Dragon-s-Lair-X68k/tools/bench/load.lua

-- Time and verify src/player/load.i on the emulated 68000 (ROADMAP P1+P2).
--
-- Two questions, one run, exactly as decode.lua asks them of the decoder:
--   1. CORRECTNESS.  Does the 68000 produce, out of the RAW container header,
--      byte for byte what tools/bench/dlxload.py produces host-side?  The
--      expanded codebooks are read back out of RAM and the palette out of the
--      PALETTE REGISTERS -- not out of a RAM shadow, because "the words reached
--      $E82000" is the claim being tested.  tools/bench/verify_load.py does the
--      comparison against dlxload.py, so the ground truth stays in one place.
--   2. COST.  How long does it take, split into the codebook expansion and the
--      palette pack, and what is that as a fraction of a 12 fps frame -- the
--      only unit this project prices anything in.
--
-- Nothing here is pre-chewed: the blob pushed into RAM is the first 5,920 bytes
-- of the container as they come off the disc.  That is the whole point of the
-- exercise, and it is also, not incidentally, exactly the read a player has to
-- complete at a scene change before it can draw a single frame.
--
-- MEASUREMENT SCOPE, unchanged from decode.lua: MAME's memory carries no wait
-- states, so these are pure 68000 instruction cycles -- a LOWER BOUND on real
-- hardware.  Interrupts are masked (SR=$2700).  The host clock has 1/55.46 s
-- granularity and the job takes milliseconds, so each configuration is repeated
-- LITER times and divided; repeating is honest because do_load is not
-- temporally recursive -- every pass rewrites what the last one wrote, from the
-- same source bytes.

M = manager.machine
SP = M.devices[":maincpu"].spaces["program"]

local function findfile(n)
  for _,p in ipairs{"../tools/bench/"..n, "tools/bench/"..n, n} do
    local f = io.open(p,"rb"); if f then f:close(); return p end
  end
  error(n.." not found")
end
local MODE = loadfile(findfile("crtc_mode.lua"))()
local META = loadfile("load_meta.lua")()

local LFLAG, LHDR, LDARK = 0x18040, 0x18044, 0x18048
local LK1, LK4, LMODE, LITER = 0x1804C, 0x18050, 0x18054, 0x18058
local CB1, CB4, RAW = 0x20000, 0x22000, 0x30000
local GPAL           = 0xE82000
local CPUHZ          = 10000000        -- x68k.cpp:1133, 40_MHz_XTAL/4
local FPS            = 12
local FRAME12        = CPUHZ / FPS
local ITER           = tonumber(os.getenv("DLX_LOAD_ITER") or "40")

local code do local f=io.open("loadgate.bin","rb"); code=f:read("a"); f:close() end
local data do local f=io.open("load_data.bin","rb"); data=f:read("a"); f:close() end

local function T() local t=M.time; return t.seconds + t.attoseconds/1e18 end
local function P(s) print("[LOD] "..s) end

local function push(addr, s, from, len)
  local i, n = from, len
  while n >= 4 do
    SP:write_u32(addr, (string.unpack(">I4", s, i)))
    addr, i, n = addr+4, i+4, n-4
  end
  while n > 0 do
    SP:write_u8(addr, string.byte(s,i)); addr, i, n = addr+1, i+1, n-1
  end
end

-- Poison every destination before each run.  Without this a stage that wrote
-- NOTHING would still compare equal to the previous stage's output, and the
-- palette-only run would "pass" the codebook check for free.
--
-- The three scratch tables are poisoned only before a run that CLAIMS to build
-- them (mode bit 2).  They are scene-independent, so the palette-entry stage is
-- entitled to find them already there -- that is the whole point of measuring
-- it separately -- but a stage that says it builds them must be shown to.
local P6TAB, TABEND = 0x19000, 0x19340
local function poison(mode)
  for a = CB1, CB1 + META.cb1_len - 2, 2 do SP:write_u16(a, 0xDEAD) end
  for a = CB4, CB4 + META.cb4_len - 2, 2 do SP:write_u16(a, 0xDEAD) end
  for c = 0, 255 do SP:write_u16(GPAL + c*2, 0xDEAD) end
  SP:write_u32(LDARK, 0xFFFFFFFF)
  if mode & 4 ~= 0 then
    for a = P6TAB, TABEND - 2, 2 do SP:write_u16(a, 0xDEAD) end
  end
end

local function setup()
  MODE.apply(SP)
  push(RAW, data, 1, META.raw_len)
  for i = 1, #code do SP:write_u8(0x10000+i-1, string.byte(code,i)) end
  P(string.format("loaded loadgate.bin=%d B, raw container header %d B at 0x%X",
                  #code, META.raw_len, RAW))
end

local function launch(mode, iter)
  poison(mode)
  SP:write_u32(LFLAG, 0)
  SP:write_u32(LHDR,  RAW)
  SP:write_u32(LMODE, mode)
  SP:write_u32(LITER, iter)
  local cpu = M.devices[":maincpu"]
  cpu.state["SR"].value = 0x2700          -- supervisor, ALL interrupts masked
  cpu.state["SP"].value = 0x8000
  cpu.state["PC"].value = 0x10000
end

-- Written after the mode-3 run, and only after it: it is the output of ONE
-- do_load call over the whole header, which is what the player does.
local function dump()
  local out = io.open("load_out.bin", "wb")
  for a = CB1, CB1 + META.cb1_len - 1 do out:write(string.char(SP:read_u8(a))) end
  for a = CB4, CB4 + META.cb4_len - 1 do out:write(string.char(SP:read_u8(a))) end
  for c = 0, 255 do out:write(string.pack(">I2", SP:read_u16(GPAL + c*2) & 0xFFFF)) end
  out:close()
  P(string.format("dumped %d B of 68000 output to tmp/load_out.bin", 
                  META.cb1_len + META.cb4_len + 512))
  P(string.format("DARK=%d (host-side dlxload.py says %d), K1=%d K4=%d",
                  SP:read_u32(LDARK), META.dark, SP:read_u32(LK1), SP:read_u32(LK4)))
end

-- Order matters: the scratch tables are built by the first stage and the
-- palette-entry stage runs on them, which is exactly how a player would be
-- arranged.  The two stages that stand for real player events -- boot, and a
-- scene change -- come last, and the dump the verifier checks is taken from the
-- BOOT one, so the path that is proved correct is the one that builds
-- everything from nothing.
local PLAN = {
  {name="scratch tables only (boot, once)",           mode=4, iter=ITER},
  {name="codebook expansion only (P1)",               mode=1, iter=ITER},
  {name="palette entries only (P2)",                  mode=2, iter=ITER},
  {name="BOOT: tables + codebooks + palette",         mode=7, iter=ITER, dump=true},
  {name="SCENE CHANGE: codebooks + palette",          mode=3, iter=ITER},
}

local step, st, t0 = 0, "boot", nil
local results = {}

SUB = emu.add_machine_frame_notifier(function()
  local ok, err = pcall(function()
    local t = T()
    if st == "boot" then
      if t < 3.0 then return end
      setup(); step = 1; launch(PLAN[1].mode, PLAN[1].iter)
      st, t0 = "running", nil; return
    end
    if st == "running" then
      local fl = SP:read_u32(LFLAG)
      if fl == 1 and not t0 then t0 = t; return end
      if fl == 0xEE then
        P("BAD HEADER -- load.i did not find the 'DLX3' magic at LHDR")
        M:exit(); return
      end
      if fl == 0xFF then
        local p = PLAN[step]
        local dt = t - (t0 or t)
        local cyc = dt * CPUHZ / p.iter
        results[#results+1] = {name=p.name, cyc=cyc}
        P(string.format("%s: %d passes in %.4f s -> %.0f cycles = %.1f%% of a "
                        .."%dfps frame (%.2f ms)", p.name, p.iter, dt, cyc,
                        100*cyc/FRAME12, FPS, 1000*cyc/CPUHZ))
        if p.dump then dump() end
        step = step + 1
        if PLAN[step] then launch(PLAN[step].mode, PLAN[step].iter); st, t0 = "running", nil
        else st = "finish" end
        return
      end
      if t > 400 then P("TIMEOUT flag="..string.format("%08X",fl)); M:exit() end
      return
    end
    if st == "finish" then
      P("---- summary (instruction cycles only; real RAM adds wait states) ----")
      for _,r in ipairs(results) do
        P(string.format("   %-44s %8.0f cyc  %5.1f%% of a frame  %6.2f ms",
                        r.name, r.cyc, 100*r.cyc/FRAME12, 1000*r.cyc/CPUHZ))
      end
      P("done")
      M:exit()
    end
  end)
  if not ok then print("[LOD] LUA ERROR: "..tostring(err)); M:exit() end
end)