.25%, from the IPL ROM's own channel-3 setup — 21_iplrom_dmac.py). None of them
overlap: `buscost.DMA_OVERLAPS = False`.

| architecture | B/frame | W=5 | **W=9** | W=12 | W=16 | W=19 |
|---|---:|---:|---:|---:|---:|---:|
| CODEC, CPU-decoded (the shipping design) | 37,585 | 92.4% | **110.4%** | 124.0% | 142.0% | 155.5% |
| free / DMAC device→GVRAM / unpacked | 98,304 | 61.1% | 108.2% | 143.6% | 190.8% | 226.2% |
| **free / DMAC device→GVRAM / PACKED** | **49,152** | 31.6% | **55.2%** | 72.9% | 96.5% | 114.1% |
| free / CPU-painted / unpacked, 2 B/px wire | 98,304 | 113.8% | 161.0% | 196.4% | 243.5% | 278.9% |
| free / CPU-painted / unpacked, 1 B/px wire | 49,152 | 184.8% | 208.4% | 226.1% | 249.7% | 267.4% |
| **free / CPU-painted / PACKED** | **49,152** | 58.0% | **81.6%** | 99.3% | 122.9% | 140.6% |

**W=9 is the column that matters**, because 59.2 found the only configurations
this machine can be shown to run are dual-address, and a dual-address byte is a
4-clock read of the device plus a 5-clock write to memory. Everything left of it
is a hardware fact nobody here has (ROADMAP B3).

**At the floor the CODEC misses by 10.4% and the DECODER-FREE PACKED PLAYER FITS
WITH 45% TO SPARE.** Decoding 37,585 bytes costs 109% of a frame; not decoding
49,152 costs 54%.

That is not a small correction to 47.5. **44.7 said it in advance, on a cost
model that has since been thrown away: "the codec is not there to save CPU — it
is there to save the wire."** The measured model agrees and goes further: the
CPU side is not merely affordable without the codec, it is *strictly cheaper*.

### 61.5 So it is entirely a medium question, and the medium is the unmeasured one

| architecture | B/frame | KB/s | GB for 22.8 min |
|---|---:|---:|---:|
| CODEC, gate container | 37,585 | 440.4 | 0.62 |
| CODEC, `need` default | — | 267.9 | ~0.38 |
| CODEC, E7's target at the 9 clk/B floor | 27,924 | 327 | 0.46 |
| **decoder-free PACKED, either architecture** | **49,152** | **576.0** | **0.81** |
| decoder-free unpacked | 98,304 | 1,152.0 | 1.61 |

**576 KB/s, sustained, with no lever to pull.** A codec's bitrate is a lever; a
literal frame's is geometry, and no scene in the picture costs less than another.
ROADMAP B1 is unmeasured, and the 0.7–1.7 MB/s usually quoted for BlueSCSI on an
X68000 is **folklore with no published benchmark behind it**. 576 KB/s sits
inside that range, which is exactly the reason the range has to be measured
rather than cited: **a codec at 327 KB/s survives a slower answer and a literal
frame does not degrade, it drops.**

**B1 has therefore changed character.** It used to set how much headroom the
player has. It now decides which player exists.

### 61.6 And under MAME's blanking reading, the cheap architecture is the dark one

47.4's question is untouched by any of this and it still needs a board. What the
measured paint does is turn 48.3's range into numbers, and it exposes an
asymmetry nobody had stated: **R20 bit 11 only has to be set across the GVRAM
writes, and where those writes come from decides how long that is.**

| architecture | black interval | bit 11 set for |
|---|---:|---|
| free / DMAC device→GVRAM / unpacked | 60%..225% of a frame | the whole DMA |
| free / DMAC device→GVRAM / PACKED | 30%..113% of a frame | the whole DMA |
| free / CPU-painted / unpacked | 53.6% | the blit only |
| **free / CPU-painted / PACKED** | **27.3%** | **the blit only** |

The CPU-painted packed path has the smallest black window of any of them,
because its transport lands in RAM where bit 11 is irrelevant and only the
227,553-clock blit needs the bit. **The DMAC-direct path, which is cheaper in
clocks at every rung of the ladder, is the one that must hold the bit across its
whole transfer.** If MAME is right, the cheap architecture is the dark one and
the expensive one is merely dim.

Both are a strobe at the frame rate over the whole picture, and the packed layout
has no page to flip to: both 256-colour pages carry picture, which is the entire
point of it (48.3). If px68k is right, every number in 61.4 and 61.5 stands as
written. 48.1's prior — an assertion against a silence — has not moved.

### 61.7 What this does NOT establish

1. **No clock here is a transport clock.** MAME's DMAC runs on wall-clock
   attotimes and models a held bus by halting the CPU (42.5), so runs 4–6 settle
   which configurations *work* and not what one costs. Every `W` in 61.4 is
   datasheet arithmetic except PIO, and the array-chain entry at 36 clocks is
   Fig 4-25 sheet 1, not a measurement.
2. **One frame's worth of transport, not a stream.** Run 6 chained eight rows,
   not 192, and nothing here ran a chained transfer back to back at 12 fps or
   through `ring.i`. A decoder-free player has no ring at all in the DMAC-direct
   form, which is a simplification this tree has not tested.
3. **The paint is a lower bound.** Every `blit.s` number is instruction cycles
   against zero-wait-state memory; real GVRAM stalls the CPU and neither
   emulator models it (`blit.lua`'s header, and 45's note on C68K).
4. **61.3's pairing cost is one container's.** 66.3% / 46.1% is the gate
   container, deliberately the heaviest thing the encoder emits. A lighter
   container has a different SKIP map and would pair differently — though not,
   at that margin, differently enough to change the sign.
5. **No audio, no branching, no seek.** 61.4 charges the audio DMA and nothing
   else. A decoder-free player still has to make 56's branch decisions and 51's
   seeks, and at 576 KB/s it has less slack to make them in, not more.

### 61.8 Encoder work is parked (session 29, USER DECISION)

61.4 first closed with "nothing here is a reason to stop work on the codec — it
is the only branch that survives a slow answer to B1." **That does not survive
its own arithmetic and is withdrawn.**

It rested on 576 KB/s against **E7's 327 KB/s target, which does not exist.** The
codec that exists is **440 KB/s and 110.4% of a frame**, so the gap is **1.31x,
not 1.76x** — and reaching 327 needs a 35% byte reduction after 60.4 and 60.5
measured two of the encoder's three byte levers and found neither is a lever. The
reward on success is a design at ~100% of the frame with no margin, which is where
55.2% already is.

The two branches are not symmetric, and counting what each NEEDS is the argument:

| | facts it needs |
|---|---|
| **decoder-free packed** | buffer mode does not blank (B2); medium clears 576 KB/s (B1) |
| **codec** | E7 succeeds (unproven, two levers dead); **and** medium clears 327; **and** it ships at ~100% of a frame |

**So E7 and E4 are parked, and C1 with them.** E4 is included deliberately: it is
`H.build`'s k-means, it builds **VQ codebooks**, and a literal player has no VQ.

**What is NOT parked is the codec itself.** It stays on disk, gated by check.sh,
and nothing is built on it. 48.1's prior leans against packing — MAME asserts the
blanking semantic twice and deliberately, px68k's display path never reads the
bit at all, and an assertion against a silence is not a tie — and 48.3 stands:
if buffer mode blanks there is no version of the packed player that is merely
expensive. In that branch the codec is the only path left. **Keeping a working
decoder is inventory; building on it is work, and the work waits on B2.**

### 61.9 And the picture is BETTER — the codec is capped below the thing replacing it

Asked while scoping what a packed player would take, and it is the finding that
makes the branch worth building rather than merely affordable. The numbers are
`18_text_plane_16col.py`'s, over the same 120-frame window everything else is
measured on; 46.3 computed them to give the *text plane* something to be scored
against and never turned them on the 256-colour path itself.

| | PSNR vs the 24-bit source |
|---|---:|
| shipping container (the codec, as it ships) | **29.19 dB** |
| 256 colours, SCENE palette — **the codec's CEILING** | **31.33 dB** |
| 256 colours, **PER-FRAME** palette | **34.08 dB** |

**The middle row is a ceiling, not a rival.** Every codeword the codec emits is
an index *into* `vq.scene_palette`, so no bitrate takes it past 31.33 dB; it
spends 440 KB/s getting within 2.14 dB of it.

**A literal frame has no codebooks, so nothing forces the scene palette on it,
and per-frame palettes become legal.** 46.3 stated the constraint in as many
words while arguing the *other* side — "the 256-colour path cannot do this: its
palette is shared scene-wide because the codec's codebooks are indices INTO it."
Remove the codec and the constraint goes with it.

**So the decoder-free packed player is +4.89 dB on the shipping container and
+2.75 dB past a ceiling the codec cannot cross** — while costing 55.2% of a frame
against 110.4%. It is not a quality compromise bought with clocks. It is better
on both, and the whole of its cost is on the wire.

What the per-frame palette costs:

| | |
|---|---|
| wire | 512 B/frame → 49,664 B, **582.0 KB/s (+1.0%)** |
| clocks | ~2,370, **0.28% of a frame** if the CPU writes it — DERIVED from V8's measured 9.259 clk/word in the same `movem` shape |
| colours | **254, not 256** — the packed layout spends index 0 on the transparency key and puts black at 255 (47.2, `prep_frame.py --pack-transparent`), where `--reserve-black` spends one. A reserved entry measured 0.04 dB in 60.3, so this is noise against +4.89 |

**Two things this does NOT settle.**

1. **Whether a channel can write `$E82000`.** If the palette registers take a
   byte-wide DMA the way GVRAM does in buffer mode, the palette is a 193rd array
   entry and costs the CPU nothing at all — one channel start still paints a
   whole frame. 61.2 only ever pointed a channel at GVRAM. **This is the next
   probe, and it is the same shape as the ones that worked.**
2. **The quantiser is PIL's MEDIANCUT, not this project's.** `vq.scene_palette`
   and `H.build` are what would actually ship the palette. The direction is
   measured and the magnitude is about right; re-derive the per-frame figure
   against the real builder before quoting it as the player's number.

## 62. One channel start paints a whole frame — the palette registers take the DMA (session 30)

**Emulated.** MAME 0.277, `x68000 -bios ipl10`, `-exp1 cz6bs1` with a
zero-filled `scsiexrom.bin`. No real hardware ran. 47.4 — does buffer mode blank
the layer — is still the board question and is still open, and **62.4 adds a
second board question this run created.**

61.9 left the decoder-free packed player one open structural item, ROADMAP K1:
a frame is a picture *and* a palette, and 61.2 had only ever pointed a channel
at GVRAM. If the palette registers at `$E82000` take a byte-wide DMA the way
GVRAM does in buffer mode, the palette is a 193rd array-chain entry and the
whole video path is **one channel start a frame**; if they do not, the CPU
writes 256 words a frame (61.9 derives ~2,370 clocks, 0.28% of a frame) and the
architecture stands anyway. It is the difference between cheap and free, and it
took one run to know which.

`src/player/dmagate.s` runs 7–9, gated by `tools/bench/dma_run.sh`, which
`check.sh` runs. **The answer is free, in this model.**

| run | what it does | result |
|---|---|---|
| **7. DMA → `$E82000`, bus held** | 512 B off the disc into the whole graphic palette | **byte-exact in 256 register words**, read back out of the registers by the 68000 |
| **8. the SAME transfer aimed at RAM** | the attribution control: `$2C000` instead | **byte-exact at `$2C000`, and 256 of 256 palette words still read the poison** |
| **9. ONE array-chained start** | 7 entries: the palette, then six picture rows at the 1,024 B line stride | **2,048 B byte-exact across BOTH kinds of destination**, `MAR` ended at `+5,376` |

In all three the discriminator reads as 59.1's and 61.2's do: **`MTC` sampled by
the instruction after `START` is 0 and the CPU went round its wait loop once** —
the transfer happened between two instructions, with the 68000 not executing.

### 62.1 The destination was POISONED first, because "it matches" has been a weak claim all along

Runs 4–6 wrote into RAM that was zero and GVRAM that was stale, against a record
that is mostly pad. A destination that could already hold the right answer
cannot distinguish a channel that wrote from a channel that did nothing — which
is run 4's could-not-fail trap wearing different clothes (61.2).

So `dg_poison` fills the palette with word *i* = `$A500|i` before each palette
run, written by the 68000 and read back by it. The host does not assume the
poison is a discriminator, it **counts**: `PALETTE POISON IS A DISCRIMINATOR:
511 of 512 positions differ from the disc's bytes`, and the gate refuses a run
where fewer than 500 do. One position coincides, and the pass does not rest on
it.

### 62.2 The control is an ATTRIBUTION control, not a mechanism one — and it says so

Run 5 could point at a mode bit; there is no mode bit here. What had to be
excluded is that run 7's palette held the disc's bytes for some reason other
than the channel having put them there — a readback that aliases somewhere else,
the SPC's own path touching the registers, the poison never having landed at
all. So run 8 is the same transfer with **one thing different, the destination
address**, and it makes two claims from one run:

- the disc's bytes appear at `$2C000`, so the transfer happened;
- **the palette still reads poison in all 256 words**, so what reached
  `$E82000` in run 7 was decided by the channel's `MAR`.

The second claim is also the positive half: it shows the CPU's own writes reach
the registers the host reads back, so the readback path is not the thing under
test.

### 62.3 The 193rd entry is literal, and the array is SCENE-constant

Run 9 is the one that changes the architecture, and it is not "the palette
works" — it is that **one array chain crosses two kinds of destination**: device
registers at `$E82000` and video RAM at `$C14000`, in one start, with the CPU
halted from the first byte to the last. A frame is that shape with 192 row
entries instead of six.

**And the array does not have to be rebuilt per frame.** The row bases are
`$C00000 + row * 1024` and they do not change: the packed layout spends *both*
256-colour pages — page 0 is the low byte of a word and page 1 the high byte
(47.2, and 46.1's page masks) — so there is no spare page to flip into and no
alternate set of destinations to alternate between. The 193-entry array
(1,158 B) is built once at scene setup and started once a frame.

**What is left on the CPU in the video path is therefore the channel start and
the READ(10) that fetches the record — and neither is priced here.** The command
issue is already inside the transport's own account (58.2); the start is about a
dozen register writes and is DERIVED as small rather than measured. Do not quote
"no per-frame CPU work" without that sentence attached: it is no per-frame
*paint* work.

### 62.4 What this does NOT settle, and it is a NEW BOARD QUESTION

**MAME cannot discriminate here, and the reason is in its source.** The graphic
palette is not modelled as a register file at all: `x68k.cpp:817` maps
`$E82000-$E821FF` to `palette_device::read16/write16`, `emupal.cpp:417` forwards
to `memory_array::write16`, and `memarray.h:75` is a plain `COMBINE_DATA`. That
is **RAM that honours `mem_mask`** — so a byte write lands in its half by
construction, and a green run says *nothing in the model forbids it* rather than
*the board takes it*.

This is a different kind of bound from 61.2's. GVRAM has a real handler with a
real 256-colour arm, which is why run 5 could find a mechanism to fail on; the
palette has no handler to be wrong about. **What a byte write to a real
X68000 palette register does is UNMEASURED and this project has no figure for
it** — not folklore, not an estimate, an absence. It goes on the hardware list
as **B4**, and it is cheap: write `$A5` to `$E82000` and `$5A` to `$E82001` from
the CPU on a real board and read the word back.

**The blast radius if B4 comes back negative is small and known**: the palette
leaves the chain, the CPU writes 256 words a frame at 61.9's derived 0.28% of a
frame, and every other claim in 61 and 62 stands. Run 9's crossing would still
have to be re-asked, because it would no longer have a device-register end.

### 62.5 The chain's ORDER is a free choice with a visible consequence, and it is not decided

Run 9 puts the palette FIRST. It could as easily be 193rd, which is what 61.9
called it. The two are not equivalent on screen and neither is obviously right:

- **palette first** — the 192 rows of the *previous* frame are displayed under
  the *new* palette until each is overwritten;
- **palette last** — the new frame's rows are displayed under the *old* palette
  until the chain reaches the end.

The mismatch lasts one paint either way. Which is less visible depends on how
much the palette moves between consecutive frames, which is a property of the
encoder K2 has not been written yet, and the whole question is **moot if buffer
mode blanks the layer** (47.4/B2) because nothing is displayed during the paint
at all. **Filed, not answered.** It is named here so that the choice in the
final player is a decision rather than an accident of which run happened first.

## 63. The packed container, and the palette that buys 2.31 dB has a price nobody had counted (session 31)

**Emulated, and one stage of it is not emulated at all.** The quality numbers
are host arithmetic over the Blu-ray's own frames. The rendering check is
**px68k's real `x68k/gvram.c`**, linked headless the way `tools/bench/c68k`
links its CPU core. No MAME run was needed for any of this and no real hardware
ran. 47.4 — does buffer mode blank the layer — is still the board question, and
this session made it **bigger**.

ROADMAP **K2 is done**. `tools/encoder/dlxp.py` is the format,
`tools/encoder/pack.py` is the encoder, `tools/analysis/30_packed_container.py`
is the gate and the re-derivation, `tools/bench/gvpack/verify_dlxp.py` renders
the container's own bytes on the second emulator, and `check.sh` runs all four.

### 63.1 DLXP1: the container whose correctness is that nothing parses it

`dlx.py` exists because a 68000 has to **parse** the codec's container and can
get it wrong. `dlxp.py` exists for the opposite reason: a DMA channel must not
have to parse anything, and the format is what makes that true.

| | |
|---|---|
| record | **49,664 B = 97 sectors EXACTLY** — 512 B of palette, 49,152 B of picture |
| picture | 192 rows x 128 words, word `i` = `(pix[y][i+128] << 8) \| pix[y][i]` — the layout 47.2 rendered pixel-exactly on both emulators |
| index | **none, and none is possible to need**: a record's length is geometry, so record `i` is at `off_frm + i * rec_bytes` and a seek is arithmetic |
| wire | **582.0 KB/s, fixed** — 61.9 predicted 582.0 and the container is 582.0 |
| encode | **3.3 s for 120 frames**, against ~55 s for the codec, 95% of which is k-means |

DLX4's record index was invented (49.3) because a codec record's length is
content-dependent and a producer streaming off a disc cannot learn it by walking
bytes it has not fetched. **A packed record has no such problem to solve**, and
that is the same reason the packed player has no ring: there is nothing
variable-length to keep contiguous.

**Sector alignment, which cost session 28 a whole re-encode (60.1), is free
here.** 49,664 is 97 sectors because a 256x192 picture and a 256-entry palette
happen to be. It is still *checked* rather than assumed, because the thing being
protected is not tidiness: the channel copies bytes and has no opinion about
them, so a container whose geometry is a byte wrong does not fail, it paints.

### 63.2 The container's OWN BYTES, through px68k's GVRAM code, with no interleave computed

`verify_gvpack.py` (47.2) checks the **layout**: it hands the harness a picture
and the harness computes the interleave. That cannot catch an encoder whose byte
order is wrong, because a container round-trips against its own inverse either
way. `verify_dlxp.py` writes a **DLXP1 record's bytes into GVRAM verbatim** and
asks px68k what they display as.

**256x192 index-exact, letterbox on the reserved black, index 0 never on
screen** — frames 0, 60 and 119. Two negative controls, both mechanisms this
container depends on rather than decoration: **R20 bit 11 clear loses 24,576 px**
(exactly the 128 columns page 1 carries) and **page 1 unscrolled loses 48,958**.

### 63.3 The picture, RE-DERIVED against this project's own builder, and charged the hardware word

This is what the session 30 handoff asked for. 61.9's 34.08 dB was PIL's free
256-colour MEDIANCUT and was filed as "a direction, not the player's number". It
had **two** debts, not one, and the second had gone unnamed: every PSNR this
project has ever quoted — 29.19, 31.33, 34.08 — is measured in the **RGB888
palette domain**, upstream of the X68000's `GGGGGRRRRRBBBBBI` word (23.3). A
packed record carries that word and nothing else, so a player's number has to
come from the other side of it.

PSNR vs the 24-bit source, mean over the same 120-frame window, on the gate
container's own bytes:

| | RGB888 | **GRB555** |
|---|---:|---:|
| CODEC, the gate container (440.4 KB/s) | 29.07 | **28.72** |
| 256c scene palette — the codec's CEILING | 31.32 | **30.79** |
| PACKED, 254c SCENE palette *(the control)* | 31.32 | **30.79** |
| **PACKED CONTAINER, 254c PER-FRAME** | **34.05** | **33.10** |

**61.9's direction survives the real builder: 34.05 against its 34.08.** The two
entries the packed layout reserves — index 0 for the transparency key, 255 for
black — cost **+0.0003 dB**, which is to say nothing at all, and marginally the
right way. 60.3 measured one reserved entry at 0.04 dB; two is not twice that,
it is noise.

**The GRB555 word costs 0.53 dB** and it costs every row of the table, so no
comparison in this project moves because of it. It is stated because a player's
number should be a player's number.

**And the CONTROL is the finding under the headline.** A packed container with
one scene palette lands **exactly on the codec's ceiling, 30.79 dB** — as it
must, because at that point the only difference left between them is VQ. So the
whole of the packed branch's picture advantage over the codec's *ceiling*, +2.31
dB, is **the per-frame palette and nothing else**. Not the packing, not the
literal frames, not 254 colours. One mechanism, and 61.9 named it correctly.

### 63.4 62.5 is priced, and the answer is that the ORDER does not matter and the MISMATCH does

62.5 filed palette-first-or-193rd as a free choice whose severity "depends on how
much the palette moves between consecutive frames, which is a property of the
encoder K2 has not been written yet". It is written now.

| | |
|---|---:|
| palette entries that CHANGE frame to frame | **231.1 of 256 (90%)** |
| palette FIRST — old rows under the new palette | **20.32 dB** (−12.79) |
| palette LAST — new rows under the old palette | **20.33 dB** (−12.78) |

**The two orders are indistinguishable — 0.01 dB apart — so 62.5's choice is a
wash and can be made on other grounds.** The container makes it a flag
(`--palette-last`, flags bit 1) rather than an assumption, so K3 can run both.

**What the same measurement found is not a wash.** A per-frame palette is not a
small delta: 90% of the entries move every frame, and a picture under the
neighbouring frame's palette is **12.8 dB worse than the correct pairing**. The
mismatch is a wipe rather than a flash — rows arrive top to bottom, so part of
the screen is always right, and the transfer is 55.2% of a frame slot (61) —
but at 12 fps that is a colour-scrambled region present for roughly half of
every frame slot, forever.

**And it was LOOKED AT, not only scored.**
`30_packed_container.py --mismatch-png` writes the frame whose mismatch is
closest to the mean — chosen that way so the picture is not an outlier picked to
flatter the number — as correct render | same frame under the next frame's
palette | 24-bit source:

![The palette mismatch: correct, mismatched, source](img/palette-mismatch.png)

**It is chroma speckle and a shifted ground, not a scramble.** Two median-cut
palettes of adjacent frames occupy a similar gamut, so nothing goes
psychedelic — the lava turns red where it should be ochre, the dragon's scales
break into noise, and the torch survives. That is milder than 12.8 dB sounds and
worse than it looks in a still, because the still does not show it arriving and
leaving twelve times a second.

**So B2 stopped being a headroom question and became a picture question, again
and worse.** 61.6 said whether buffer mode blanks decides *which player exists*.
63.4 says that if it does **not** blank, it also decides **which packed
container** exists, because the per-frame palette is what the artefact is made
of. The codec never had this exposure: its palette is scene-constant, so its
tear is old picture against new picture and never old colours against new ones.

**And the fallback is already in the encoder, which is the useful half.**
`pack.py --scene-palette` emits the control row: **30.79 dB, zero palette churn,
no mismatch to have**, still **+2.07 dB on the shipping codec as the display
renders both**, and with `--no-palette` alongside it — a scene palette is loaded
once at scene setup, which is what the codec has always done — the record loses
its 512 B and the wire is **576.0 KB/s against 582.0**, cheaper on the one
resource the packed branch is short of. The per-frame palette is worth +2.31 dB and it is now a **priced**
+2.31 dB rather than a free one.

### 63.5 What this does not settle

- **Nothing about clocks.** 29_packed_player.py owns those, off the measured
  blit, and nothing here moves them: 55.2% of a frame at the 9 clk/B
  dual-address floor, unchanged.
- **Nothing about the medium.** 582.0 KB/s is geometry. Whether anything
  sustains it is **B1**, and this container cannot negotiate — a codec's
  bitrate is a lever and a literal frame's is arithmetic.
- **Nothing on a machine.** No packed frame has been put on screen from a
  container by a 68000 or by a channel. That is **K3**, and 63.2 is the strongest
  statement available without it: the bytes are right, on a second emulator's
  own GVRAM model, with the harness computing nothing.

---

## 64. The packed player runs end to end off the disc — and the write window is the frame (session 32)

**ROADMAP K3.** `src/player/packed.s` is **2,898 bytes** of 68000 code that
brings up its own display, builds its own 193-entry DMA chain, keeps its own
frame clock off V-DISP and fetches every record itself with `READ(10)` off a
CZ-6BS1. `tools/bench/packed.lua` writes **no picture byte, no palette entry and
no CRTC register**; it pushes the code and eleven mailbox words and then reads.
`tools/bench/packed_run.sh` is the gate, `tools/bench/verify_packed.py` the
comparison, `tools/analysis/31_display_duty.py` the arithmetic underneath the
result.

**THE HEADLINE, and it is two facts that point opposite ways.**

**120 of 120 frames are pixel-exact**, every one of them compared, off a real
volume, on a clock the machine keeps itself — the strongest end-to-end result
this project has. And **the picture was on screen for none of the frame slot it
belongs to**, because the write window that a packed frame requires is the whole
of its transfer, and buffer mode blanks the layer it is written through.

### 64.1 What was run, and why every frame had to be checked

`tools/bench/verify_decode.py` checks **one** frame — the last — and that audits
all 120, because the codec is temporally recursive: a SKIP block is a claim that
the previous frame is still in GVRAM. **A packed frame is a LITERAL.** Frame 119
being right says nothing whatever about frame 60. The simplification that
deleted the ring, the codebooks and the decoder also deleted the gate's free
lunch, so `verify_packed.py` snapshots and compares **every frame**, letterbox
included — the 64 static rows are written once at scene setup and never touched
again, so a picture can be pixel-exact while the screen is not.

| | |
|---|---|
| container | `tmp/packed_singe.dlxp`, DLXP1, 120 records of 49,664 B = 97 sectors |
| record `i` | at LBA `1 + i*97` — **arithmetic**, no index, nothing walked |
| chain | **193 entries**, built by the 68000: `$E82000`/512 B, then 192 rows of 256 B a 1,024 B stride apart |
| result | **120 of 120 pixel-exact**, 0 frames unsampled, `FLAG=$FF` |
| passes with the palette LAST too | chain starts `$C08000`/256 instead, **120 of 120 pixel-exact** |

The array is **scene-constant** and the seek is **subtraction**: the packed
layout spends both 256-colour pages, so there is no page to flip, and a record's
length is geometry, so a new pass is `LBA0` again. That is the whole of what K3
deletes, and it deleted it without incident.

### 64.2 The write window is the frame, and the rate it needs is not the rate it costs

The free-running run — the one that asks for record *i+1* the instant record
*i* lands, which is what a 12 fps player becomes the moment the transfer is
longer than the slot — reported a number no budget in this tree has a column
for: **the write window was open on 99.5% of the host frames.** Every frame was
pixel-exact and almost none of them was visible.

It is **arithmetic, not an emulator artefact**. 256-colour GVRAM masks the high
byte of every write unless R20 bit 11 is set (46.5/47.1), and the packed
layout's entire 1.0 B/pixel claim is that one word carries two pixels — so a
packed write *requires* the bit. If buffer mode blanks the layer while the bit is
set (47.4/B2 — MAME says it does, 48.1's prior leans that way), the layer is dark
for exactly as long as the window is open, and for a DMAC-direct player the
window is open for the whole data phase. There is no second page to hide behind:
the packed layout spends both, which is the same fact that made a frame one
channel start (62).

    dark fraction of a slot = record bytes / (DATA-PHASE rate x slot)

**And the rate in that expression is the BURST rate, not the sustained one.**
This is the correction the session had to make to itself. 582.0 KB/s is a
*sustained* requirement and it decides whether record *i* arrives before slot
*i*. The dark fraction is set by how fast bytes move **during the data phase**,
which for a drive with a read-ahead cache can be several times the sustained
figure. **They are independent, and a medium can pass one and fail the other:**

| requirement | figure | status |
|---|---|---|
| sustained, or frames arrive late | **≥ 582.0 KB/s** | B1, known since 63 |
| data phase, or the frame is never displayed | **see below** | **NEW — B1 has no test for it** |

| data phase | transfer | window open | picture on screen |
|---:|---:|---:|---:|
| 582.0 KB/s (= the wire) | 83.33 ms | 100.0% | **0.0%** |
| 700 KB/s | 69.29 ms | 83.1% | 16.9% |
| 1,164 KB/s | 41.67 ms | 50.0% | 50.0% |
| 2,131 KB/s | 22.75 ms | 27.3% | 72.7% |
| 3,000 KB/s | 16.17 ms | 19.4% | 80.6% |

**A medium that exactly meets the sustained requirement delivers every frame, on
time, pixel-exact, and displays none of them.**

**AND THIS REVERSES 61.5's RANKING.** There are two packed players, and the
difference between them is *when* the window is open:

- **A, DMAC-direct** (the one that is built): one channel start, the CPU halted
  or nearly, window open for the whole data phase.
- **B, DMA-to-RAM plus a CPU paint**: the record lands in RAM with the window
  shut, and the 68000 paints it with the packed `movem` blit — **227,553 clocks,
  27.3% of a slot, MEASURED** (`blit.s` V8, 61.4) and **independent of the
  medium**. On screen **72.7% of every slot at any rate that delivers the record
  at all.**

They are equally visible at a data-phase rate of **2,131 KB/s, which is 3.7x the
container's own wire**. Below that — which is every rate anyone has proposed —
**the player with the CPU in the loop is on screen longer than the one without
it.** 61.5 is not wrong; it ranked them in **clocks**, and this is the column
that table does not have:

| W (clk per delivered byte) | A: DMAC-direct | B: DMA + CPU paint |
|---:|---:|---:|
| 5 | 31.0% | 58.4% |
| **9 — the dual-address floor** | **54.9%** | **82.2%** |
| 12 | 72.8% | 100.1% |
| 16 | 96.6% | 123.9% |
| 19 | 114.5% | 141.8% |

Both charge the audio DMA at 10,417 clocks (1.25%, from the IPL ROM's own
channel-3 setup, 52.5); neither has a decoder in it. **B costs 27.3% of a frame
and 99,328 B of RAM** — two record buffers, because at any rate near the wire the
delivery of record *i+1* occupies most of the slot the paint of record *i*
happens in. On a 2 MB machine that is 4.7% of memory, and memory is the resource
the packed branch has spare: the ring it deleted was 256 KB.

### 64.3 Holding the bus costs the frame clock half its ticks — and the clock cannot tell

`src/player/clock.i` counts V-DISP interrupts. A held channel **halts the
68000**. The MFP's pending bit is **one bit**, so every edge that falls inside a
transfer spanning two of them is an edge the machine can **never** count. Nothing
in this project had run a transfer and a clock at once, so nothing could have
seen it.

| configuration, 120 frames | V-DISP edges seen | host frames drawn | lost |
|---|---:|---:|---:|
| **held, paced at 12 fps** | 551 | 1,038 | **487 = 46.9%** |
| stealing, paced at 6 fps | 1,105 | 1,112 | 7 = 0.6% |

**And the player reported ZERO late frames in both.** That is not a reassurance,
it is the finding: the pace gate compares the frame index against `PACE`, and
`PACE` is advanced by the ISR the held channel stops the CPU from running — so a
clock that loses edges loses them from **both sides of the comparison**. The held
player believed it was running at 12 fps; the screen was at **6.37**. The only
thing in the run that can contradict it is the host's raster count, which is why
`packed.lua` reports both and `packed_run.sh` gates on the difference being
non-zero.

The CPU's own account says the same thing from the other end: **held, the 68000
went round its transfer wait 120 times in 120 frames — once each, meaning it
never executed during a single transfer.** Stealing, it went round 1,100,520
times. A player has to keep a clock, read a stick and feed ADPCM; **which of the
two configurations can do any of that is a design question, and this is the run
that answers it.**

### 64.4 The channel configuration does not set the transport's time

Free-running, both configurations delivered the same 49,664 B record within 0.5%
of each other: **90.72 ms stealing, 90.27 ms held** — 534.6 and 537.3 KB/s,
108.9% and 108.3% of a 12 fps slot.

**That figure is a property of the apparatus and is not `W` and not a medium.**
MAME's device models carry no transfer timing (`docs/BENCHMARK.md`, 42.5). What
the pair of runs *does* establish is a **negative that no arithmetic could
have given**: the transfer time is **not the DMAC configuration's to set**. What
a channel configuration buys is **who owns the CPU**, not when the picture
appears. The mechanism behind MAME's own ceiling is **not diagnosed** — it is not
the DMAC (the two configurations agree) and not the CPU (held, the CPU is halted
throughout) — and no MAME source tree was available on this machine to name it.

### 64.5 What this does not settle

- **`W`. Not one clock of it.** Unchanged since 59.
- **B2, whether a real board blanks in buffer mode.** Everything in 64.2 is
  conditional on it, and the condition now decides **which of two packed players
  is built** rather than how much headroom one has. `probe_bit11_blank.lua` is
  still written and still wants a board.
- **The data-phase rate of any real medium.** This is the session's addition to
  **B1**, and it is a measurement nobody has planned: throughput and seek time
  were the two numbers on the list, and **the burst rate during a data phase is a
  third** that decides whether a DMAC-direct packed player shows a picture.
- **Whether B is buildable as described.** It is priced off a measured blit and
  a measured ladder, and no line of it has been written.

---

## 65. Audio has an encoder, and the packed container's best property is what makes it cost (session 33)

**ROADMAP P6**, everything in the item except the bus half session 20 closed.
`tools/encoder/adpcm.py` is the codec, `tools/encoder/extract_audio.py` the
extraction, `tools/bench/verify_adpcm.py` the gate, `tools/analysis/32_audio_wire.py`
the container arithmetic. All of it is **host arithmetic and one emulator
introspection**; no board ran, and the one MAME experiment that was attempted
did not work — 65.5 says so rather than leaving it out.

### 65.1 There is no reference encoder, so the gate had to be built sideways

The X68000's ADPCM is an OKI MSM6258V: 4 bits a sample, two to a byte, 12-bit
signal word, and three rates that are 8 MHz over 512, 768 and 1024. **ffmpeg has
a decoder for the format (`adpcm_ima_oki`) and no encoder**, so there is nothing
to diff an encoder against.

What `verify_adpcm.py` gates instead is the thing that can actually be wrong:
the encoder runs a decoder **inside its own loop** to choose each nibble, and
that decoder is checked **sample-exact against ffmpeg's** over 4,268 nibbles.
An encoder that agrees with its own wrong decoder is exactly the failure mode a
round-trip test cannot see.

Two facts fell out of building it, and both were **measured rather than assumed**:

| | |
|---|---|
| nibble order | **HIGH NIBBLE FIRST** — reading low-first disagrees with ffmpeg on 3,285 of 4,268 samples, and that mismatch is carried as the gate's negative control |
| the step table | 49 entries, **BUILT** as `floor(16 * 1.1**k)` and checked against the published list, so a transcription slip is not one of the things that can be wrong |

On the window this project gates everything on (00223 @539.4 s, 10.000 s, the
same seconds as `tmp/fr_singe`): **156,250 samples → 78,125 B, SNR 21.97 dB**,
and 78,125 B / 10.000 s is **7,812.5 B/s to the byte**, which is 52's figure
arriving from the other direction.

**A negative worth having: the level is not a lever.** The disc's window peaks
at −13.4 dBFS, using 435 of the 12-bit word's 2,048. Normalising it — gain ×4.7,
one sample clipped — moves the SNR from **21.97 dB to 21.97 dB**. The step
table's adaptation covers the range, so there is no headroom win to collect and
no reason to touch the disc's level.

### 65.2 The two available references DISAGREE, and it costs 25 dB

The delta a nibble contributes has two forms in circulation:

    'shift'   delta = ((2*(n&7) + 1) * step) >> 3
    'terms'   delta = step/8 + (n&4)*step + (n&2)*step/2 + (n&1)*step/4,
              each term truncated independently

`'shift'` is what ffmpeg computes — **verified sample-exact here, so that is a
measurement of the decoder that ships, not a reading of its source.** `'terms'`
is the OKI datasheet's own form, the one a chip builds out of shifts and adds,
and it is what MAME's `okim6258` is understood to compute. **That last clause is
NOT verified**: no MAME source tree is on this machine (64.4).

They differ **on 1,000 of 4,268 sampled nibbles, by at most 3 in 12-bit units**,
which reads like something nobody could hear. **It is not.**

| encoded | decoded | SNR |
|---|---|---:|
| `shift` | `shift` | **21.97 dB** |
| `shift` | `terms` | **−2.88 dB** |
| `terms` | `terms` | 21.99 dB |
| `terms` | `shift` | −3.38 dB |

**The noise is louder than the signal.** Per-sample disagreement over the real
window: **max 257, mean 78.2**, against a source whose RMS is 74.4. A 3-LSB
formula difference becomes a 25 dB loss because **ADPCM is RECURSIVE** — the
delta is added to a running predictor and the nibble also moves the step index,
so a disagreement does not stay where it happens. It is the same shape as the
codec's temporal recursion, one dimension down: 64.1 used that recursion to make
one frame audit 120, and here the same property turns a rounding difference into
a broken stream.

**So "which formula does the MSM6258 run" is not a footnote. It is a
precondition on shipping any audio at all**, and it has to be answered before an
encoder's output is committed to a container.

### 65.3 The interleave, and why the obvious cadence is the wrong one

**A packed record is 49,664 B = 97 sectors and its address is `LBA0 + i*97`.
There is no index and none can be needed** — that is the format's whole claim
(63, 64.1). Audio is a stream at a rate with no arithmetic relationship to the
frame rate: at 15,625 Hz a 12 fps slot is **651.0417 B**, and the `.0417` is the
same remainder the frame clock carries (54), because 8 MHz / 512 / 2 / 12 has a
3 in the denominator that no power of two clears.

Give record *i* the audio belonging to slot *i* and the records become variable
length — and the moment records are variable length the format needs an index
and stops being the format. So audio rides a **fixed cadence**: every `F`
frames, `A` whole sectors, placed between records, leaving

    LBA(i) = LBA0 + i*97 + floor(i/F)*A

which is still arithmetic. Choosing `(F, A)` is a rational approximation to
`15625/12288 = 1.271565755` from above, and **the obvious cadence is the worst
point in the space**:

| F | A | lump | needs | padding | wire adds | held (2 lumps) |
|---:|---:|---:|---:|---:|---:|---:|
| **1** — one lump a record | 2 | 1,024 B | 651.0 B | **57.29%** | **12.00 KB/s** | 2,048 B |
| 3 | 4 | 2,048 B | 1,953.1 B | 4.86% | 8.00 KB/s | 4,096 B |
| 7 | 9 | 4,608 B | 4,557.3 B | 1.11% | 7.71 KB/s | 9,216 B |
| **11** | **14** | **7,168 B** | 7,161.5 B | **0.09%** | **7.64 KB/s** | **14,336 B** |
| 81 | 103 | 52,736 B | 52,734.4 B | 0.003% | 7.63 KB/s | 105,472 B |

**F=11 is the pick.** It buys 57.2 points of padding for 12,288 B of RAM over
the naive cadence; the floor of the sweep buys the last 0.09 of a point for
91,136 B more, and on a machine where K4 already wants 99,328 B for two record
buffers that second trade is not one.

**The wire, then:** the packed container's sustained requirement was **582.0 KB/s
silent** and is **589.6 KB/s with sound** (+1.31%). A literal frame's bitrate is
geometry and cannot be talked down; the audio on top of it is 7.63 KB/s of
payload and can only be talked down by choosing a worse chip rate.

### 65.4 And this is the first price anyone has found for the packed branch's own simplification

The codec container **pays none of it**. `rc_fr_singe_scsi_span.dlx` already
carries an index and already has variable records (4,096..41,472 B, sector-aligned
since DLX5), so it can put exactly 651.0417 B of audio in record *i* and pad only
to the sector it was going to pad to anyway: **zero audio padding**, wire
440.4 → 448.1 KB/s.

"A record's length is geometry, so there is no index and none can be needed" is
what makes the packed player a page of arithmetic instead of a parser — and it
is **exactly** the property that makes a second stream at an unrelated rate cost
a cadence, a padding fraction and a 14,336 B buffer. It is a small cost and it
is not zero, and **nothing in FINDINGS 61-64 predicted it**. 64's risk list said
"a simplification that large usually hides something"; this is the first thing
it hid.

The bus half reproduces 52 exactly, which is why the tool prints it: 651.0 B a
slot at the IPL ROM's own channel-3 cost of 16..19 clk/B is **10,417..12,370
clocks = 1.25%..1.48% of a slot**. **The interaction 52 could not have had** is
with 64.2's write window: a DMAC-direct packed player holds the GVRAM window
open for the whole data phase, so an audio channel stealing the bus during that
phase makes the phase longer — audio costs **darkness**, not just clocks. It is
negligible against a dark fraction that is already 1.0, and it is not negligible
against K4's 27.3% paint. That is the third time this session the two players
have ranked differently on a column that is not clocks.

### 65.5 The experiment that did not work, stated rather than omitted

65.2's open question has an obvious apparatus: **MAME's x68000 has the chip**,
so it can be asked. Introspection got as far as fact and no further, and the
facts are worth keeping because the next attempt starts from them rather than
from folklore:

| | |
|---|---|
| device | **`:okim6258`**, shortname `okim6258` — it is there |
| registers | **`$E92001`** and **`$E92003`**, each one byte, read out of the maincpu program map by `tools/bench/probe_adpcm.lua` |
| also on the map | `$E9A000-$E9BFFF`, the PPI that carries ADPCM pan and the clock divider |

**Feeding the chip from Lua produced no audio.** `tools/bench/probe_adpcm2.lua`
writes a control byte to `$E92001` and nibble pairs to `$E92003`;
`probe_adpcm3.lua` sweeps PPI port C at `$E9A005` over all sixteen low-nibble
values with a loud burst under each. **Control 0..3 × port C 0..15: MAME's
`-wavwrite` capture is silent throughout, 0 of 567,360 samples non-zero.**

The register *semantics* are the gap — which control value starts playback,
whether port C needs the PPI's mode word set first, and whether the chip has a
clock at all until the divider is written. **None of that was guessed at further,
because guessing at it is how a rig produces a confident wrong answer.** The way
to do this is from 68000 code with the IPL ROM's own channel-3 DMAC
configuration, which `tools/analysis/21_iplrom_dmac.py` already reads out of the
ROM — the real design, and the one path in the machine that is known to be
correct because Sharp wrote it.

### 65.6 What this does not settle

- **Which delta formula the chip runs.** 65.2, and it is worth 25 dB.
- **Anything on a board.** No hardware ran. The `-wavwrite` silence is a
  statement about an apparatus, not about a chip.
- **The container.** DLXP1 has no audio section; 65.3 is the arithmetic a
  DLXP2 would be built from, and no byte of one has been written.
- **What audio does to a scene change.** The slack table is here, but 51.3's
  refill climb with a second consumer through a real branch point is not.

---

## 66. The chip is asked, and it disagrees with the encoder on all four axes — the largest of them is not the one we were worried about (session 34)

**ROADMAP P6a.** `src/player/adpcm.i`, `src/player/adpcmgate.s`,
`tools/bench/prep_adpcm.py`, `tools/bench/adpcm.lua`,
`tools/bench/adpcm_run.sh`, `tools/bench/verify_adpcm_chip.py`,
`tools/analysis/33_adpcm_model.py`.

**Name the layer.** 68000 code drives the transport; the thing measured is
**MAME 0.277's `okim6258` device model**, end to end through the machine's real
DMA path. It settles the **rig** — an emulated audio test encoded against the
wrong model is 25 dB of nothing — and it does **not** settle the silicon. What a
real MSM6258V does is still a hardware/datasheet item.

### 66.0 A MAME source tree IS reachable from this machine, and 64.4 is struck

FINDINGS 64.4 and `tools/encoder/adpcm.py`'s header both record "no MAME source
tree is on this machine". There is no tree on disk, but the machine has network
and `raw.githubusercontent.com/mamedev/mame/mame0277/...` fetches. That is how
this session designed its experiment rather than swept blindly, and it is worth
recording because two sessions reasoned about MAME's device model as an
unopenable box when it was one `curl` away.

**It does not replace the measurement and did not become one.** The installed
binary is Ubuntu's 0.277 and the tag is upstream's; whether the two are the same
bytes is not something a fetch can say. Everything below is read out of a
capture from the binary that is actually here.

### 66.1 The transport is the IPL ROM's own, and it works first time

`src/player/adpcm.i` programs HD63450 **channel 3** with the bytes
`tools/analysis/21_iplrom_dmac.py` decodes out of the IPL ROM at `$FF0C2E` and
`$FF9A82`: `DCR = $80` (dual address, 8-bit port, cycle steal without hold),
`SCR = $04`, `MFC = DFC = $05`, `CPR = $01`, `DAR = $E92003`, `OCR = $32`
(memory→device, byte, **external request**), `CCR = $80`, then command `$02` to
`$E92001`. 839 bytes moved in **0.1074 s = 7,811.4 B/s** against the format's own
7,812.5, `CSR = $E0`, `CER = $00`, `MTC = 0`. **This is P6b's transport, not
scaffolding.**

**Two things session 33 could not have guessed and did not have to.** 65.5 fed
the chip from Lua, got silence, swept control 0..3 × port C 0..15 and stopped.
Both reasons are ordinary:

* **The PPI's port C is an INPUT until it is told otherwise.** ADPCM pan and the
  sample-rate divider are port C bits; an i8255 out of reset has every port an
  input, so writes to `$E9A005` move a latch nothing is reading. Control word
  `$92` first, and only then does `$08` mean *pan both, ÷512*.
* **`$01` is COMMAND_STOP.** `$02` is PLAY. The sweep that "covered" 0..3 wrote
  `$01` in the probe that swept port C, so the chip was never playing in it.

### 66.2 THE HEADLINE: four axes were wrong, and the expensive one is the NIBBLE ORDER

The probe is 1,678 nibbles — 16 zero nibbles of prologue, a trigger, an encoded
sine, then loud bursts — and `verify_adpcm_chip.py` searches **sixteen candidate
decoder models** (nibble feed × delta formula × clamp × initial accumulator)
crossed with three capture decimations and a prologue length. **Exactly one
reproduces the capture, over 1,678 consecutive samples, sample-exact**, and each
axis carries a negative control: flip it alone and the closest surviving
alternative disagrees on 826, 1,504, 156 and 1,522 samples respectively.

| axis | `adpcm.py` default | **the chip** | cost of getting it wrong ALONE |
|---|---|---|---:|
| nibble order | high first | **LOW first** | **−25.74 dB** |
| delta formula | `shift` | **`terms`** | −2.88 dB |
| clamp | 12-bit | **10-bit** | 0.00 dB *(on this window)* |
| accumulator at PLAY | 0 | **−2** | −0.45 dB |
| **all four at once** | | | **−10.38 dB** against 21.97 |

**65.2 named the wrong axis as the risk.** It priced the delta formula at 25 dB
and left nibble order recorded as "HIGH FIRST, **measured**". That measurement
was real and it was **against ffmpeg**, i.e. about the Dialogic VOX *file*
convention — not about what a chip does with a byte written to its data
register. The two are different questions with different answers, and the one
this port needs is the second. `verify_adpcm.py` keeps ffmpeg's parameters
deliberately: a reference check whose reference has been adjusted to agree is
not a check. `adpcm.CHIP` carries the measured set, and anything that encodes
**for the machine** passes it explicitly.

### 66.3 The clamp is 10-bit, it costs nothing here, and that is the finding that will bite

The MSM6258's D/A is 10-bit and the model clamps the **accumulator** there, so it
is inside the recursion rather than an output scaling. On the Singe window it is
free — encode for 12 bits or for 10 and the answer is **21.99 dB either way,
with zero samples on the clamp** — for one reason only: that window peaks at
**435 of 511**, i.e. **1.4 dB of headroom**, and it is a −13.4 dBFS passage.

A 10-bit accumulator is **12.1 dB smaller** than the 12-bit word the encoder was
clamping to. **65.1's "the level is not a lever" survives downward and is now
wrong upward**: normalising still buys nothing, and a passage a few dB louder
than this one does not fit. **Nothing in this project has measured the loudest
passage on the disc**, so the audio level is an open choice, not a settled one.

### 66.4 A rig fact that cost this session most of its time, and is worth the space

The 8 MHz ADPCM master clock is **CT1 in the YM2151's port register `$1B`**, in a
different device from the divider. MAME delivers that write to the ADPCM chip on
the **sound system's own schedule**, not at the instant of the store — so a
transfer started in the same breath as the setup plays its first ~17 ms at the
previous clock. The symptom is specific and misleading: the capture's first
~130 samples arrive in **exact identical pairs**, the rest do not, and **no model
fits a stream that changed rate part way through** — which reads exactly like a
broken probe. `adpcmgate.s` spins ~100 ms after `ad_setup` and says why. A
player sets its clock once at boot and never meets this.

**The general lesson is the one this tree keeps relearning**: a run that fails to
match is not evidence about the thing being measured until the apparatus has
been shown to be steady. Three quarters of the diagnosis here was spent
disproving hypotheses about the *chip* for a symptom that was about the *clock
write*.

### 66.5 What is still open, stated so it is not read as closed

* **The silicon.** Every value in 66.2 is MAME's. A real MSM6258V may differ on
  any of the four, and the two published references already disagree on one.
  This is a datasheet or a board, and it is cheap on a board: play a known
  nibble stream and record the line out.
* **Nothing has played as audio.** The capture is a measurement instrument, not
  a listening test, and no ADPCM has reached a speaker on real hardware.
* **The encoder is still greedy** (65 risk list, unchanged): exhaustive
  per-sample search, no lookahead. 21.99 dB is this format's floor here.
* **P6b is now unblocked and its bytes are decided**: DLXP2 must be encoded with
  `adpcm.CHIP`, and 65.3's cadence arithmetic (F=11, A=14, wire 582.0 → 589.6
  KB/s) is untouched by any of this — it is a byte count, and none of the four
  axes changes how many bytes a second the format needs.

---

## 67. DLXP2 — a packed container with sound in it, and the padding turns out to be drift

**ROADMAP P6b. Session 35.** `tools/encoder/dlxp.py` (DLXP2),
`tools/encoder/pack.py --audio`, `tools/analysis/34_packed_audio.py`,
`src/player/packed.s` (the third LBA term), `tools/bench/prep_packed.py`,
`tools/bench/packed.lua`.

**NAME THE LAYER.** The container is **host arithmetic**, gated against itself
and against a silent control. The one thing that ran on the emulated 68000 is
the *video* consequence: `packed.s` fetches records out of an interleaved
container and all 120 are still pixel-exact off a real volume. **No audio byte
has been fed to a chip out of this container**, on any layer — the chip gate
(66) feeds a designed stream, not this one.

### 67.1 The format, and what it costs the player: one `divu` and one `mulu`

A DLXP2 is a DLXP1 with a 64-byte header and, from sector 1, **groups**: one
audio lump of `A` sectors, then `F` records.

    record i  =  off_frm + i*rec_bytes + (i//F)*A*512
    lump   k  =  off_aud + k*(F*rec_bytes + A*512)

Neither is a lookup. **The format still has no index and still needs none** —
which was 63/64.1's whole claim for the packed branch, and a second stream at an
unrelated rate is exactly the thing that could have ended it. The lump goes
**before** the group it feeds rather than after it (65.3's formula put it after):
a stream is read forwards, so bytes that arrive after the slot they belong to
are bytes a player had to fetch early anyway.

On the 68000 the third term is **six instructions in `pg_frame`** — a `divu`, an
`andi` to drop the remainder `divu` leaves in the high half, a `mulu` and an
`add` — and **zero instructions of parsing**, because the cadence is two numbers
in the header rather than a table in the stream.

**Measured, on the emulated machine, off a real MB89352 volume: 120 of 120
frames pixel-exact** out of the interleaved container, every one compared. The
interleave moved no picture byte — asserted against a **silent control** built
from the same frames with `--audio` off, all 120 records byte-identical.

### 67.2 The finding: the payload is not the lump

65.3 chose the cadence F=11, A=14 and called the 0.09% "padding". It is padding
on the wire. **It is drift in the player**, and that is a different thing.

A lump is `A*512` = **7,168 B of space**. Eleven frames of audio is
`11*15625/24` = **7,161.4583… B**. So the *payload* alternates **7,161 and
7,162** — the same remainder FINDINGS 54's frame clock carries, one dimension
over — and the last 6.54 B of the sector run are zero.

**A player that fed the chip the whole lump** — the obvious implementation, and
the one the phrase "14 sectors of audio every 11 frames" invites — hands it
6.54 B a group it should not have. That is **0.84 ms of extra audio every
0.9167 s**, and it does not average out:

| play | lip-sync error |
|---|---:|
| 1 min | 0.05 s |
| **22.8 min (the game)** | **1.25 s** |

A second and a quarter is a scene of dialogue arriving after the mouth that
spoke it. So `lump_bytes(k)` is **part of the format**, not a convenience, and
what a player carries is the same shape `clock.i` carries and for the same
reason — a rate whose denominator is 24 cannot be a count:

    acc += 11*15625        ; = 171,875
    n    = acc // 24       ; the MTC for this lump's channel
    acc %= 24

**The general shape, and it is the third time this tree has hit it**: 54's frame
clock, 65.3's `.0417` B a slot, and now this. A ratio with a remainder that is
rounded *once* is a rounding error; rounded *every period* it is a rate error,
and a rate error integrates.

### 67.3 The four ADPCM axes are in the header, and the gate proves they earn it

66 measured which decoder MAME's chip runs and priced getting it wrong at up to
−25.74 dB. DLXP2 carries all four — nibble order, delta formula, clamp width,
the accumulator at PLAY — as **three header fields rather than a version
number**, so a mismatch is legible in a hexdump instead of inferred from a
container's age.

`34_packed_audio.py` decodes the container's own lumps and **flips one axis at a
time**, which is the negative control that makes the fields load-bearing rather
than documentation:

| axis | header | flipped to | SNR | cost |
|---|---|---|---:|---:|
| — | | | **21.99 dB** | |
| nibble order | low | high | −10.00 dB | **−31.99 dB** |
| delta formula | terms | shift | −2.87 dB | **−24.86 dB** |
| clamp | 10 | 12 | 21.99 dB | +0.00 dB |
| accumulator at PLAY | −2 | 0 | 21.50 dB | −0.49 dB |

These are **decode-side** flips on bytes that were encoded correctly, where
66.2's table encoded and decoded on the wrong model together; the two agree on
which axes are expensive and disagree by a few dB on how expensive, which is
what different experiments on the same fact look like. The clamp is still free
**on this window only** and for 66.3's reason: it peaks at 435 of 511.

### 67.4 The failure mode this format has and the codec's does not

A DLX record is found through an index, so a player that reads the wrong entry
gets a length word that does not parse. **A packed record is found by
arithmetic and nothing parses it.** A player that drops the `(i//F)*A` term
reads 97 sectors starting 14 sectors early and *paints them*: the tail of the
previous record, then most of this one, shifted down the screen. It is a
picture. Nothing errors.

And it is invisible where a gate usually looks: **frames 0..10 are byte-identical
either way**. The gate asserts the whole shape — that a cadence-blind read is
wrong for exactly records `F..n-1`, 109 of 120, first at frame 11 — rather than
that some frame differs.

The same argument is why the gate **partitions the file** instead of reading
records back one at a time: an off-by-one that shifts everything after it reads
back fine record by record. 131 spans, no overlap, no gap, ending exactly at the
file's last byte.

### 67.5 The wire, unchanged from the prediction

    video   582.0 KB/s   geometry, no lever
    audio     7.64 KB/s   the cadence's, padding included
    total   589.6 KB/s   +1.31%

**65.3 predicted 589.6 and the container is 589.6** — which is what a byte count
should do, since none of 66's four axes changes how many bytes a second the
format needs. The audio figure charges the padding on purpose: the disc moves
whole sectors and the wire pays for the zero ones.

### 67.6 What is still open

* **No audio has been played out of this container**, on any layer. The chip
  gate (66) fed a designed nibble stream through the IPL ROM's channel-3
  configuration; wiring *this* stream to *that* transport, and running it beside
  the video channel, is P6's remaining quarter.
* **The second consumer has not met a branch point.** 51.3's refill climb with
  audio on the wire is arithmetic in `32_audio_wire.py` and has not been run.
* **The level is still open downward** (66.3), and the loudest passage on the
  disc is still unmeasured.
* **The lump buffer is not allocated anywhere.** 65.3 charges 14,336 B for
  double-buffering the cadence and no player holds it.

## 68. The container is played — and holding the bus costs the audio 463 times the seam (session 36)

**ROADMAP P6c. Session 36.** `src/player/packed.s` (the audio path),
`src/player/dma.i` (`DM_HOOK`), `src/player/scsi.i`, `tools/encoder/adpcm.py`
(`decode_state`), `tools/bench/verify_packed_audio.py`,
`tools/bench/prep_packed.py`, `tools/bench/packed.lua`,
`tools/bench/packed_run.sh`, `tools/bench/check.sh`.

**NAME THE LAYER.** 68000 code fetched an interleaved DLXP2 off a real MB89352
volume, ran the video path against it, and fed the audio lumps to the machine's
**MSM6258 as MAME models it** through the IPL ROM's own HD63450 channel 3. The
capture is MAME's `-wavwrite`. **No board ran**, and every number below is the
emulated machine's. What is new is that a byte of this container has now been
**heard** on some layer, which 67.6 recorded that none had.

### 68.1 It plays, and the gate is the speaker rather than the counters

All **78,125 B** of the container's audio reached the chip, in order, and every
sample the chip produced from them is exact against `adpcm.py` run with the four
axes **out of the container's own header** — **156,257 samples**, `signal =
sample/8` recovering the chip's stream with a worst residual of 1 count.

`packed.s` also reports 11 of 11 lumps armed, 11 fetched, 78,125 B of payload,
**0 starves and 0 re-arms with bytes still outstanding**. Those numbers are not
the gate and must not be: see 68.4.

### 68.2 THE HEADLINE. Held, the bus costs the audio 236 ms of replayed byte

The MSM6258 has no FIFO and **no starvation state**: when its DMA channel counts
out it goes on decoding nibbles out of whatever byte its data register still
holds (MAME `okim6258::sound_stream_update` reads `m_data_in` unconditionally
while PLAYING). So the interval between a channel counting out and the CPU
arming the next lump is not a gap — it is a **held nibble pair driving the
predictor**, and it is measurable in the capture as bytes that were played for
more than two nibbles.

Same container, same player, same 120 frames, one bit of DCR different:

| | stealing | held |
|---|---:|---:|
| audio service calls | **250,240** | **369** |
| ...per frame shown | 2,085 | 3.1 |
| lump boundaries with a seam | 4 of 10 | **10 of 10** |
| worst seam | 2 samples, **0.13 ms** | 1,138 samples, **72.83 ms** |
| total replayed | 8 samples, 0.51 ms | 3,694 samples, **236.42 ms** |
| ...as a share of the audio | 0.0051% | **2.31%** |
| bytes wrong | 0 | 0 |

**The bytes are identical and the sound is not.** Held is 673x fewer looks at
the channel and 463x the seam. A 72.8 ms seam is most of a 12 fps frame of one
byte pair repeating: not a dropout, a buzz, once every 0.92 s.

This is FINDINGS 64.3 arriving on the audio side. 64.3 measured a held channel
costing the frame CLOCK 47% of its ticks *without the clock being able to tell*;
the same halt costs the audio its service, and the audio can tell — in the only
place the interval exists, which is the sound.

**And it is why the seam is small in the stealing configuration at all.** The
one place a 68000 driving this video path has time is **inside the transfer
wait**. Of the 250,240 service calls, **240 are the frame loop's** two-a-frame
and the other **250,000 came from `DM_HOOK`**, dma.i's per-trip hook. Held, the
same player gets 369: the same 240, plus the 129 single trips round the wait
that 131 burst transfers (120 records and 11 lumps) still allow. Servicing the
audio only from the frame loop is a 90 ms seam by construction, in either
configuration — the hook is the whole of the difference.

### 68.3 The drift is measured now, not derived

67.2 computed that feeding the chip the whole 7,168 B lump instead of the
payload runs 0.09% fast, and priced it at 1.25 s of lip-sync over the game. The
accumulator (`acc += F*hz; n = acc/(2*fps); acc %= 2*fps`, three lines in
`pg_apay`) is now in a player and the capture prices what it avoided, over the
10 lumps that carry a whole group:

    payload  71,614 B   against  71,680 B of lump space
    excess       66 B   =  0.092%  =  8.45 ms over 9.17 s
    ->  1.26 s over the game's 22.8 min

**67.2 predicted 1.25 and the machine played 1.26.** The accumulator ends the
scene at 1/24, which is where the arithmetic says it should.

The gate does not merely *check* the payload lengths, it **cannot pass without
them**: the walk accounts for every byte of `DLXP.audio()`, and a whole-lump
player's stream contains 6.54 B of zero at the end of each group that are not in
that stream at all.

### 68.4 Two bugs, and neither is visible from inside the player

**(a) Clearing `DM_BARV` does not unchain a channel.** `dma.i` reads `DM_BARV`
to decide whether to write MAR and MTC, but the register the *channel* obeys is
**OCR bits 3-2**, which `pg_dmacfg` sets to %10 for the whole scene. So the
lump fetch wrote MAR and MTC and the channel ignored both and loaded them from
whatever BAR held (`hd63450.cpp` `dma_transfer_start`). It does not fail as a
bad address: the SPC's phase never completes and the read returns **POLL
TIMEOUT — on the lump and then on every record after it**. A wedged transport
that reads exactly like a disc problem.

**(b) The refill overwrote the lump that was playing.** The resident set is
`AKF - AK + 1` lumps, not `AKF - AK`: `AK` is the *next* lump to arm, so the one
channel 3 is reading is `AK-1` and its slot is not free. Off by one, the fetcher
ran three lumps ahead of a three-slot ring and lump 3 landed on top of lump 0
**while the channel was reading it**.

**Every counter in the player stayed right**: 11 of 11 armed, 11 fetched, 78,125
B of payload, no starve, no late re-arm — and the sound was wrong from **0.2 s**
in. This is 67.4's failure mode arriving on the audio side. Nothing parses a
packed container, so a wrong byte is not an error, it is a sound; the only
instrument that can see it is the stream the chip produced.

### 68.5 The rig fact that shapes the gate: a byte is not always two nibbles

MAME's `okim6258::data_w` sets `m_data_in` **and resets `m_nibble_shift` to 0**.
The DMA channel writes at 7,812.5 B/s and the stream decodes at 15,625 Hz, and
those are two independent clocks — so where a write lands inside a sound-stream
slice decides whether the byte before it was played as two nibbles, as one (the
high nibble dropped), or as three or more.

Measured over the stealing run: **78,120 of 78,125 bytes were played as exactly
two nibbles (99.994%)**, one as one, four as four. So a whole-stream
`decode(data) == capture` cannot be the check, and a tolerance would not be one
either. The gate's model is one line — *byte `b` was played as `c` nibbles from
the cycle `(b&15, b>>4)`, `c >= 1`* — and it finds `c` for every byte, requiring
all `c` samples and 32 samples of continuation to be exact. **Every `c > 2` in
both runs was the last byte of a lump**, asserted, which is what makes the same
walk both the correctness check and the seam measurement.

This is a property of the emulator's audio scheduling, not of the machine and
not of the format. On silicon the chip latches a byte and consumes both nibbles.

### 68.6 What was NOT established

* **Two slots was not tried.** Three lump slots and a prefill of two is what
  ran; the minimum buffering depth is an experiment nobody has done, so 68's
  49,152 B of slot (21,504 B of lump) is an upper bound and not a requirement.
  The slot stride is 16,384 B for a 7,168 B lump to make the address a shift;
  a shipping player should charge `A*512` and pay the `mulu`.
* **The seam figures are this apparatus's.** They are set by how often the CPU
  looks at the channel, which is set by how long the emulated transport takes to
  deliver a record (90.7 ms against a 12 fps slot of 83.3). The *ratio* between
  held and stealing is the finding; the absolute milliseconds are not `W`.
* **Nothing has been listened to.** The capture is an instrument. 66's risk is
  unchanged and so is 66.3's: **the level is still open downward and the loudest
  passage on the disc is still unmeasured.**
* **A second pass does not replay the audio.** `PG_ITER > 1` repeats the video
  and leaves `PG_AK` at `PG_NLUMP`; the run that matters is one pass.
* **The silicon is untouched.** All four decoder axes are still MAME's, and
  session 34's fifth hardware item — play a known nibble stream on a real
  MSM6258V and record the line out — is still the cheap way to settle them.